Drinking water in 87778
One supply zone, water supplier: Wasserversorgung Gemeinde Stetten.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Brunnen 2 Stetten
Wasserversorgung Gemeinde StettenAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 07/08/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | <2,2 mg/l below limit of quantification | 50 mg/l | < 4 % * | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Sulphate | 7,4 mg/l | 250 mg/l | 3 % | Single value |
| Sodium | 50 mg/l | 200 mg/l | 25 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (85 — most recent value per parameter)
Chemical parameters (68)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Single value |
| 2,4-D | <0,02 µg/l below limit of quantification | — | — | Single value |
| Antimony | <0,0003 mg/l below limit of quantification | 5 µg/l | < 6 % * | Single value |
| Arsenic | 0,0002 mg/l | 10 µg/l | 2 % | Single value |
| Atrazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Azoxystrobin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bentazone | <0,02 µg/l below limit of quantification | — | — | Single value |
| Benzene | <0,0003 mg/l below limit of quantification | 1 µg/l | < 30 % * | Single value |
| Benzo(a)pyrene | <0,000003 mg/l below limit of quantification | 10 ng/l | < 30 % * | Single value |
| Bisphenol A | <0,04 µg/l below limit of quantification | 2.5 µg/l | < 2 % * | Single value |
| Boron | <0,1 mg/l below limit of quantification | 1 mg/l | < 10 % * | Single value |
| Boscalid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromacil | <0,02 µg/l below limit of quantification | — | — | Single value |
| Bromate | <0,002 mg/l below limit of quantification | 10 µg/l | < 20 % * | Single value |
| Bromoxynil | <0,02 µg/l below limit of quantification | — | — | Single value |
| Cadmium | <0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Carbendazim | <0,02 µg/l below limit of quantification | — | — | Single value |
| Carbetamide | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chloridazon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chlorotoluron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Chromium | 0,0003 mg/l | 25 µg/l | 1 % | Single value |
| Clopyralid | <0,05 µg/l below limit of quantification | — | — | Single value |
| Copper | <0,003 mg/l below limit of quantification | 2 mg/l | < 0.2 % * | Single value |
| Desethylatrazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dicamba | <0,05 µg/l below limit of quantification | — | — | Single value |
| Dichlorprop | <0,02 µg/l below limit of quantification | — | — | Single value |
| Diflufenican | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimefuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethenamid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Dimethoate | <0,02 µg/l below limit of quantification | — | — | Single value |
| Diuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Ethidimuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Ethofumesate | <0,02 µg/l below limit of quantification | — | — | Single value |
| Flufenacet | <0,02 µg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,46 mg/l | 1.5 mg/l | 31 % | Single value |
| Glyphosate | <0,05 µg/l below limit of quantification | — | — | Single value |
| Imidacloprid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Isoproturon | <0,02 µg/l below limit of quantification | — | — | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Lenacil | <0,02 µg/l below limit of quantification | — | — | Single value |
| MCPA | <0,02 µg/l below limit of quantification | — | — | Single value |
| Mecoprop | <0,02 µg/l below limit of quantification | — | — | Single value |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metalaxyl | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metamitron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metazachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metobromuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metolachlor | <0,02 µg/l below limit of quantification | — | — | Single value |
| Metribuzin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nickel | <0,003 mg/l below limit of quantification | 20 µg/l | < 15 % * | Single value |
| Nicosulfuron | <0,02 µg/l below limit of quantification | — | — | Single value |
| Nitrate | <2,2 mg/l below limit of quantification | 50 mg/l | < 4 % * | Single value |
| Nitrite | 0,06 mg/l | 0.5 mg/l | 12 % | Single value |
| Pendimethalin | <0,02 µg/l below limit of quantification | — | — | Single value |
| Polycyclic aromatic hydrocarbons | <0,00003 mg/l below limit of quantification | 0.1 µg/l | < 30 % * | Single value |
| Propazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Propiconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Prosulfocarb | <0,02 µg/l below limit of quantification | — | — | Single value |
| Quinmerac | <0,02 µg/l below limit of quantification | — | — | Single value |
| Selenium | <0,002 mg/l below limit of quantification | 10 µg/l | < 20 % * | Single value |
| Simazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tebuconazole | <0,02 µg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0,02 µg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene and Trichloroethene (sum) | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Thiacloprid | <0,02 µg/l below limit of quantification | — | — | Single value |
| Triadimenol | <0,02 µg/l below limit of quantification | — | — | Single value |
| Uranium | <0,0005 mg/l below limit of quantification | 10 µg/l | < 5 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (13)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | 0,002 mg/l | 0.2 mg/l | 1 % | Single value |
| Ammonium | 0,18 mg/l | 0.5 mg/l | 36 % | Single value |
| Chloride | <0,80 mg/l below limit of quantification | 250 mg/l | < 0.3 % * | Single value |
| Conductivity (25 °C) | 451 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | 0,04 mg/l | 0.2 mg/l | 20 % | Single value |
| Manganese | 0,007 mg/l | 50 µg/l | 14 % | Single value |
| Odour | ohne Auffälligkeit - | für den Verbraucher annehmbar | — | Single value |
| pH | 7,88 (14,1°C) - | 6,5–9,5 | — | Single value |
| Sodium | 50 mg/l | 200 mg/l | 25 % | Single value |
| Sulphate | 7,4 mg/l | 250 mg/l | 3 % | Single value |
| Taste | ohne Auffälligkeit - | für den Verbraucher annehmbar | — | Single value |
| Total organic carbon (TOC) | 1,0 mg/l | ohne anormale Veränderung | — | Single value |
| Turbidity | 0,18 NTU | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 25,8 mg/l | — | — | Single value |
| Magnesium | 18,3 mg/l | — | — | Single value |
| Phosphate | <0,10 mg/l below limit of quantification | — | — | Single value |
| Potassium | 1,1 mg/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 87778
- How much nitrate is in the drinking water in Postcode 87778?
- Wasserversorgung Gemeinde Stetten publishes a nitrate value of <2,2 mg/l for the supply zone Brunnen 2 Stetten. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: Publication by the water supplier, retrieved on 27/07/2026.
- Who supplies the drinking water in Postcode 87778?
- Wasserversorgung Gemeinde Stetten. The values shown here come from the supply zone Brunnen 2 Stetten and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.