Skip to content
maunawai.info

Drinking water in 64668

One supply zone, water supplier: Rimbach.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

wp-rimbach gesamt

Rimbach

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 17/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
10.8 °dH
Hardness range mittel
Key values wp-rimbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.3 mg/l 50 mg/l
9 %
Single value
Sulphate 15 mg/l 250 mg/l
6 %
Single value
Sodium 9.3 mg/l 200 mg/l
5 %
Single value
Show all recorded parameters (26 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – wp-rimbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Arsenic 0.001 mg/l 10 µg/l
10 %
Single value
Nitrate 4.3 mg/l 50 mg/l
9 %
Single value
Nitrite 0.01 mg/l 0.5 mg/l
2 %
Single value

Indicator parameters (15)

Indicator parameters – wp-rimbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0.02 mg/l 0.2 mg/l
10 %
Single value
Ammonium 0.05 mg/l 0.5 mg/l
10 %
Single value
Calcite dissolution capacity -10 mg/l 5 mg/l CaCO3 Single value
Chloride 15 mg/l 250 mg/l
6 %
Single value
Colour farblos 1/m 0.5 m⁻¹ Single value
Conductivity (25 °C) 406 µS/cm 2,790 µS/cm Single value
Iron 0.02 mg/l 0.2 mg/l
10 %
Single value
Manganese 0.005 mg/l 50 µg/l
10 %
Single value
pH 7.82 6,5–9,5 Single value
Sodium 9.3 mg/l 200 mg/l
5 %
Single value
Sulphate 15 mg/l 250 mg/l
6 %
Single value
Temperature 15.6 °C Single value
Threshold odour number (TON) 1 Single value
Total organic carbon (TOC) 0.5 mg/l ohne anormale Veränderung Single value
Turbidity 0.1 TE/F 1 NTU Single value

Further parameters (8)

Further parameters – wp-rimbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3.41 mmol/l Single value
Base capacity to pH 8.2 0.08 mmol/l Single value
Calcium 60.3 mg/l Single value
Carbonate hardness 9.4 °dH Single value
Hardness range (WRMG) mittel Single value
Magnesium 10.2 mg/l Single value
Potassium 1.2 mg/l Single value
Total hardness 10.8 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://oeffentlichkeit.gw-manager.com/gebiete/7D5EFB09-0028-457A-B91D-4AB0907F52F9 · 2025-07-17 · 2025-07-17 · retrieved on 27/07/2026

Frequent questions about postcode 64668

How hard is the water in Postcode 64668?
Rimbach publishes a total hardness of 10.8 °dH for the supply zone wp-rimbach gesamt (hardness range mittel). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025-07-17, retrieved on 27/07/2026.
How much nitrate is in the drinking water in Postcode 64668?
Rimbach publishes a nitrate value of 4.3 mg/l for the supply zone wp-rimbach gesamt. The statutory parametric value is 50 mg/l; the measured value represents 9 % of the parametric value. Basis: 2025-07-17, retrieved on 27/07/2026.
Who supplies the drinking water in Postcode 64668?
Rimbach. The values shown here come from the supply zone wp-rimbach gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.