Skip to content
maunawai.info

Drinking water in 61279

For this postcode Gemeinde Wehrheim publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 3 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Friedrichsthal Hoch- und Tiefzone

Gemeinde Wehrheim

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.9 °dH
Hardness range weich
Key values Friedrichsthal Hoch- und Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 8,9 mg/l 50 mg/l
18 %
Single value · Friedrichsthal Hoch- und Tiefzone
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Friedrichsthal Hoch- und Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 8,9 mg/l 50 mg/l
18 %
Single value · Friedrichsthal Hoch- und Tiefzone
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Friedrichsthal Hoch- und Tiefzone

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (3)

Indicator parameters – Friedrichsthal Hoch- und Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Iron 0,02 mg/l 0.2 mg/l
10 %
Single value · Friedrichsthal Hoch- und Tiefzone
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Friedrichsthal Hoch- und Tiefzone
pH 8,10 ° dH 6,5–9,5 Single value · Friedrichsthal Hoch- und Tiefzone

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (3)

Further parameters – Friedrichsthal Hoch- und Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Calcium 27,2 mg/l Single value · Friedrichsthal Hoch- und Tiefzone
Hardness range (WRMG) weich Single value · Friedrichsthal Hoch- und Tiefzone
Total hardness 5,90 ° dH Single value · Friedrichsthal Hoch- und Tiefzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 3 more supply zones in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
3.1 °dH
Hardness range weich
Key values Obernhain
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5,3 mg/l 50 mg/l
11 %
Single value · Obernhain
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Obernhain
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5,3 mg/l 50 mg/l
11 %
Single value · Obernhain
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Obernhain

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (3)

Indicator parameters – Obernhain
Parameter Value Parametric value Share of the parametric value Reference
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Obernhain
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Obernhain
pH 7,94 ° dH 6,5–9,5 Single value · Obernhain

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (3)

Further parameters – Obernhain
Parameter Value Parametric value Share of the parametric value Reference
Calcium 17,8 mg/l Single value · Obernhain
Hardness range (WRMG) weich Single value · Obernhain
Total hardness 3,10 ° dH Single value · Obernhain

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Pfaffenwiesbach Hoch- und Tiefzone

Gemeinde Wehrheim

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
6 °dH
Hardness range weich
Key values Pfaffenwiesbach Hoch- und Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 8,7 mg/l 50 mg/l
17 %
Single value · Pfaffenwiesbach Hoch- und Tiefzone
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Pfaffenwiesbach Hoch- und Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 8,7 mg/l 50 mg/l
17 %
Single value · Pfaffenwiesbach Hoch- und Tiefzone
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Pfaffenwiesbach Hoch- und Tiefzone

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (3)

Indicator parameters – Pfaffenwiesbach Hoch- und Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Pfaffenwiesbach Hoch- und Tiefzone
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Pfaffenwiesbach Hoch- und Tiefzone
pH 8,31 ° dH 6,5–9,5 Single value · Pfaffenwiesbach Hoch- und Tiefzone

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (3)

Further parameters – Pfaffenwiesbach Hoch- und Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Calcium 28,1 mg/l Single value · Pfaffenwiesbach Hoch- und Tiefzone
Hardness range (WRMG) weich Single value · Pfaffenwiesbach Hoch- und Tiefzone
Total hardness 6,00 ° dH Single value · Pfaffenwiesbach Hoch- und Tiefzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
10.3 °dH
Hardness range mittel
Key values Wehrheim
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15,1 mg/l 50 mg/l
30 %
Single value · Wehrheim
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Wehrheim
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15,1 mg/l 50 mg/l
30 %
Single value · Wehrheim
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Wehrheim

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (3)

Indicator parameters – Wehrheim
Parameter Value Parametric value Share of the parametric value Reference
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Wehrheim
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Wehrheim
pH 7,66 ° dH 6,5–9,5 Single value · Wehrheim

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (3)

Further parameters – Wehrheim
Parameter Value Parametric value Share of the parametric value Reference
Calcium 41,4 mg/l Single value · Wehrheim
Hardness range (WRMG) mittel Single value · Wehrheim
Total hardness 10,30 ° dH Single value · Wehrheim

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 61279

How hard is the water in Postcode 61279?
Gemeinde Wehrheim publishes a total hardness of 5.9 °dH for the supply zone Friedrichsthal Hoch- und Tiefzone (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
How much nitrate is in the drinking water in Postcode 61279?
Gemeinde Wehrheim publishes a nitrate value of 8,9 mg/l for the supply zone Friedrichsthal Hoch- und Tiefzone. The statutory parametric value is 50 mg/l; the measured value represents 18 % of the parametric value. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Who supplies the drinking water in Postcode 61279?
Gemeinde Wehrheim. The values shown here come from the supply zone Friedrichsthal Hoch- und Tiefzone and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.