Skip to content
maunawai.info

Drinking water in 84189

For this postcode Zweckverband Binatal-Gruppe publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Wurmsham, Gemeindeteil Pauluszell und Umland

Zweckverband Binatal-Gruppe

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 19/07/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values Wurmsham, Gemeindeteil Pauluszell und Umland
Parameter Value Parametric value Share of the parametric value Reference
Nitrate <1,0 mg/l
below limit of quantification
50 mg/l
< 2 % *
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Sulphate 6,7 mg/l 250 mg/l
3 %
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Sodium 6,3 mg/l 200 mg/l
3 %
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (13 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Wurmsham, Gemeindeteil Pauluszell und Umland
Parameter Value Parametric value Share of the parametric value Reference
Nitrate <1,0 mg/l
below limit of quantification
50 mg/l
< 2 % *
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Nitrite mg/l
not determined
0.5 mg/l Single value · Wurmsham, Gemeindeteil Pauluszell und Umland

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – Wurmsham, Gemeindeteil Pauluszell und Umland
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Chloride 1,7 mg/l 250 mg/l
0.7 %
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Iron <0,005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
pH 7,68 6,5–9,5 Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Sodium 6,3 mg/l 200 mg/l
3 %
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Sulphate 6,7 mg/l 250 mg/l
3 %
Single value · Wurmsham, Gemeindeteil Pauluszell und Umland

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Wurmsham, Gemeindeteil Pauluszell und Umland
Parameter Value Parametric value Share of the parametric value Reference
Calcium 69,9 mg/l Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Magnesium 32,7 mg/l Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Oxygen 10,4 mg/l Single value · Wurmsham, Gemeindeteil Pauluszell und Umland
Potassium 1,1 mg/l Single value · Wurmsham, Gemeindeteil Pauluszell und Umland

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wurmsham.de/wasserqualitaet.html · 19.07.2022 · retrieved on 08/08/2026
Show 1 more supply zone in this postcode

Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland

Zweckverband Binatal-Gruppe

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 19/07/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,0 mg/l 50 mg/l
2 %
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Sulphate 26,8 mg/l 250 mg/l
11 %
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Sodium 4,4 mg/l 200 mg/l
2 %
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Show all recorded parameters (13 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,0 mg/l 50 mg/l
2 %
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,006 mg/l 0.2 mg/l
3 %
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Chloride 12,7 mg/l 250 mg/l
5 %
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Iron 0,009 mg/l 0.2 mg/l
5 %
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Manganese <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
pH 7,54 6,5–9,5 Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Sodium 4,4 mg/l 200 mg/l
2 %
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Sulphate 26,8 mg/l 250 mg/l
11 %
Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Parameter Value Parametric value Share of the parametric value Reference
Calcium 82,0 mg/l Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Magnesium 27,1 mg/l Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Oxygen 7,4 mg/l Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland
Potassium 1,0 mg/l Single value · Zweckverband Binatal-Gruppe, Gemeindeteil Wurmsham/Seifriedswörth sowie Eberspoint und Umland

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wurmsham.de/wasserqualitaet.html · 19.07.2022 · retrieved on 08/08/2026

Frequent questions about postcode 84189

How much nitrate is in the drinking water in Postcode 84189?
Zweckverband Binatal-Gruppe publishes a nitrate value of <1,0 mg/l for the supply zone Wurmsham, Gemeindeteil Pauluszell und Umland. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: 19.07.2022, retrieved on 08/08/2026.
Who supplies the drinking water in Postcode 84189?
Zweckverband Binatal-Gruppe. The values shown here come from the supply zone Wurmsham, Gemeindeteil Pauluszell und Umland and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.