Drinking water in 92637
One supply zone, water supplier: Stadtwerke Weiden i.d.OPf. AdöR.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Öffentliche WV Weiden, HB 3, gesamt rein (Probenahmeort: HB 3)
Stadtwerke Weiden i.d.OPf. AdöRAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
Water hardness
9 °dH
Hardness range medium
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of PFAS | <0,040 µg/l below limit of quantification | 0.1 µg/l | < 40 % * | Single value |
| Nitrate | 8,93 mg/l | 50 mg/l | 18 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Single value |
| Sulphate | 29 mg/l | 250 mg/l | 12 % | Single value |
| Sodium | 3,38 mg/l | 200 mg/l | 2 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (126 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100 ml | 0/100 ml | — | Single value |
Chemical parameters (75)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,3 µg/l below limit of quantification | 3 µg/l | < 10 % * | Single value |
| 2,4-D | <0,02 µg/l below limit of quantification | — | — | Single value |
| Antimony | <0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Atrazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Azoxystrobin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bentazone | <0,02 µg/l below limit of quantification | — | — | Single value |
| Benzene | <0,3 µg/l below limit of quantification | 1 µg/l | < 30 % * | Single value |
| Benzo(a)pyrene | <0,002 µg/l below limit of quantification | 10 ng/l | < 20 % * | Single value |
| Benzo(b)fluoranthene | <0,01 µg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0,01 µg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0,01 µg/l below limit of quantification | — | — | Single value |
| Bisphenol A | <0,05 µg/l below limit of quantification | 2.5 µg/l | < 2 % * | Single value |
| Boron | <0,010 mg/l below limit of quantification | 1 mg/l | < 1 % * | Single value |
| Boscalid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromacil | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromate | <0,003 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value |
| Bromoxynil | <0,02 µg/l below limit of quantification | — | — | Single value |
| Cadmium | <0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Carbendazim | <0,02 µg/l below limit of quantification | — | — | Single value |
| Carbetamide | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chloridazon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chlorotoluron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chromium | 0,00081 mg/l | 25 µg/l | 3 % | Single value |
| Clopyralid | <0,05 µg/l below limit of quantification | — | — | Single value |
| Copper | <0,001 mg/l below limit of quantification | 2 mg/l | < < 0.1 % * | Single value |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Desethylatrazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dicamba | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dichlorprop | <0,02 µg/l below limit of quantification | — | — | Single value |
| Diflufenican | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimefuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethenamid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethoate | <0,02 µg/l below limit of quantification | — | — | Single value |
| Diuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Ethidimuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Ethofumesate | <0,02 µg/l below limit of quantification | — | — | Single value |
| Flufenacet | <0,02 µg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,071 mg/l | 1.5 mg/l | 5 % | Single value |
| Glyphosate | <0,05 µg/l below limit of quantification | — | — | Single value |
| Imidacloprid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Indeno(1,2,3-cd)pyrene | <0,01 µg/l below limit of quantification | — | — | Single value |
| Isoproturon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Lenacil | <0,02 µg/l below limit of quantification | — | — | Single value |
| MCPA | <0,02 µg/l below limit of quantification | — | — | Single value |
| Mecoprop | <0,02 µg/l below limit of quantification | — | — | Single value |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metalaxyl | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metamitron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metazachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metobromuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metolachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metribuzin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nickel | <0,001 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nicosulfuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nitrate | 8,93 mg/l | 50 mg/l | 18 % | Single value |
| Nitrite | <0,005 mg/l below limit of quantification | 0.5 mg/l | < 1 % * | Single value |
| Pendimethalin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Pesticides — Total | --- µg/l not determined | 0.5 µg/l | — | Single value |
| Propazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Propiconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Prosulfocarb | <0,02 µg/l below limit of quantification | — | — | Single value |
