Drinking water in 64711
For this postcode Wasserversorgung Erbach AöR publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Versorgungsgebiet Erbach (mit Ortsteilen Lauerbach, Erlenbach und Roßbach)
Wasserversorgung Erbach AöRAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
Water hardness
5 °dH
Hardness range weich (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 14,2 mg/L | 50 mg/l | 28 % | Maximum |
| Lead | <0,001 mg/L below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 Anzahl/100 ml | 0/100 ml | — | Single value |
| Sulphate | 12,7 mg/L | 250 mg/l | 5 % | Maximum |
| Sodium | 3,9 mg/L | 200 mg/l | 2 % | Maximum |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (56 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 Anzahl/100 ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 Anzahl/100 ml | 0/100 ml | — | Single value |
Chemical parameters (24)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | < 0,002 mg/L below limit of quantification | 3 µg/l | < 67 % * | Single value |
| Antimony | < 0,0001 mg/L below limit of quantification | 5 µg/l | < 2 % * | Single value |
| Arsenic | < 0,002 mg/L below limit of quantification | 10 µg/l | < 20 % * | Single value |
| Benzene | <0,0002 mg/L below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Benzo(a)pyrene | < 0,000002 mg/L below limit of quantification | 10 ng/l | < 20 % * | Single value |
| Bisphenol A | <0,0001 mg/L below limit of quantification | 2.5 µg/l | < 4 % * | Single value |
| Boron | < 0,02 mg/L below limit of quantification | 1 mg/l | < 2 % * | Single value |
| Bromate | < 0,005 mg/L below limit of quantification | 10 µg/l | < 50 % * | Single value |
| Cadmium | < 0,001 mg/L below limit of quantification | 3 µg/l | < 33 % * | Single value |
| Chromium | < 0,005 mg/L below limit of quantification | 25 µg/l | < 20 % * | Single value |
| Copper | < 0,02 mg/L below limit of quantification | 2 mg/l | < 1 % * | Single value |
| Cyanide | < 0,005 mg/L below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Fluoride | <0,1 mg/L below limit of quantification | 1.5 mg/l | < 7 % * | Single value |
| Lead | <0,001 mg/L below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | < 0,0002 mg/L below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Nickel | < 0,003 mg/L below limit of quantification | 20 µg/l | < 15 % * | Single value |
| Nitrate | 14,2 mg/L | 50 mg/l | 28 % | Maximum |
| Nitrite | < 0,05 mg/L below limit of quantification | 0.5 mg/l | < 10 % * | Single value |
| Pesticides — Total | < Bestimmungsgrenzen mg/L below limit of quantification | 0.5 µg/l | — | Single value |
| Polycyclic aromatic hydrocarbons | < Bestimmungsgrenzen mg/L below limit of quantification | 0.1 µg/l | — | Single value |
| Selenium | < 0,001 mg/L below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Tetrachloroethene and Trichloroethene (sum) | < Bestimmungsgrenzen mg/L below limit of quantification | 10 µg/l | — | Single value |
| Trihalomethanes — Total | < 0,001 mg/L below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Uranium | <0,0001 mg/L below limit of quantification | 10 µg/l | < 1 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,05 mg/L below limit of quantification | 0.2 mg/l | < 25 % * | Single value |
| Ammonium | < 0,03 mg/L below limit of quantification | 0.5 mg/l | < 6 % * | Single value |
| Calcite dissolution capacity | 3 mg/L | 5 mg/l CaCO3 | — | Maximum |
| Chloride | 8,3 mg/L | 250 mg/l | 3 % | Maximum |
| Coliform bacteria | 0 Anzahl/100 ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 1 ml-1 | ohne anormale Veränderung | — | Maximum |
| Colony count 36 °C | 1 ml-1 | ohne anormale Veränderung | — | Maximum |
| Colour | < 0,2 m-1 below limit of quantification | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 202 µS/cm | 2,790 µS/cm | — | Maximum |
| Iron | <0,005 mg/L below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | < 0,02 mg/L below limit of quantification | 50 µg/l | < 40 % * | Single value |
