Skip to content
maunawai.info

Drinking water in 63849

One supply zone, water supplier: Kommunalunternehmen Gemeinde Leidersbach.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Leidersbach, MS ON, Roßbach

Kommunalunternehmen Gemeinde Leidersbach

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 01/09/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
3.3 °dH
Hardness range weich
Key values Leidersbach, MS ON, Roßbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6,2 mg/l 50 mg/l
12 %
Single value
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Sulphate 4,0 mg/l 250 mg/l
2 %
Single value
Sodium 2,1 mg/l 200 mg/l
1 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (87 — most recent value per parameter)

Chemical parameters (68)

Chemical parameters – Leidersbach, MS ON, Roßbach
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Antimony <0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic <0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Atrazine <0,02 µg/l
below limit of quantification
Single value
Azoxystrobin <0,02 µg/l
below limit of quantification
Single value
Bentazone <0,02 µg/l
below limit of quantification
Single value
Benzene <0,0002 mg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Benzo(a)pyrene <0,000003 mg/l
below limit of quantification
10 ng/l
< 30 % *
Single value
Boron 0,01 mg/l 1 mg/l
1 %
Single value
Boscalid <0,02 µg/l
below limit of quantification
Single value
Bromacil <0,02 µg/l
below limit of quantification
Single value
Bromate <0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Bromoxynil <0,02 µg/l
below limit of quantification
Single value
Cadmium <0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Single value
Carbendazim <0,02 µg/l
below limit of quantification
Single value
Chloridazon <0,02 µg/l
below limit of quantification
Single value
Chlorotoluron <0,02 µg/l
below limit of quantification
Single value
Chromium <0,0002 mg/l
below limit of quantification
25 µg/l
< 0.8 % *
Single value
Clopyralid <0,05 µg/l
below limit of quantification
Single value
Copper 0,004 mg/l 2 mg/l
0.2 %
Single value
Cyanide <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Desethylatrazine <0,02 µg/l
below limit of quantification
Single value
Desethylterbuthylazine <0,02 µg/l
below limit of quantification
Single value
Desisopropylatrazine <0,02 µg/l
below limit of quantification
Single value
Dicamba <0,05 µg/l
below limit of quantification
Single value
Dichlorprop <0,02 µg/l
below limit of quantification
Single value
Diflufenican <0,02 µg/l
below limit of quantification
Single value
Dimefuron <0,02 µg/l
below limit of quantification
Single value
Dimethachlor <0,02 µg/l
below limit of quantification
Single value
Dimethenamid <0,02 µg/l
below limit of quantification
Single value
Dimethoate <0,02 µg/l
below limit of quantification
Single value
Diuron <0,02 µg/l
below limit of quantification
Single value
Ethidimuron <0,02 µg/l
below limit of quantification
Single value
Ethofumesate <0,02 µg/l
below limit of quantification
Single value
Flufenacet <0,02 µg/l
below limit of quantification
Single value
Fluoride 0,03 mg/l 1.5 mg/l
2 %
Single value
Glyphosate <0,05 µg/l
below limit of quantification
Single value
Imidacloprid <0,02 µg/l
below limit of quantification
Single value
Isoproturon <0,02 µg/l
below limit of quantification
Single value
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Lenacil <0,02 µg/l
below limit of quantification
Single value
MCPA <0,02 µg/l
below limit of quantification
Single value
Mecoprop <0,02 µg/l
below limit of quantification
Single value
Mercury <0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Metalaxyl <0,02 µg/l
below limit of quantification
Single value
Metamitron <0,02 µg/l
below limit of quantification
Single value
Metazachlor <0,02 µg/l
below limit of quantification
Single value
Metobromuron <0,02 µg/l
below limit of quantification
Single value
Metolachlor <0,02 µg/l
below limit of quantification
Single value
Metribuzin <0,02 µg/l
below limit of quantification
Single value
Nickel <0,001 mg/l
below limit of quantification
20 µg/l
< 5 % *
Single value
Nicosulfuron <0,02 µg/l
below limit of quantification
Single value
Nitrate 6,2 mg/l 50 mg/l
12 %
Single value
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pendimethalin <0,02 µg/l
below limit of quantification
Single value
Polycyclic aromatic hydrocarbons <0,00002 mg/l
below limit of quantification
0.1 µg/l
< 20 % *
Single value
Propazine <0,02 µg/l
below limit of quantification
Single value
Propiconazole <0,02 µg/l
below limit of quantification
Single value
Prosulfocarb <0,02 µg/l
below limit of quantification
Single value
Quinmerac <0,02 µg/l
below limit of quantification
Single value
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Simazine <0,02 µg/l
below limit of quantification
Single value
Tebuconazole <0,02 µg/l
below limit of quantification
Single value
Terbuthylazine <0,02 µg/l
below limit of quantification
Single value
Thiacloprid <0,02 µg/l
below limit of quantification
Single value
Triadimenol <0,02 µg/l
below limit of quantification
Single value
Trihalomethanes — Total <0,001 mg/l
below limit of quantification
50 µg/l
< 2 % *
Single value
Uranium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (12)

Indicator parameters – Leidersbach, MS ON, Roßbach
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,013 mg/l 0.2 mg/l
6 %
Single value
Ammonium 0,01 mg/l 0.5 mg/l
2 %
Single value
Calcite dissolution capacity 1,0 mg/l 5 mg/l CaCO3 Single value
Chloride 3,4 mg/l 250 mg/l
1 %
Single value
Colour <0,02 1/m
below limit of quantification
0.5 m⁻¹ Single value
Iron 0,005 mg/l 0.2 mg/l
3 %
Single value
Manganese <0,001 mg/l
below limit of quantification
50 µg/l
< 2 % *
Single value
Sodium 2,1 mg/l 200 mg/l
1 %
Single value
Sulphate 4,0 mg/l 250 mg/l
2 %
Single value
Taste typisch für den Verbraucher annehmbar Single value
Total organic carbon (TOC) 0,3 mg/l ohne anormale Veränderung Single value
Turbidity 0,06 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (7)

Further parameters – Leidersbach, MS ON, Roßbach
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 1,12 mmol/l Single value
Calcium 21,7 mg/l Single value
Hardness range (WRMG) weich Single value
Magnesium 1,0 mg/l Single value
Potassium 1,8 mg/l Single value
Sum of alkaline earth metals 0,58 mmol/l Single value
Total hardness 3,3 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 63849

How hard is the water in Postcode 63849?
Kommunalunternehmen Gemeinde Leidersbach publishes a total hardness of 3.3 °dH for the supply zone Leidersbach, MS ON, Roßbach (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 01.09.2023, retrieved on 25/07/2026.
How much nitrate is in the drinking water in Postcode 63849?
Kommunalunternehmen Gemeinde Leidersbach publishes a nitrate value of 6,2 mg/l for the supply zone Leidersbach, MS ON, Roßbach. The statutory parametric value is 50 mg/l; the measured value represents 12 % of the parametric value. Basis: 01.09.2023, retrieved on 25/07/2026.
Who supplies the drinking water in Postcode 63849?
Kommunalunternehmen Gemeinde Leidersbach. The values shown here come from the supply zone Leidersbach, MS ON, Roßbach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.