Skip to content
maunawai.info

Drinking water in 72475

For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 6 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

WW Hermentingen / Hermentingen / Reinwasser

Zweckverband Wasserversorgung Zollernalb

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
17.3 °dH
Hardness range hart
Key values WW Hermentingen / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15 mg/l 50 mg/l
30 %
Single value
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Sulphate 7,7 mg/l 250 mg/l
3 %
Single value
Sodium 7,9 mg/l 200 mg/l
4 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (79 — most recent value per parameter)

Chemical parameters (44)

Chemical parameters – WW Hermentingen / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0005 mg/l
below limit of quantification
3 µg/l
< 17 % *
Single value
Antimony <0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Atrazine <0,000025 mg/l
below limit of quantification
Single value
Benzene <0,00025 mg/l
below limit of quantification
1 µg/l
< 25 % *
Single value
Benzo(a)pyrene <0,000001 mg/l
below limit of quantification
10 ng/l
< 10 % *
Single value
Benzo(b)fluoranthene <0,000001 mg/l
below limit of quantification
Single value
Benzo(ghi)perylene <0,000001 mg/l
below limit of quantification
Single value
Benzo(k)fluoranthene <0,000001 mg/l
below limit of quantification
Single value
Bisphenol A <0,00001 mg/l
below limit of quantification
2.5 µg/l
< 0.4 % *
Single value
Boron <0,02 mg/l
below limit of quantification
1 mg/l
< 2 % *
Single value
Bromate <0,0025 mg/l
below limit of quantification
10 µg/l
< 25 % *
Single value
Bromodichloromethane <0,0005 mg/l
below limit of quantification
Single value
Cadmium <0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Chlorate <0,02 mg/l
below limit of quantification
70 µg/l
< 29 % *
Single value
Chlorite <0,05 mg/l
below limit of quantification
0.2 mg/l
< 25 % *
Single value
Chromium 0,0007 mg/l 25 µg/l
3 %
Single value
Copper 0,009 mg/l 2 mg/l
0.4 %
Single value
Cyanide <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Dibromoacetic acid <2,0 µg/l
below limit of quantification
Single value
Dibromochloromethane <0,0005 mg/l
below limit of quantification
Single value
Dichloroacetic acid <2,0 µg/l
below limit of quantification
Single value
Fluoride <0,05 mg/l
below limit of quantification
1.5 mg/l
< 3 % *
Single value
Indeno(1,2,3-cd)pyrene <0,000001 mg/l
below limit of quantification
Single value
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Mercury <0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Metazachlor <0,000025 mg/l
below limit of quantification
Single value
Metolachlor <0,000025 mg/l
below limit of quantification
Single value
Monobromoacetic acid <2,0 µg/l
below limit of quantification
Single value
Monochloroacetic acid <2,0 µg/l
below limit of quantification
Single value
Nickel 0,001 mg/l 20 µg/l
5 %
Single value
Nitrate 15 mg/l 50 mg/l
30 %
Single value
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides — Total n. b. mg/l
not determined
0.5 µg/l Single value
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Simazine <0,000025 mg/l
below limit of quantification
Single value
Terbuthylazine <0,000025 mg/l
below limit of quantification
Single value
Tetrachloroethene <0,0005 mg/l
below limit of quantification
Single value
Tribromomethane (bromoform) <0,0005 mg/l
below limit of quantification
Single value
Trichloroacetic acid <2,0 µg/l
below limit of quantification
Single value
Trichloroethene <0,0005 mg/l
below limit of quantification
Single value
Trichloromethane (chloroform) <0,0005 mg/l
below limit of quantification
Single value
Trihalomethanes — Total n. b. mg/l
not determined
50 µg/l Single value
Uranium 0,0002 mg/l 10 µg/l
2 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (14)

