Skip to content
maunawai.info

Drinking water in 64673

For this postcode GGEW AG (Gruppen-Gas- und Elektrizitätswerk Bergstraße Aktiengesellschaft) publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
22.1 °dH
Hardness range hard
Key values Zwingenberg
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15,5 mg/l 50 mg/l
31 %
Single value
Lead 0,00063 mg/l 10 µg/l
6 %
Single value
Escherichia coli (E. coli) 0 MPN/100ml 0/100 ml Single value
Sulphate 64,1 mg/l 250 mg/l
26 %
Single value
Sodium 18,9 mg/l 200 mg/l
9 %
Single value
Show all recorded parameters (46 — most recent value per parameter)

Microbiology (2)

Microbiology – Zwingenberg
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 MPN/100ml 0/100 ml Single value
Intestinal enterococci 0 MPN/100ml 0/100 ml Single value

Chemical parameters (24)

Chemical parameters – Zwingenberg
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,1 µg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Acrylamide <0,05 µg/l
below limit of quantification
0.1 µg/l
< 50 % *
Single value
Antimony < 0,00005 mg/l
below limit of quantification
5 µg/l
< 1 % *
Single value
Arsenic 0,00034 mg/l 10 µg/l
3 %
Single value
Benzene < 0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Benzo(a)pyrene < 0,002 µg/l
below limit of quantification
10 ng/l
< 20 % *
Single value
Bisphenol A < 0,05 µg/l
below limit of quantification
2.5 µg/l
< 2 % *
Single value
Boron 0,031 mg/l 1 mg/l
3 %
Single value
Bromate < 0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Cadmium < 0,00005 mg/l
below limit of quantification
3 µg/l
< 2 % *
Single value
Chromium < 0,00005 mg/l
below limit of quantification
25 µg/l
< 0.2 % *
Single value
Copper 0,0066 mg/l 2 mg/l
0.3 %
Single value
Cyanide < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Epichlorohydrin < 0,05 µg/l
below limit of quantification
0.1 µg/l
< 50 % *
Single value
Fluoride 0,12 mg/l 1.5 mg/l
8 %
Single value
Lead 0,00063 mg/l 10 µg/l
6 %
Single value
Mercury < 0,002 mg/l
below limit of quantification
1 µg/l cannot be assessed — the limit of quantification of the measurement is above the parametric value Single value
Nickel 0,00032 mg/l 20 µg/l
2 %
Single value
Nitrate 15,5 mg/l 50 mg/l
31 %
Single value
Nitrite < 0,030 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value
Selenium 0,00011 mg/l 10 µg/l
1 %
Single value
Trihalomethanes — Total n.b. µg/l
not determined
50 µg/l Single value
Uranium 0,00086 mg/l 10 µg/l
9 %
Single value
Vinyl chloride <0,2 µg/l
below limit of quantification
0.5 µg/l
< 40 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (14)

Indicator parameters – Zwingenberg
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,015 mg/l
below limit of quantification
0.2 mg/l
< 8 % *
Single value
Ammonium < 0,026 mg/l
below limit of quantification
0.5 mg/l
< 5 % *
Single value
Chloride 33,6 mg/l 250 mg/l
13 %
Single value
Coliform bacteria 0 MPN/100ml 0/100 ml Single value
Colour < 0,1 1/m
below limit of quantification
0.5 m⁻¹ Single value
Iron < 0,0050 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Manganese 0,0068 mg/l 50 µg/l
14 %
Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 7,46 pH 6,5–9,5 Single value
Sodium 18,9 mg/l 200 mg/l
9 %
Single value
Sulphate 64,1 mg/l 250 mg/l
26 %
Single value
Taste neutral für den Verbraucher annehmbar Single value
Total organic carbon (TOC) 1,5 mg/l ohne anormale Veränderung Single value
Turbidity < 0,30 FNU
below limit of quantification
1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Zwingenberg
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 5,94 mmol/l Single value
Calcium 129 mg/l Single value
Hydrogen carbonate 360 mg/l Single value
Magnesium 17,6 mg/l Single value
Potassium 2,27 mg/l Single value
Total hardness 3,94 mmol/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 1 more supply zone in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
19.2 °dH
Hardness range hard
Key values Alsbach-Hähnlein und Bickenbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 41 mg/l 50 mg/l
82 %
Maximum
Lead < 0,001 µg/l
below limit of quantification
10 µg/l
< < 0.1 % *
Single value
Escherichia coli (E. coli) 0 MPN/100ml 0/100 ml Single value
Sulphate 38,9 mg/l 250 mg/l
16 %
Maximum
Sodium 9,5 mg/l 200 mg/l
5 %
Maximum

