Skip to content
maunawai.info

Drinking water in 56132

For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 3 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
13.7 °dH
Hardness range medium
Key values Becheln-Frücht
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Becheln-Frücht
Nitrate 41.3 mg/L 50 mg/l
83 %
Mean · Becheln-Frücht
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Becheln-Frücht
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Becheln-Frücht
Sulphate 25.4 mg/L 250 mg/l
10 %
Mean · Becheln-Frücht
Sodium 21.8 mg/L 200 mg/l
11 %
Mean · Becheln-Frücht

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – Becheln-Frücht
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Becheln-Frücht

Chemical parameters (14)

Chemical parameters – Becheln-Frücht
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0.5 µg/L
below limit of quantification
5 µg/l
< 10 % *
Mean · Becheln-Frücht
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Becheln-Frücht
Boron < 0.02 mg/L
below limit of quantification
1 mg/l
< 2 % *
Mean · Becheln-Frücht
Cadmium < 0.3 µg/L
below limit of quantification
3 µg/l
< 10 % *
Mean · Becheln-Frücht
Copper 0.015 mg/L 2 mg/l
0.8 %
Mean · Becheln-Frücht
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Becheln-Frücht
Fluoride 0.1 mg/L 1.5 mg/l
7 %
Mean · Becheln-Frücht
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Becheln-Frücht
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · Becheln-Frücht
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · Becheln-Frücht
Nitrate 41.3 mg/L 50 mg/l
83 %
Mean · Becheln-Frücht
Nitrite < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · Becheln-Frücht
Selenium < 0.5 µg/L
below limit of quantification
10 µg/l
< 5 % *
Mean · Becheln-Frücht
Uranium 0.2 µg/L 10 µg/l
2 %
Mean · Becheln-Frücht

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Becheln-Frücht
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Becheln-Frücht

Indicator parameters (10)

Indicator parameters – Becheln-Frücht
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · Becheln-Frücht
Ammonium < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · Becheln-Frücht
Chloride 45 mg/L 250 mg/l
18 %
Mean · Becheln-Frücht
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · Becheln-Frücht
Iron 0.024 mg/L 0.2 mg/l
12 %
Mean · Becheln-Frücht
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Becheln-Frücht
pH 7.97 - 6,5–9,5 Mean · Becheln-Frücht
Sodium 21.8 mg/L 200 mg/l
11 %
Mean · Becheln-Frücht
Sulphate 25.4 mg/L 250 mg/l
10 %
Mean · Becheln-Frücht
Temperature 10 °C Mean · Becheln-Frücht

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Becheln-Frücht
Parameter Value Parametric value Share of the parametric value Reference
Calcium 43.9 mg/L Mean · Becheln-Frücht
Magnesium 11.2 mg/L Mean · Becheln-Frücht
Potassium 2.5 mg/L Mean · Becheln-Frücht
Total hardness 2.45 mmol/l Mean · Becheln-Frücht

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2589698050/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026
Show 3 more supply zones in this postcode

Fachbach-Nievern TZ-Miellen

TWIST RLP - Fachbach-Nievern TZ-Miellen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
17.7 °dH
Hardness range hard
Key values Fachbach-Nievern TZ-Miellen
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Fachbach-Nievern TZ-Miellen
Nitrate 2.1 mg/L 50 mg/l
4 %
Mean · Fachbach-Nievern TZ-Miellen
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Fachbach-Nievern TZ-Miellen
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Fachbach-Nievern TZ-Miellen
Sulphate 52.4 mg/L 250 mg/l
21 %
Mean · Fachbach-Nievern TZ-Miellen
Sodium 19.2 mg/L 200 mg/l
10 %
Mean · Fachbach-Nievern TZ-Miellen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – Fachbach-Nievern TZ-Miellen
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Fachbach-Nievern TZ-Miellen

Chemical parameters (14)

Chemical parameters – Fachbach-Nievern TZ-Miellen
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0.5 µg/L
below limit of quantification
5 µg/l
< 10 % *
Mean · Fachbach-Nievern TZ-Miellen
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Fachbach-Nievern TZ-Miellen
Boron < 0.02 mg/L
below limit of quantification
1 mg/l
< 2 % *
Mean · Fachbach-Nievern TZ-Miellen
Cadmium < 0.3 µg/L
below limit of quantification
3 µg/l
< 10 % *
Mean · Fachbach-Nievern TZ-Miellen
Copper < 0.005 mg/L
below limit of quantification
2 mg/l
< 0.3 % *
Mean · Fachbach-Nievern TZ-Miellen
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Fachbach-Nievern TZ-Miellen
Fluoride 0.07 mg/L 1.5 mg/l
5 %
Mean · Fachbach-Nievern TZ-Miellen
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Fachbach-Nievern TZ-Miellen
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · Fachbach-Nievern TZ-Miellen
Nickel 3 µg/L 20 µg/l
15 %
Mean · Fachbach-Nievern TZ-Miellen
Nitrate 2.1 mg/L 50 mg/l
4 %
Mean · Fachbach-Nievern TZ-Miellen
Nitrite < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · Fachbach-Nievern TZ-Miellen
Selenium < 0.5 µg/L
below limit of quantification
10 µg/l
< 5 % *
Mean · Fachbach-Nievern TZ-Miellen
Uranium < 0.1 µg/L
below limit of quantification
10 µg/l
< 1 % *
Mean · Fachbach-Nievern TZ-Miellen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Fachbach-Nievern TZ-Miellen
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Fachbach-Nievern TZ-Miellen