PFAS – WW Hermentingen / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
Perfluorobutane sulfonic acid (PFBS) <0,0010 µg/l
below limit of quantification
Single value
Perfluorobutanoic acid (PFBA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorodecane sulfonic acid (PFDS) <0,0010 µg/l
below limit of quantification
Single value
Perfluoroheptane sulfonic acid (PFHpS) <0,0010 µg/l
below limit of quantification
Single value
Perfluoroheptanoic acid (PFHpA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorohexane sulfonic acid (PFHxS) <0,0010 µg/l
below limit of quantification
Single value
Perfluorohexanoic acid (PFHxA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorononane sulfonic acid (PFNS) <0,0010 µg/l
below limit of quantification
Single value
Perfluorononanoic acid (PFNA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorooctanesulfonic acid (PFOS) <0,0010 µg/l
below limit of quantification
Single value
Perfluorooctanoic acid (PFOA) <0,0010 µg/l
below limit of quantification
Single value
Perfluoropentanesulfonic acid (PFPeS) <0,0010 µg/l
below limit of quantification
Single value
Perfluoropentanoic acid (PFPeA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorotridecanesulfonic acid (PFTrDS) <0,0010 µg/l
below limit of quantification
Single value

Indicator parameters (10)

Indicator parameters – WW Hermentingen / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,005 mg/l 0.2 mg/l
3 %
Single value
Ammonium 0,01 mg/l 0.5 mg/l
2 %
Single value
Calcite dissolution capacity -25 mg/l 5 mg/l CaCO3 Single value
Chloride 20 mg/l 250 mg/l
8 %
Single value
Iron <0,005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Manganese <0,001 mg/l
below limit of quantification
50 µg/l
< 2 % *
Single value
Sodium 7,9 mg/l 200 mg/l
4 %
Single value
Sulphate 7,7 mg/l 250 mg/l
3 %
Single value
Temperature 10,1 °C Single value
Total organic carbon (TOC) 0,6 mg/l ohne anormale Veränderung Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (11)

Further parameters – WW Hermentingen / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 6,4 mmol/l Single value
Calcium 110 mg/l Single value
Carbonate hardness 3,08 mmol/l Single value
Hardness range (WRMG) hart Single value
Hydrogen carbonate 387 mg/l Single value
Magnesium 8,2 mg/l Single value
Oxygen 12,0 mg/l Single value
Phosphate 0,04 mg/l Single value
Potassium 0,6 mg/l Single value
Saturation index 0,22 Single value
Total hardness 3,08 mmol/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke.balingen.de/de/Energie-Wasser/Wasser-und-Abwasser/Wasser-und-Abwasser/Trinkwasseranalyse-Zweckverband-Zollernalb.pdf · 24.03.2026 · Probenahme 04.03.2026 13:13, Prüfzeitraum 04.03.2026 - 24.03.2026 · retrieved on 25/07/2026
Show 6 more supply zones in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
17.3 °dH
Hardness range hart
Key values HB / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15 mg/l 50 mg/l
30 %
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Sulphate 7,7 mg/l 250 mg/l
3 %
Single value
Sodium 7,9 mg/l 200 mg/l
4 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (79 — most recent value per parameter)

Chemical parameters (44)

