Drinking water in 86956
One supply zone, water supplier: Stadtwerke Schongau.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Hochbehälter Schwabsoien: Brunnen II Schwabsoien (Gewinnungsanlage Schwabsoien)
Stadtwerke SchongauAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 23/07/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
Water hardness
20.3 °dH
Hardness range hard
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 12.6 mg/l | 50 mg/l | 25 % | Single value |
| Lead | <0.0005 mg/l below limit of quantification | 10 µg/l | < 5 % * | Single value |
| Escherichia coli (E. coli) | 0 MPN/100ml | 0/100 ml | — | Single value |
| Sulphate | 6.1 mg/l | 250 mg/l | 2 % | Single value |
| Sodium | 5.3 mg/l | 200 mg/l | 3 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (70 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 MPN/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 MPN/100ml | 0/100 ml | — | Single value |
Chemical parameters (44)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0.3 µg/l below limit of quantification | 3 µg/l | < 10 % * | Single value |
| 2,4-D | <0.02 µg/l below limit of quantification | — | — | Single value |
| Antimony | <0.001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | <0.0005 mg/l below limit of quantification | 10 µg/l | < 5 % * | Single value |
| Atrazine | <0.02 µg/l below limit of quantification | — | — | Single value |
| Bentazone | <0.02 µg/l below limit of quantification | — | — | Single value |
| Benzene | <0.25 µg/l below limit of quantification | 1 µg/l | < 25 % * | Single value |
| Benzo(a)pyrene | <0.0025 µg/l below limit of quantification | 10 ng/l | < 25 % * | Single value |
| Benzo(b)fluoranthene | <0.010 µg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0.020 µg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0.010 µg/l below limit of quantification | — | — | Single value |
| Bisphenol A | <0.01 µg/l below limit of quantification | 2.5 µg/l | < 0.4 % * | Single value |
| Boron | <0.01 mg/l below limit of quantification | 1 mg/l | < 1 % * | Single value |
| Bromate | - mg/l not determined | 10 µg/l | — | Single value |
| Bromodichloromethane | <0.1 µg/l below limit of quantification | — | — | Single value |
| Cadmium | <0.0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Chromium | <0.0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | <0.001 mg/l below limit of quantification | 2 mg/l | < < 0.1 % * | Single value |
| Cyanide | <0.002 mg/l below limit of quantification | 50 µg/l | < 4 % * | Single value |
| Desethylatrazine | <0.02 µg/l below limit of quantification | — | — | Single value |
| Desethylterbuthylazine | <0.02 µg/l below limit of quantification | — | — | Single value |
| Dibromochloromethane | <0.1 µg/l below limit of quantification | — | — | Single value |
| Dicamba | <0.02 µg/l below limit of quantification | — | — | Single value |
| Indeno(1,2,3-cd)pyrene | <0.010 µg/l below limit of quantification | — | — | Single value |
| Isoproturon | <0.02 µg/l below limit of quantification | — | — | Single value |
| Lead | <0.0005 mg/l below limit of quantification | 10 µg/l | < 5 % * | Single value |
| MCPA | <0.02 µg/l below limit of quantification | — | — | Single value |
| Mercury | <0.0002 mg/l below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Metolachlor | <0.02 µg/l below limit of quantification | — | — | Single value |
| Nickel | 0.002 mg/l | 20 µg/l | 10 % | Single value |
| Nitrate | 12.6 mg/l | 50 mg/l | 25 % | Single value |
| Nitrite | <0.01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Polycyclic aromatic hydrocarbons | n.n. µg/l not detectable | 0.1 µg/l | — | Single value |
| Selenium | <0.001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Simazine | <0.02 µg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0.02 µg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | <0.1 µg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene and Trichloroethene (sum) | n.n. µg/l not detectable | 10 µg/l | — | Single value |
| Tribromomethane (bromoform) | <0.1 µg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <0.1 µg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | <0.1 µg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | n.n. µg/l not detectable | 50 µg/l | — | Single value |
| Uranium | 0.0007 mg/l | 10 µg/l | 7 % | Single value |
| Vinyl chloride | <0.25 µg/l below limit of quantification | 0.5 µg/l | < 50 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (15)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0.005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | <0.01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Calcite dissolution capacity | -24 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 10.2 mg/l | 250 mg/l | 4 % | Single value |
| Coliform bacteria | 0 MPN/100ml | 0/100 ml | — | Single value |
| Colour | farblos Unit not stated in the document | 0.5 m⁻¹ | — | Single value |
| Iron | <0.01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Manganese | <0.0025 mg/l below limit of quantification | 50 µg/l | < 5 % * | Single value |
| Odour | o.B. | für den Verbraucher annehmbar | — | Single value |
| Sodium | 5.3 mg/l | 200 mg/l | 3 % | Single value |
| Sulphate | 6.1 mg/l | 250 mg/l | 2 % | Single value |
| Taste | - not determined | für den Verbraucher annehmbar | — | Single value |
| Temperature | 9.2 ˚C | — | — | Single value |
| Total organic carbon (TOC) | - mg/l not determined | ohne anormale Veränderung | — | Single value |
| Turbidity | 0.07 NTU | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 97.7 mg/l | — | — | Single value |
| Carbonate hardness | 19.4 ˚dH | — | — | Single value |
| Dissolved organic carbon (DOC) | 0.73 mg/l | — | — | Single value |
| Free carbon dioxide | 36.2 mg/l | — | — | Single value |
| Magnesium | 28.6 mg/l | — | — | Single value |
| Potassium | 0.9 mg/l | — | — | Single value |
| Saturation index | +0,20 | — | — | Single value |
| Sum of alkaline earth metals | 3.60 mmol/l | — | — | Single value |
| Total hardness | 20.3 ˚dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.schongau.de/ceasy/resource/?id=6262&download=1 · 24. 8. 2024 · 23.07.2024 · retrieved on 27/07/2026
Frequent questions about postcode 86956
- How hard is the water in Postcode 86956?
- Stadtwerke Schongau publishes a total hardness of 20.3 °dH for the supply zone Hochbehälter Schwabsoien: Brunnen II Schwabsoien (Gewinnungsanlage Schwabsoien) (hardness range hard). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 24. 8. 2024, retrieved on 27/07/2026.
- How much nitrate is in the drinking water in Postcode 86956?
- Stadtwerke Schongau publishes a nitrate value of 12.6 mg/l for the supply zone Hochbehälter Schwabsoien: Brunnen II Schwabsoien (Gewinnungsanlage Schwabsoien). The statutory parametric value is 50 mg/l; the measured value represents 25 % of the parametric value. Basis: 24. 8. 2024, retrieved on 27/07/2026.
- Who supplies the drinking water in Postcode 86956?
- Stadtwerke Schongau. The values shown here come from the supply zone Hochbehälter Schwabsoien: Brunnen II Schwabsoien (Gewinnungsanlage Schwabsoien) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.