Skip to content
maunawai.info

Drinking water in 64405

For this postcode Gemeinde Fischbachtal publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 4 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Billings und Steinau

Gemeinde Fischbachtal

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
5.2 °dH
Hardness range 1 (weich)

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Billings und Steinau
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 1 (weich) Single value · Billings und Steinau
Total hardness 5,2 °dH Single value · Billings und Steinau

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.fischbachtal.de/rathaus/verfahren/wasserhaerte-id_44/ · November 2024 · retrieved on 14/07/2026
Show 4 more supply zones in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
7.3 °dH
Hardness range 1 (weich)

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Lichtenberg
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 1 (weich) Single value · Lichtenberg
Total hardness 7,3 °dH Single value · Lichtenberg

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.fischbachtal.de/rathaus/verfahren/wasserhaerte-id_44/ · November 2024 · retrieved on 14/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
7.2 °dH
Hardness range 1 (weich)

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Meßbach
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 1 (weich) Single value · Meßbach
Total hardness 7,2 °dH Single value · Meßbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.fischbachtal.de/rathaus/verfahren/wasserhaerte-id_44/ · November 2024 · retrieved on 14/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
6 °dH
Hardness range 1 (weich)

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Niedernhausen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 1 (weich) Single value · Niedernhausen
Total hardness 6,0 °dH Single value · Niedernhausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.fischbachtal.de/rathaus/verfahren/wasserhaerte-id_44/ · November 2024 · retrieved on 14/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
6.3 °dH
Hardness range 1 (weich)

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Nonrod
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 1 (weich) Single value · Nonrod
Total hardness 6,3 °dH Single value · Nonrod

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.fischbachtal.de/rathaus/verfahren/wasserhaerte-id_44/ · November 2024 · retrieved on 14/07/2026

Frequent questions about postcode 64405

How hard is the water in Postcode 64405?
Gemeinde Fischbachtal publishes a total hardness of 5.2 °dH for the supply zone Billings und Steinau (hardness range 1 (weich)). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: November 2024, retrieved on 14/07/2026.
Who supplies the drinking water in Postcode 64405?
Gemeinde Fischbachtal. The values shown here come from the supply zone Billings und Steinau and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.