Chemical parameters – HB / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,0005 mg/l
below limit of quantification
3 µg/l
< 17 % *
Single value
Antimony < 0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Atrazine < 0,000025 mg/l
below limit of quantification
Single value
Benzene < 0,00025 mg/l
below limit of quantification
1 µg/l
< 25 % *
Single value
Benzo(a)pyrene < 0,000001 mg/l
below limit of quantification
10 ng/l
< 10 % *
Single value
Benzo(b)fluoranthene < 0,000001 mg/l
below limit of quantification
Single value
Benzo(ghi)perylene < 0,000001 mg/l
below limit of quantification
Single value
Benzo(k)fluoranthene < 0,000001 mg/l
below limit of quantification
Single value
Bisphenol A < 0,00001 mg/l
below limit of quantification
2.5 µg/l
< 0.4 % *
Single value
Boron < 0,02 mg/l
below limit of quantification
1 mg/l
< 2 % *
Single value
Bromate < 0,0025 mg/l
below limit of quantification
10 µg/l
< 25 % *
Single value
Bromodichloromethane < 0,0005 mg/l
below limit of quantification
Single value
Cadmium < 0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Chlorate < 0,02 mg/l
below limit of quantification
70 µg/l
< 29 % *
Single value
Chlorite < 0,05 mg/l
below limit of quantification
0.2 mg/l
< 25 % *
Single value
Chromium 0,0007 mg/l 25 µg/l
3 %
Single value
Copper 0,009 mg/l 2 mg/l
0.4 %
Single value
Cyanide < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Dibromoacetic acid < 2,0 µg/l
below limit of quantification
Single value
Dibromochloromethane < 0,0005 mg/l
below limit of quantification
Single value
Dichloroacetic acid < 2,0 µg/l
below limit of quantification
Single value
Fluoride < 0,05 mg/l
below limit of quantification
1.5 mg/l
< 3 % *
Single value
Indeno(1,2,3-cd)pyrene < 0,000001 mg/l
below limit of quantification
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Metazachlor < 0,000025 mg/l
below limit of quantification
Single value
Metolachlor < 0,000025 mg/l
below limit of quantification
Single value
Monobromoacetic acid < 2,0 µg/l
below limit of quantification
Single value
Monochloroacetic acid < 2,0 µg/l
below limit of quantification
Single value
Nickel 0,001 mg/l 20 µg/l
5 %
Single value
Nitrate 15 mg/l 50 mg/l
30 %
Single value
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides — Total (n. b.) mg/l
not determined
0.5 µg/l Single value
Selenium < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Simazine < 0,000025 mg/l
below limit of quantification
Single value
Terbuthylazine < 0,000025 mg/l
below limit of quantification
Single value
Tetrachloroethene < 0,0005 mg/l
below limit of quantification
Single value
Tribromomethane (bromoform) < 0,0005 mg/l
below limit of quantification
Single value
Trichloroacetic acid < 2,0 µg/l
below limit of quantification
Single value
Trichloroethene < 0,0005 mg/l
below limit of quantification
Single value
Trichloromethane (chloroform) < 0,0005 mg/l
below limit of quantification
Single value
Trihalomethanes — Total (n. b.) mg/l
not determined
50 µg/l Single value
Uranium 0,0002 mg/l 10 µg/l
2 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (14)

PFAS – HB / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
Perfluorobutane sulfonic acid (PFBS) < 0,0010 µg/l
below limit of quantification
Single value
Perfluorobutanoic acid (PFBA) < 0,0010 µg/l
below limit of quantification
Single value
Perfluorodecane sulfonic acid (PFDS) < 0,0010 µg/l
below limit of quantification
Single value
Perfluoroheptane sulfonic acid (PFHpS) < 0,0010 µg/l
below limit of quantification
Single value
Perfluoroheptanoic acid (PFHpA) < 0,0010 µg/l
below limit of quantification
Single value
Perfluorohexane sulfonic acid (PFHxS) < 0,0010 µg/l
below limit of quantification
Single value
Perfluorohexanoic acid (PFHxA) < 0,0010 µg/l
below limit of quantification
Single value
Perfluorononane sulfonic acid (PFNS) < 0,0010 µg/l
below limit of quantification
Single value
Perfluorononanoic acid (PFNA) < 0,0010 µg/l
below limit of quantification
Single value
Perfluorooctanesulfonic acid (PFOS) < 0,0010 µg/l
below limit of quantification
Single value
Perfluorooctanoic acid (PFOA) < 0,0010 µg/l
below limit of quantification
Single value
Perfluoropentanesulfonic acid (PFPeS) < 0,0010 µg/l
below limit of quantification
Single value
Perfluoropentanoic acid (PFPeA) < 0,0010 µg/l
below limit of quantification
Single value
Perfluorotridecanesulfonic acid (PFTrDS) < 0,0010 µg/l
below limit of quantification
Single value

Indicator parameters (10)