| Odour | keine Auffälligkeiten - | für den Verbraucher annehmbar | — | Single value |
| pH | 8,1 pH-Einheiten | 6,5–9,5 | — | Maximum |
| Sodium | 3,9 mg/L | 200 mg/l | 2 % | Maximum |
| Sulphate | 12,7 mg/L | 250 mg/l | 5 % | Maximum |
| Taste | keine Auffälligkeiten - | für den Verbraucher annehmbar | — | Single value |
| Temperature | 20,0 °C | — | — | Maximum |
| Total organic carbon (TOC) | 1,3 mg/L | ohne anormale Veränderung | — | Maximum |
| Turbidity | <0,3 NTU below limit of quantification | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Treatment substances (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Free chlorine | <0,02 mg/L below limit of quantification | — | — | Single value |
Further parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 37,2 mg/L | — | — | Maximum |
| Carbonate hardness | 0,9 mmol/L | — | — | Maximum |
| Free carbon dioxide | 0,9 g/m³ | — | — | Maximum |
| Hardness range (WRMG) | weich (1) - | — | — | Single value |
| Magnesium | 3,2 mg/L | — | — | Maximum |
| Oxygen | 12,0 g/m³ | — | — | Maximum |
| Phosphate | <0,15 mg/L P below limit of quantification | — | — | Single value |
| Potassium | 4,1 mg/L | — | — | Maximum |
| Silicate / silicic acid | 13,9 g/m³ | — | — | Maximum |
| Total hardness | 0,9 mmol/L | — | — | Maximum |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: www.wasserversorgung-erbach.de · Januar 2026 · retrieved on 11/07/2026
Show 1 more supply zone in this postcode
Erbach-Bullau (mit Erbach-Eutergrund)
Wasserversorgung Erbach AöRAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
Water hardness
7.3 °dH
Hardness range weich (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 5,5 mg/L | 50 mg/l | 11 % | Maximum |
| Lead | < 0,001 mg/L below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 Anzahl/100 ml | 0/100 ml | — | Single value |
| Sulphate | 12,3 mg/L | 250 mg/l | 5 % | Maximum |
| Sodium | 6,4 mg/L | 200 mg/l | 3 % | Maximum |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (56 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 Anzahl/100 ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 Anzahl/100 ml | 0/100 ml | — | Single value |
Chemical parameters (24)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | < 0,002 mg/L below limit of quantification | 3 µg/l | < 67 % * | Single value |
| Antimony | < 0,0001 mg/L below limit of quantification | 5 µg/l | < 2 % * | Single value |
| Arsenic | < 0,005 mg/L below limit of quantification | 10 µg/l | < 50 % * | Single value |
| Benzene | <0,0002 mg/L below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Benzo(a)pyrene | < 0,000002 mg/L below limit of quantification | 10 ng/l | < 20 % * | Single value |
| Bisphenol A | <0,0001 mg/L below limit of quantification | 2.5 µg/l | < 4 % * | Single value |
| Boron | < 0,02 mg/L below limit of quantification | 1 mg/l | < 2 % * | Single value |
| Bromate | < 0,005 mg/L below limit of quantification | 10 µg/l | < 50 % * | Single value |
| Cadmium | < 0,001 mg/L below limit of quantification | 3 µg/l | < 33 % * | Single value |
| Chromium | < 0,005 mg/L below limit of quantification | 25 µg/l | < 20 % * | Single value |
| Copper | < 0,02 mg/L below limit of quantification | 2 mg/l | < 1 % * | Single value |
| Cyanide | < 0,005 mg/L below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Fluoride | <0,1 mg/L below limit of quantification | 1.5 mg/l | < 7 % * | Single value |
| Lead | < 0,001 mg/L below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | < 0,0002 mg/L below limit of quantification | 1 µg/l | < 20 % * | Single value |
| Nickel | <0,005 mg/L below limit of quantification | 20 µg/l | < 25 % * | Single value |
| Nitrate | 5,5 mg/L | 50 mg/l | 11 % | Maximum |
| Nitrite | < 0,05 mg/L below limit of quantification | 0.5 mg/l | < 10 % * | Single value |
| Pesticides — Total | < Bestimmungsgrenzen mg/L below limit of quantification | 0.5 µg/l | — | Single value |