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (46 — most recent value per parameter)

Microbiology (2)

Microbiology – Alsbach-Hähnlein und Bickenbach
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 MPN/100ml 0/100 ml Single value
Intestinal enterococci 0 MPN/100ml 0/100 ml Single value

Chemical parameters (24)

Chemical parameters – Alsbach-Hähnlein und Bickenbach
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,1 µg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Acrylamide <0,05 µg/l
below limit of quantification
0.1 µg/l
< 50 % *
Single value
Antimony < 0,001 µg/l
below limit of quantification
5 µg/l
< < 0.1 % *
Single value
Arsenic < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Benzene < 0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Benzo(a)pyrene < 0,002 µg/l
below limit of quantification
10 ng/l
< 20 % *
Single value
Bisphenol A < 0,05 µg/l
below limit of quantification
2.5 µg/l
< 2 % *
Single value
Boron < 0,01 mg/l
below limit of quantification
1 mg/l
< 1 % *
Single value
Bromate < 0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Cadmium < 0,00005 mg/l
below limit of quantification
3 µg/l
< 2 % *
Single value
Chromium < 0,005 mg/l
below limit of quantification
25 µg/l
< 20 % *
Single value
Copper < 0,007 mg/l
below limit of quantification
2 mg/l
< 0.4 % *
Single value
Cyanide < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Epichlorohydrin < 0,05 µg/l
below limit of quantification
0.1 µg/l
< 50 % *
Single value
Fluoride <0,15 mg/l
below limit of quantification
1.5 mg/l
< 10 % *
Single value
Lead < 0,001 µg/l
below limit of quantification
10 µg/l
< < 0.1 % *
Single value
Mercury < 0,000002 mg/l
below limit of quantification
1 µg/l
< 0.2 % *
Single value
Nickel < 0,005 µg/l
below limit of quantification
20 µg/l
< < 0.1 % *
Single value
Nitrate 41 mg/l 50 mg/l
82 %
Maximum
Nitrite < 0,030 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Trihalomethanes — Total n.b. µg/l
not determined
50 µg/l Single value
Uranium 0,006 mg/l 10 µg/l
60 %
Maximum
Vinyl chloride <0,2 µg/l
below limit of quantification
0.5 µg/l
< 40 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (14)

Indicator parameters – Alsbach-Hähnlein und Bickenbach
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,015 mg/l
below limit of quantification
0.2 mg/l
< 8 % *
Single value
Ammonium < 0,026 mg/l
below limit of quantification
0.5 mg/l
< 5 % *
Single value
Chloride 26,7 mg/l 250 mg/l
11 %
Maximum
Coliform bacteria 0 MPN/100ml 0/100 ml Single value
Colour 0,1 1/m 0.5 m⁻¹ Single value
Iron < 0,005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Manganese 0,006 mg/l 50 µg/l
12 %
Maximum
Odour ohne für den Verbraucher annehmbar Single value
pH 7,56 pH 6,5–9,5 Maximum
Sodium 9,5 mg/l 200 mg/l
5 %
Maximum
Sulphate 38,9 mg/l 250 mg/l
16 %
Maximum
Taste neutral für den Verbraucher annehmbar Single value
Total organic carbon (TOC) 0,55 mg/l ohne anormale Veränderung Maximum
Turbidity < 0,30 FNU
below limit of quantification
1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Alsbach-Hähnlein und Bickenbach
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 6,01 mmol/l Maximum
Calcium 106 mg/l Maximum
Hydrogen carbonate 323 mg/l Maximum
Magnesium 23,4 mg/l Maximum
Potassium 1,80 mg/l Maximum
Total hardness 3,42 mmol/l Maximum

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 64673

How hard is the water in Postcode 64673?
GGEW AG (Gruppen-Gas- und Elektrizitätswerk Bergstraße Aktiengesellschaft) publishes a total hardness of 3,94 mmol/l for the supply zone Zwingenberg — that corresponds to 22.1 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 25/07/2026.
How much nitrate is in the drinking water in Postcode 64673?
GGEW AG (Gruppen-Gas- und Elektrizitätswerk Bergstraße Aktiengesellschaft) publishes a nitrate value of 15,5 mg/l for the supply zone Zwingenberg. The statutory parametric value is 50 mg/l; the measured value represents 31 % of the parametric value. Basis: Publication by the water supplier, retrieved on 25/07/2026.
Who supplies the drinking water in Postcode 64673?
GGEW AG (Gruppen-Gas- und Elektrizitätswerk Bergstraße Aktiengesellschaft). The values shown here come from the supply zone Zwingenberg and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.