Skip to content
maunawai.info

Drinking water in 87616

For this postcode Wasserwerk Marktoberdorf (Stadt Marktoberdorf) publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 4 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
19.9 °dH
Hardness range 3 (hart)
Key values Bertoldshofen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9,9 mg/l 50 mg/l
20 %
Single value · Bertoldshofen
Sulphate 6,1 mg/l 250 mg/l
2 %
Single value · Bertoldshofen
Sodium 6,7 mg/l 200 mg/l
3 %
Single value · Bertoldshofen
Show all recorded parameters (11 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Bertoldshofen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9,9 mg/l 50 mg/l
20 %
Single value · Bertoldshofen

Indicator parameters (4)

Indicator parameters – Bertoldshofen
Parameter Value Parametric value Share of the parametric value Reference
Chloride 10,0 mg/l 250 mg/l
4 %
Single value · Bertoldshofen
pH 7,26 6,5–9,5 Single value · Bertoldshofen
Sodium 6,7 mg/l 200 mg/l
3 %
Single value · Bertoldshofen
Sulphate 6,1 mg/l 250 mg/l
2 %
Single value · Bertoldshofen

Further parameters (6)

Further parameters – Bertoldshofen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 2,347 mmol/l Single value · Bertoldshofen
Hardness range (WRMG) 3 (hart) Single value · Bertoldshofen
Magnesium 1,193 mmol/l Single value · Bertoldshofen
Oxygen 8,7 mg/l Single value · Bertoldshofen
Potassium 0,018 mmol/l Single value · Bertoldshofen
Total hardness 3,544 mmol/l Single value · Bertoldshofen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 4 more supply zones in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
18.4 °dH
Hardness range 3 (hart)
Key values Eschenau
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4,1 mg/l 50 mg/l
8 %
Single value · Eschenau
Sulphate 3,1 mg/l 250 mg/l
1 %
Single value · Eschenau
Sodium 5,7 mg/l 200 mg/l
3 %
Single value · Eschenau
Show all recorded parameters (11 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Eschenau
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4,1 mg/l 50 mg/l
8 %
Single value · Eschenau

Indicator parameters (4)

Indicator parameters – Eschenau
Parameter Value Parametric value Share of the parametric value Reference
Chloride 9,2 mg/l 250 mg/l
4 %
Single value · Eschenau
pH 7,27 6,5–9,5 Single value · Eschenau
Sodium 5,7 mg/l 200 mg/l
3 %
Single value · Eschenau
Sulphate 3,1 mg/l 250 mg/l
1 %
Single value · Eschenau

Further parameters (6)

Further parameters – Eschenau
Parameter Value Parametric value Share of the parametric value Reference
Calcium 2,350 mmol/l Single value · Eschenau
Hardness range (WRMG) 3 (hart) Single value · Eschenau
Magnesium 0,917 mmol/l Single value · Eschenau
Oxygen 8,3 mg/l Single value · Eschenau
Potassium 0,026 mmol/l Single value · Eschenau
Total hardness 3,276 mmol/l Single value · Eschenau

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
17.8 °dH
Hardness range 3 (hart)
Key values Kirchthal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4,8 mg/l 50 mg/l
10 %
Single value · Kirchthal
Sulphate 4,0 mg/l 250 mg/l
2 %
Single value · Kirchthal
Sodium 6,2 mg/l 200 mg/l
3 %
Single value · Kirchthal
Show all recorded parameters (11 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Kirchthal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4,8 mg/l 50 mg/l
10 %
Single value · Kirchthal

Indicator parameters (4)

Indicator parameters – Kirchthal
Parameter Value Parametric value Share of the parametric value Reference
Chloride 8,1 mg/l 250 mg/l
3 %
Single value · Kirchthal
pH 7,24 6,5–9,5 Single value · Kirchthal
Sodium 6,2 mg/l 200 mg/l
3 %
Single value · Kirchthal
Sulphate 4,0 mg/l 250 mg/l
2 %
Single value · Kirchthal

Further parameters (6)

Further parameters – Kirchthal
Parameter Value Parametric value Share of the parametric value Reference
Calcium 2,163 mmol/l Single value · Kirchthal
Hardness range (WRMG) 3 (hart) Single value · Kirchthal
Magnesium 1,000 mmol/l Single value · Kirchthal
Oxygen 4,8 mg/l Single value · Kirchthal
Potassium 0,038 mmol/l Single value · Kirchthal
Total hardness 3,168 mmol/l Single value · Kirchthal

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
20.2 °dH
Hardness range 3 (hart)
Key values Sulzschneid
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5,7 mg/l 50 mg/l
11 %
Single value · Sulzschneid
Sulphate 3,2 mg/l 250 mg/l
1 %
Single value · Sulzschneid
Sodium 7,5 mg/l 200 mg/l
4 %
Single value · Sulzschneid
Show all recorded parameters (11 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Sulzschneid
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5,7 mg/l 50 mg/l
11 %
Single value · Sulzschneid

Indicator parameters (4)

Indicator parameters – Sulzschneid
Parameter Value Parametric value Share of the parametric value Reference
Chloride 9,7 mg/l 250 mg/l
4 %
Single value · Sulzschneid
pH 7,16 6,5–9,5 Single value · Sulzschneid
Sodium 7,5 mg/l 200 mg/l
4 %
Single value · Sulzschneid
Sulphate 3,2 mg/l 250 mg/l
1 %
Single value · Sulzschneid

Further parameters (6)

Further parameters – Sulzschneid
Parameter Value Parametric value Share of the parametric value Reference
Calcium 2,425 mmol/l Single value · Sulzschneid
Hardness range (WRMG) 3 (hart) Single value · Sulzschneid
Magnesium 1,156 mmol/l Single value · Sulzschneid
Oxygen 7,2 mg/l Single value · Sulzschneid
Potassium 0,046 mmol/l Single value · Sulzschneid
Total hardness 3,598 mmol/l Single value · Sulzschneid

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – marktoberdorf gesamt
Parameter Value Parametric value Share of the parametric value Reference
Ammonium unterhalb Bestimmungsgrenze an allen Messstellen mg/l
not detectable
0.5 mg/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 87616

How hard is the water in Postcode 87616?
Wasserwerk Marktoberdorf (Stadt Marktoberdorf) publishes a total hardness of 3,544 mmol/l for the supply zone Bertoldshofen — that corresponds to 19.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 08/07/2026.
How much nitrate is in the drinking water in Postcode 87616?
Wasserwerk Marktoberdorf (Stadt Marktoberdorf) publishes a nitrate value of 9,9 mg/l for the supply zone Bertoldshofen. The statutory parametric value is 50 mg/l; the measured value represents 20 % of the parametric value. Basis: Publication by the water supplier, retrieved on 08/07/2026.
Who supplies the drinking water in Postcode 87616?
Wasserwerk Marktoberdorf (Stadt Marktoberdorf). The values shown here come from the supply zone Bertoldshofen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.