| Quinmerac | <0,02 µg/l below limit of quantification | — | — | Single value |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Simazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tebuconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | <0,1 µg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene and Trichloroethene (sum) | -- µg/l not determined | 10 µg/l | — | Single value |
| Thiacloprid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Triadimenol | <0,02 µg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <1 µg/l below limit of quantification | — | — | Single value |
| Uranium | 0,004 mg/l | 10 µg/l | 40 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (22)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorodecanoic acid (PFDA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorododecane sulfonic acid (PFDoDS) | <0,005 µg/l below limit of quantification | — | — | Single value |
| Perfluorododecanoic acid (PFDoDA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorohexane sulfonic acid (PFHxS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | <0,005 µg/l below limit of quantification | — | — | Single value |
| Perfluorononanoic acid (PFNA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorooctanesulfonic acid (PFOS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorooctanoic acid (PFOA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanesulfonic acid (PFTrDS) | <0,005 µg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanoic acid (PFTrDA) | <0,005 µg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanesulfonic acid (PFUnDS) | <0,005 µg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanoic acid (PFUnDA) | <0,001 µg/l below limit of quantification | — | — | Single value |
| Sum of 4 PFAS | <0,004 µg/l below limit of quantification | — | — | Single value |
| Sum of PFAS | <0,040 µg/l below limit of quantification | 0.1 µg/l | < 40 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (18)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | 0,023 mg/l | 0.5 mg/l | 5 % | Single value |
| Calcite dissolution capacity | -0,9 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 13,3 mg/l | 250 mg/l | 5 % | Single value |
| Coliform bacteria | 0 KBE/100 ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Conductivity (25 °C) | 349 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | <0,010 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Manganese | <0,003 mg/l below limit of quantification | 50 µg/l | < 6 % * | Single value |
| Odour | ohne -- | für den Verbraucher annehmbar | — | Single value |
| pH | 8,0 -- | 6,5–9,5 | — | Single value |
| Sodium | 3,38 mg/l | 200 mg/l | 2 % | Single value |
| Sulphate | 29 mg/l | 250 mg/l | 12 % | Single value |
| Taste | ohne -- | für den Verbraucher annehmbar | — | Single value |
| Temperature | 7,3 °C | — | — | Single value |
| Total organic carbon (TOC) | <0,50 mg/l below limit of quantification | ohne anormale Veränderung | — | Single value |
| Turbidity | <0,05 FNU below limit of quantification | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 2,44 mmol/l | — | — | Single value |
| Acid capacity to pH 8.2 | --- mmol/l not determined | — | — | Single value |
| Base capacity to pH 8.2 | <0,100 mmol/l below limit of quantification | — | — | Single value |
| Calcium | 39,5 mg/l | — | — | Single value |
| Copper quotient | 7,90 -- | — | — | Single value |
| Magnesium | 15,0 mg/l | — | — | Single value |
| Phosphate | 0,039 mg/l | — | — | Single value |
| Potassium | 6,31 mg/l | — | — | Single value |
| Total hardness | 9,0 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.stadtwerke-weiden.de/_Resources/Persistent/9/3/4/4/9344b71311c3fb2e71c07d1fa9e5866c6116e35a/Wasseranalyse.pdf · 24.03.2026 · Probenahme 03.03.2026, Prüfzeitraum 03.03.2026 - 24.03.2026 · retrieved on 11/07/2026
Frequent questions about postcode 92637
- How hard is the water in Postcode 92637?
- Stadtwerke Weiden i.d.OPf. AdöR publishes a total hardness of 9 °dH for the supply zone Öffentliche WV Weiden, HB 3, gesamt rein (Probenahmeort: HB 3) (hardness range medium). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 24.03.2026, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Postcode 92637?
- Stadtwerke Weiden i.d.OPf. AdöR publishes a nitrate value of 8,93 mg/l for the supply zone Öffentliche WV Weiden, HB 3, gesamt rein (Probenahmeort: HB 3). The statutory parametric value is 50 mg/l; the measured value represents 18 % of the parametric value. Basis: 24.03.2026, retrieved on 11/07/2026.
- Are PFAS detectable in the drinking water in Postcode 92637?
- Stadtwerke Weiden i.d.OPf. AdöR publishes for the supply zone Öffentliche WV Weiden, HB 3, gesamt rein (Probenahmeort: HB 3) a sum value PFAS-20 below the limit of quantification (entry in the report: "<0,040 µg/l"). This is not to be read as "PFAS-free": below the limit of quantification, the measurement cannot make any statement. The statutory parametric value is 0.1 µg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: 24.03.2026, retrieved on 11/07/2026.
- Who supplies the drinking water in Postcode 92637?
- Stadtwerke Weiden i.d.OPf. AdöR. The values shown here come from the supply zone Öffentliche WV Weiden, HB 3, gesamt rein (Probenahmeort: HB 3) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.