Drinking water in 91091
One supply zone, water supplier: Erlanger Stadtwerke AG.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Seebachgruppe
Erlanger Stadtwerke AGAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7 mg/l | 50 mg/l | 14 % | Mean |
| Escherichia coli (E. coli) | 0 in 100 ml | 0/100 ml | — | Mean |
| Sulphate | 20 mg/l | 250 mg/l | 8 % | Mean |
| Sodium | 11 mg/l | 200 mg/l | 5 % | Mean |
Show all recorded parameters (38 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 in 100 ml | 0/100 ml | — | Mean |
| Intestinal enterococci | 0 in 100 ml | 0/100 ml | — | Mean |
Chemical parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,00010 mg/l below limit of quantification | 3 µg/l | < 3 % * | Mean |
| Arsenic | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Boron | <0,04 mg/l below limit of quantification | 1 mg/l | < 4 % * | Mean |
| Fluoride | <0,2 mg/l below limit of quantification | 1.5 mg/l | < 13 % * | Mean |
| Nitrate | 7 mg/l | 50 mg/l | 14 % | Mean |
| Nitrite | <0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Mean |
| Pesticides — Total | n.n. mg/l not detectable | 0.5 µg/l | — | Mean |
| Trihalomethanes — Total | 0,005 mg/l | 50 µg/l | 10 % | Mean |
| Uranium | 0,002 mg/l | 10 µg/l | 20 % | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (16)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Mean |
| Ammonium | <0,04 mg/l below limit of quantification | 0.5 mg/l | < 8 % * | Mean |
| Calcite dissolution capacity | 0 mg/l CaCO3 | 5 mg/l CaCO3 | — | Mean |
| Chloride | 15 mg/l | 250 mg/l | 6 % | Mean |
| Coliform bacteria | 0 in 100 ml | 0/100 ml | — | Mean |
| Colony count 22 °C | 0 in 1 ml | ohne anormale Veränderung | — | Mean |
| Colony count 36 °C | 0 in 1 ml | ohne anormale Veränderung | — | Mean |
| Conductivity (25 °C) | 526 µS/cm | 2,790 µS/cm | — | Mean |
| Iron | <0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Mean |
| Manganese | <0,01 mg/l below limit of quantification | 50 µg/l | < 20 % * | Mean |
| pH | 7,68 | 6,5–9,5 | — | Mean |
| Sodium | 11 mg/l | 200 mg/l | 5 % | Mean |
| Sulphate | 20 mg/l | 250 mg/l | 8 % | Mean |
| Temperature | 13,3 °C | — | — | Mean |
| Total organic carbon (TOC) | 0,7 mg/l | ohne anormale Veränderung | — | Mean |
| Turbidity | 0,11 FNU | 1 NTU | — | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 4,6 mmol/l | — | — | Mean |
| Base capacity to pH 8.2 | 0,27 mmol/l | — | — | Mean |
| Calcium | 69 mg/l | — | — | Mean |
| Carbonate hardness | 12,83 °dH | — | — | Mean |
| Hardness range (WRMG) | 2 | — | — | Mean |
| Hydrogen carbonate | 280 mg/l | — | — | Mean |
| Magnesium | 18,8 mg/l | — | — | Mean |
| Oxygen | 9,6 mg/l | — | — | Mean |
| Phosphate | 0,31 mg/l | — | — | Mean |
| Potassium | 2,2 mg/l | — | — | Mean |
| Sum of alkaline earth metals | 2,48 mmol/l | — | — | Mean |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 91091
- How hard is the water in Postcode 91091?
- Erlanger Stadtwerke AG publishes the hardness range 2 for the supply zone Seebachgruppe. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 25.07.2025, retrieved on 13/07/2026.
- How much nitrate is in the drinking water in Postcode 91091?
- Erlanger Stadtwerke AG publishes a nitrate value of 7 mg/l for the supply zone Seebachgruppe. The statutory parametric value is 50 mg/l; the measured value represents 14 % of the parametric value. Basis: 25.07.2025, retrieved on 13/07/2026.
- Who supplies the drinking water in Postcode 91091?
- Erlanger Stadtwerke AG. The values shown here come from the supply zone Seebachgruppe and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.