Drinking water in 93086
One supply zone, water supplier: Wörth an der Donau.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
woerth-an-der-donau gesamt
Wörth an der DonauAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 18/08/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 38 mg/l | 50 mg/l | 76 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Sulphate | 38 mg/l | 250 mg/l | 15 % | Single value |
| Sodium | 28,9 mg/l | 200 mg/l | 14 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (68 — most recent value per parameter)
Chemical parameters (46)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,0005 mg/l below limit of quantification | 3 µg/l | < 17 % * | Single value |
| 2,6-Dichlorobenzamide (BAM) | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Antimony | <0,0005 mg/l below limit of quantification | 5 µg/l | < 10 % * | Single value |
| Arsenic | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Atrazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Bentazone | <0,000015 (NWG) mg/l not detectable | — | — | Single value |
| Benzene | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Benzo(a)pyrene | <0,000002 mg/l below limit of quantification | 10 ng/l | < 20 % * | Single value |
| Benzo(b)fluoranthene | <0,000002 mg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0,000002 mg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0,000002 mg/l below limit of quantification | — | — | Single value |
| Bisphenol A | <0,000050 (NWG) mg/l not detectable | 2.5 µg/l | — | Single value |
| Boron | 0,03 mg/l | 1 mg/l | 3 % | Single value |
| Bromate | <0,0030 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value |
| Bromodichloromethane | <0,0002 mg/l below limit of quantification | — | — | Single value |
| Cadmium | <0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Single value |
| Chromium | <0,00050 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | <0,005 mg/l below limit of quantification | 2 mg/l | < 0.3 % * | Single value |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Desethylatrazine | 0,000013 mg/l | — | — | Single value |
| Desethylterbuthylazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Desisopropylatrazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Dibromochloromethane | <0,0002 mg/l below limit of quantification | — | — | Single value |
| Dichlorprop | <0,000010 (NWG) mg/l not detectable | — | — | Single value |
| Diuron | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,13 mg/l | 1.5 mg/l | 9 % | Single value |
| Isoproturon | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mecoprop | <0,00001 (NWG) mg/l not detectable | — | — | Single value |
| Mercury | <0,00010 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metazachlor | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Nickel | <0,002 mg/l below limit of quantification | 20 µg/l | < 10 % * | Single value |
| Nitrate | 38 mg/l | 50 mg/l | 76 % | Single value |
| Nitrite | <0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Single value |
| Polycyclic aromatic hydrocarbons | 0 mg/l | 0.1 µg/l | 0 % | Single value |
| Selenium | 0,0005 mg/l | 10 µg/l | 5 % | Single value |
| Simazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene and Trichloroethene (sum) | 0 mg/l | 10 µg/l | 0 % | Single value |
| Tribromomethane (bromoform) | <0,0003 mg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | 0 mg/l | 50 µg/l | 0 % | Single value |
| Uranium | 0,0014 mg/l | 10 µg/l | 14 % | Single value |
| Vinyl chloride | <0,0001 mg/l below limit of quantification | 0.5 µg/l | < 20 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (13)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,020 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Ammonium | 0,01 mg/l | 0.5 mg/l | 2 % | Single value |
| Calcite dissolution capacity | -34 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 59,0 mg/l | 250 mg/l | 24 % | Single value |
| Conductivity (25 °C) | 836 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| pH | 7,32 | 6,5–9,5 | — | Single value |
| Sodium | 28,9 mg/l | 200 mg/l | 14 % | Single value |
| Sulphate | 38 mg/l | 250 mg/l | 15 % | Single value |
| Temperature | 13,0 °C | — | — | Single value |
| Total organic carbon (TOC) | 0,7 mg/l | ohne anormale Veränderung | — | Single value |
| Turbidity | <0,05 NTU below limit of quantification | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 6,12 mmol/l | — | — | Single value |
| Base capacity to pH 8.2 | 0,51 mmol/l | — | — | Single value |
| Calcium | 116 mg/l | — | — | Single value |
| Carbonate hardness | 17,0 °dH | — | — | Single value |
| Free carbon dioxide | 22 mg/l | — | — | Single value |
| Hardness range (WRMG) | hart | — | — | Single value |
| Magnesium | 24,0 mg/l | — | — | Single value |
| Potassium | 2,3 mg/l | — | — | Single value |
| Total hardness | 3,88 mmol/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 93086
- How hard is the water in Postcode 93086?
- Wörth an der Donau publishes a total hardness of 3,88 mmol/l for the supply zone woerth-an-der-donau gesamt — that corresponds to 21.8 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 03.09.2025, retrieved on 13/07/2026.
- How much nitrate is in the drinking water in Postcode 93086?
- Wörth an der Donau publishes a nitrate value of 38 mg/l for the supply zone woerth-an-der-donau gesamt. The statutory parametric value is 50 mg/l; the measured value represents 76 % of the parametric value. Basis: 03.09.2025, retrieved on 13/07/2026.
- Who supplies the drinking water in Postcode 93086?
- Wörth an der Donau. The values shown here come from the supply zone woerth-an-der-donau gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.