Drinking water in 83547
One supply zone, water supplier: Gemeinde Babensham.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Gemeinde Babensham, Brunnen 2
Gemeinde BabenshamAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 20/08/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
Water hardness
18.1 °dH
Hardness range hart
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 12 mg/l | 50 mg/l | 24 % | Single value |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Sulphate | 18 mg/l | 250 mg/l | 7 % | Single value |
| Sodium | 3,5 mg/l | 200 mg/l | 2 % | Single value |
Show all recorded parameters (51 — most recent value per parameter)
Microbiology (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
Chemical parameters (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Atrazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Bentazone | <0,000015 (NWG) mg/l not detectable | — | — | Single value |
| Desethylatrazine | <0,00001 mg/l below limit of quantification | — | — | Single value |
| Desethylterbuthylazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Desisopropylatrazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Dicamba | <0,00003 mg/l below limit of quantification | — | — | Single value |
| Dichlorprop | <0,000010 (NWG) mg/l not detectable | — | — | Single value |
| Diuron | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Ethidimuron | <0,00003 mg/l below limit of quantification | — | — | Single value |
| Fluroxypyr | <0,00003 mg/l below limit of quantification | — | — | Single value |
| Glyphosate | <0,000010 (NWG) mg/l not detectable | — | — | Single value |
| Isoproturon | <0,00002 mg/l below limit of quantification | — | — | Single value |
| MCPA | <0,00003 mg/l below limit of quantification | — | — | Single value |
| Metazachlor | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Nitrate | 12 mg/l | 50 mg/l | 24 % | Single value |
| Pesticides — Total | 0 mg/l | 0.5 µg/l | 0 % | Single value |
| Propazine | <0,00003 mg/l below limit of quantification | — | — | Single value |
| Simazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0,00002 mg/l below limit of quantification | — | — | Single value |
Indicator parameters (14)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcite dissolution capacity | -22 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 3,1 mg/l | 250 mg/l | 1 % | Single value |
| Coliform bacteria | 0 KBE/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colour | farblos Unit not stated in the document | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 580 µS/cm | 2,790 µS/cm | — | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| pH | 7,49 | 6,5–9,5 | — | Single value |
| Sodium | 3,5 mg/l | 200 mg/l | 2 % | Single value |
| Sulphate | 18 mg/l | 250 mg/l | 7 % | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Temperature | 16,1 °C | — | — | Single value |
| Turbidity | klar Unit not stated in the document | 1 NTU | — | Single value |
Further parameters (17)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 5,93 mmol/l | — | — | Single value |
| Base capacity to pH 8.2 | 0,38 mmol/l | — | — | Single value |
| Calcite-dissolving carbon dioxide | 0,0 mg/l | — | — | Single value |
| Calcium | 80,8 mg/l | — | — | Single value |
| Carbonate hardness | 16,5 °dH | — | — | Single value |
| Copper quotient | 31,29 | — | — | Single value |
| Dissolved organic carbon (DOC) | <0,5 mg/l below limit of quantification | — | — | Single value |
| Equilibrium carbon dioxide | 19 mg/l | — | — | Single value |
| Free carbon dioxide | 19 mg/l | — | — | Single value |
| Hardness range (WRMG) | hart | — | — | Single value |
| Magnesium | 29,6 mg/l | — | — | Single value |
| Oxygen | 7,5 mg/l | — | — | Single value |
| Phosphate | <0,05 mg/l below limit of quantification | — | — | Single value |
| Pitting corrosion quotient S1 | 0,11 | — | — | Single value |
| Potassium | 1,0 mg/l | — | — | Single value |
| Total hardness | 3,23 mmol/l | — | — | Single value |
| Trickling quotient | 2,41 | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.babensham.de/fileadmin/Gemeinde/Wasserversorung/Trinkwasseruntersuchtung_Brunnen_2.pdf · 20.08.2024 · Probenahme 13.08.2024 14:11, Beginn der Prüfungen 14.08.2024, Ende der Prüfungen 20.08.2024 · retrieved on 08/08/2026
Frequent questions about postcode 83547
- How hard is the water in Postcode 83547?
- Gemeinde Babensham publishes a total hardness of 3,23 mmol/l for the supply zone Gemeinde Babensham, Brunnen 2 — that corresponds to 18.1 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 20.08.2024, retrieved on 08/08/2026.
- How much nitrate is in the drinking water in Postcode 83547?
- Gemeinde Babensham publishes a nitrate value of 12 mg/l for the supply zone Gemeinde Babensham, Brunnen 2. The statutory parametric value is 50 mg/l; the measured value represents 24 % of the parametric value. Basis: 20.08.2024, retrieved on 08/08/2026.
- Who supplies the drinking water in Postcode 83547?
- Gemeinde Babensham. The values shown here come from the supply zone Gemeinde Babensham, Brunnen 2 and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.