| Polycyclic aromatic hydrocarbons | < Bestimmungsgrenzen mg/L below limit of quantification | 0.1 µg/l | — | Single value |
| Selenium | < 0,001 mg/L below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Tetrachloroethene and Trichloroethene (sum) | < Bestimmungsgrenzen mg/L below limit of quantification | 10 µg/l | — | Single value |
| Trihalomethanes — Total | < 0,001 mg/L below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Uranium | <0,0001 mg/L below limit of quantification | 10 µg/l | < 1 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,05 mg/L below limit of quantification | 0.2 mg/l | < 25 % * | Single value |
| Ammonium | < 0,03 mg/L below limit of quantification | 0.5 mg/l | < 6 % * | Single value |
| Calcite dissolution capacity | 5,4 mg/L | 5 mg/l CaCO3 | — | Maximum |
| Chloride | 3,9 mg/L | 250 mg/l | 2 % | Maximum |
| Coliform bacteria | 0 Anzahl/100 ml | 0/100 ml | — | Single value |
| Colony count 22 °C | >300 ml-1 above | ohne anormale Veränderung | — | Maximum |
| Colony count 36 °C | >300 ml-1 above | ohne anormale Veränderung | — | Maximum |
| Colour | < 0,2 m-1 below limit of quantification | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 263 µS/cm | 2,790 µS/cm | — | Maximum |
| Iron | < 0,07 mg/L below limit of quantification | 0.2 mg/l | < 35 % * | Single value |
| Manganese | < 0,02 mg/L below limit of quantification | 50 µg/l | < 40 % * | Single value |
| Odour | keine Auffälligkeiten - | für den Verbraucher annehmbar | — | Single value |
| pH | 8,2 pH-Einheiten | 6,5–9,5 | — | Maximum |
| Sodium | 6,4 mg/L | 200 mg/l | 3 % | Maximum |
| Sulphate | 12,3 mg/L | 250 mg/l | 5 % | Maximum |
| Taste | keine Auffälligkeiten - | für den Verbraucher annehmbar | — | Single value |
| Temperature | 17,1 °C | — | — | Maximum |
| Total organic carbon (TOC) | 0,9 mg/L | ohne anormale Veränderung | — | Maximum |
| Turbidity | <0,3 NTU below limit of quantification | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Treatment substances (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Free chlorine | <0,02 mg/L below limit of quantification | — | — | Single value |
Further parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 47,9 mg/L | — | — | Maximum |
| Carbonate hardness | 1,1 mmol/L | — | — | Maximum |
| Free carbon dioxide | 0,9 g/m³ | — | — | Maximum |
| Hardness range (WRMG) | weich (1) - | — | — | Single value |
| Magnesium | 1,5 mg/L | — | — | Maximum |
| Oxygen | 12,4 g/m³ | — | — | Maximum |
| Phosphate | < 0,15 mg/L P below limit of quantification | — | — | Single value |
| Potassium | 1,6 mg/L | — | — | Maximum |
| Silicate / silicic acid | 17,0 g/m³ | — | — | Maximum |
| Total hardness | 1,3 mmol/L | — | — | Maximum |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.wasserversorgung-erbach.de/fileadmin/downloads/wasseranalysen/2026/WVE_Erbach-Bullau_Analysendaten_Stand_Januar_2026.pdf · Januar 2026 · retrieved on 11/07/2026
Frequent questions about postcode 64711
- How hard is the water in Postcode 64711?
- Wasserversorgung Erbach AöR publishes a total hardness of 0,9 mmol/L for the supply zone Versorgungsgebiet Erbach (mit Ortsteilen Lauerbach, Erlenbach und Roßbach) — that corresponds to 5 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Januar 2026, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Postcode 64711?
- Wasserversorgung Erbach AöR publishes a nitrate value of 14,2 mg/L for the supply zone Versorgungsgebiet Erbach (mit Ortsteilen Lauerbach, Erlenbach und Roßbach). The statutory parametric value is 50 mg/l; the measured value represents 28 % of the parametric value. Basis: Januar 2026, retrieved on 11/07/2026.
- Who supplies the drinking water in Postcode 64711?
- Wasserversorgung Erbach AöR. The values shown here come from the supply zone Versorgungsgebiet Erbach (mit Ortsteilen Lauerbach, Erlenbach und Roßbach) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.