Indicator parameters – HB / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,005 mg/l 0.2 mg/l
3 %
Single value
Ammonium 0,01 mg/l 0.5 mg/l
2 %
Single value
Calcite dissolution capacity -25 mg/l 5 mg/l CaCO3 Single value
Chloride 20 mg/l 250 mg/l
8 %
Single value
Iron < 0,005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Manganese < 0,001 mg/l
below limit of quantification
50 µg/l
< 2 % *
Single value
Sodium 7,9 mg/l 200 mg/l
4 %
Single value
Sulphate 7,7 mg/l 250 mg/l
3 %
Single value
Temperature 10,1 °C Single value
Total organic carbon (TOC) 0,6 mg/l ohne anormale Veränderung Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (11)

Further parameters – HB / Hermentingen / Reinwasser
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 6,4 mmol/l Single value
Calcium 110 mg/l Single value
Carbonate hardness 3,08 mmol/l Single value
Hardness range (WRMG) hart Single value
Hydrogen carbonate 387 mg/l Single value
Magnesium 8,2 mg/l Single value
Oxygen 12,0 mg/l Single value
Phosphate < 0,6 mg/l
below limit of quantification
Single value
Potassium 0,6 mg/l Single value
Saturation index 0,22 Single value
Total hardness 3,08 mmol/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (2)

Indicator parameters – Indikatorparameter
Parameter Value Parametric value Share of the parametric value Reference
Conductivity (25 °C) 612 μS/cm 2,790 µS/cm Single value · Indikatorparameter
pH 7,40 6,5–9,5 Single value · Indikatorparameter

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (2)

Indicator parameters – Indikatorparameter
Parameter Value Parametric value Share of the parametric value Reference
Conductivity (25 °C) 612 µS/cm 2,790 µS/cm Single value · Indikatorparameter
pH 7,40 6,5–9,5 Single value · Indikatorparameter

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke.balingen.de/de/Energie-Wasser/Wasser-und-Abwasser/Wasser-und-Abwasser/Trinkwasseranalyse-Zweckverband-Zollernalb.pdf · 24.03.2026 · Probenahme 04.03.2026 13:13, Prüfzeitraum 04.03.2026 - 24.03.2026 · retrieved on 25/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (2)

Indicator parameters – Vor-Ort-Parameter
Parameter Value Parametric value Share of the parametric value Reference
Conductivity (25 °C) 612 μS/cm 2,790 µS/cm Single value · Vor-Ort-Parameter
pH 7,3 6,5–9,5 Single value · Vor-Ort-Parameter

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Indicator parameters (2)

Indicator parameters – Vor-Ort-Parameter
Parameter Value Parametric value Share of the parametric value Reference
Conductivity (25 °C) 612 µS/cm 2,790 µS/cm Single value · Vor-Ort-Parameter
pH 7,3 6,5–9,5 Single value · Vor-Ort-Parameter

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke.balingen.de/de/Energie-Wasser/Wasser-und-Abwasser/Wasser-und-Abwasser/Trinkwasseranalyse-Zweckverband-Zollernalb.pdf · 24.03.2026 · Probenahme 04.03.2026 13:13, Prüfzeitraum 04.03.2026 - 24.03.2026 · retrieved on 25/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Anionen
Parameter Value Parametric value Share of the parametric value Reference
Phosphate 0,04 mg/l Single value · Anionen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 72475

How hard is the water in Postcode 72475?
Zweckverband Wasserversorgung Zollernalb publishes a total hardness of 3,08 mmol/l for the supply zone WW Hermentingen / Hermentingen / Reinwasser — that corresponds to 17.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 24.03.2026, retrieved on 25/07/2026.
How much nitrate is in the drinking water in Postcode 72475?
Zweckverband Wasserversorgung Zollernalb publishes a nitrate value of 15 mg/l for the supply zone WW Hermentingen / Hermentingen / Reinwasser. The statutory parametric value is 50 mg/l; the measured value represents 30 % of the parametric value. Basis: 24.03.2026, retrieved on 25/07/2026.
Who supplies the drinking water in Postcode 72475?
Zweckverband Wasserversorgung Zollernalb. The values shown here come from the supply zone WW Hermentingen / Hermentingen / Reinwasser and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.