Indicator parameters (10)

Indicator parameters – Fachbach-Nievern TZ-Miellen
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · Fachbach-Nievern TZ-Miellen
Ammonium 0.01 mg/L 0.5 mg/l
2 %
Mean · Fachbach-Nievern TZ-Miellen
Chloride 31.4 mg/L 250 mg/l
13 %
Mean · Fachbach-Nievern TZ-Miellen
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · Fachbach-Nievern TZ-Miellen
Iron 0.019 mg/L 0.2 mg/l
10 %
Mean · Fachbach-Nievern TZ-Miellen
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Fachbach-Nievern TZ-Miellen
pH 7.89 - 6,5–9,5 Mean · Fachbach-Nievern TZ-Miellen
Sodium 19.2 mg/L 200 mg/l
10 %
Mean · Fachbach-Nievern TZ-Miellen
Sulphate 52.4 mg/L 250 mg/l
21 %
Mean · Fachbach-Nievern TZ-Miellen
Temperature 12 °C Mean · Fachbach-Nievern TZ-Miellen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Fachbach-Nievern TZ-Miellen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 32.9 mg/L Mean · Fachbach-Nievern TZ-Miellen
Magnesium 30.1 mg/L Mean · Fachbach-Nievern TZ-Miellen
Potassium 2.7 mg/L Mean · Fachbach-Nievern TZ-Miellen
Total hardness 3.16 mmol/l Mean · Fachbach-Nievern TZ-Miellen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2589697800/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Key values Kemmenau-Dausenau
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Kemmenau-Dausenau
Nitrate 2.4 mg/L 50 mg/l
5 %
Mean · Kemmenau-Dausenau
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Kemmenau-Dausenau
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Kemmenau-Dausenau
Sulphate 48.3 mg/L 250 mg/l
19 %
Mean · Kemmenau-Dausenau
Sodium 18.3 mg/L 200 mg/l
9 %
Mean · Kemmenau-Dausenau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (29 — most recent value per parameter)

Microbiology (1)

Microbiology – Kemmenau-Dausenau
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Kemmenau-Dausenau

Chemical parameters (14)

Chemical parameters – Kemmenau-Dausenau
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0.5 µg/L
below limit of quantification
5 µg/l
< 10 % *
Mean · Kemmenau-Dausenau
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Kemmenau-Dausenau
Boron < 0.02 mg/L
below limit of quantification
1 mg/l
< 2 % *
Mean · Kemmenau-Dausenau
Cadmium < 0.3 µg/L
below limit of quantification
3 µg/l
< 10 % *
Mean · Kemmenau-Dausenau
Copper 0.007 mg/L 2 mg/l
0.4 %
Mean · Kemmenau-Dausenau
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Kemmenau-Dausenau
Fluoride 0.07 mg/L 1.5 mg/l
5 %
Mean · Kemmenau-Dausenau
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Kemmenau-Dausenau
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · Kemmenau-Dausenau
Nickel 3 µg/L 20 µg/l
15 %
Mean · Kemmenau-Dausenau
Nitrate 2.4 mg/L 50 mg/l
5 %
Mean · Kemmenau-Dausenau
Nitrite < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · Kemmenau-Dausenau
Selenium < 0.5 µg/L
below limit of quantification
10 µg/l
< 5 % *
Mean · Kemmenau-Dausenau
Uranium 0.14 µg/L 10 µg/l
1 %
Mean · Kemmenau-Dausenau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Kemmenau-Dausenau
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Kemmenau-Dausenau

Indicator parameters (10)

Indicator parameters – Kemmenau-Dausenau
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · Kemmenau-Dausenau
Ammonium < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · Kemmenau-Dausenau
Chloride 33.6 mg/L 250 mg/l
13 %
Mean · Kemmenau-Dausenau
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · Kemmenau-Dausenau
Iron 0.032 mg/L 0.2 mg/l
16 %
Mean · Kemmenau-Dausenau
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Kemmenau-Dausenau
pH 7.84 - 6,5–9,5 Mean · Kemmenau-Dausenau
Sodium 18.3 mg/L 200 mg/l
9 %
Mean · Kemmenau-Dausenau
Sulphate 48.3 mg/L 250 mg/l
19 %
Mean · Kemmenau-Dausenau
Temperature 13 °C Mean · Kemmenau-Dausenau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (3)

Further parameters – Kemmenau-Dausenau
Parameter Value Parametric value Share of the parametric value Reference
Calcium 38.1 mg/L Mean · Kemmenau-Dausenau
Magnesium 24.9 mg/L Mean · Kemmenau-Dausenau
Potassium 3.2 mg/L Mean · Kemmenau-Dausenau

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2589696983/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
12 °dH
Hardness range medium
Key values Nievern HZ
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.7 mg/L 50 mg/l
9 %
Mean · Nievern HZ
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Nievern HZ
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Nievern HZ
Sulphate 73.4 mg/L 250 mg/l
29 %
Mean · Nievern HZ
Sodium 16.8 mg/L 200 mg/l
8 %
Mean · Nievern HZ

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (29 — most recent value per parameter)

Microbiology (1)

Microbiology – Nievern HZ
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Nievern HZ

Chemical parameters (14)

Chemical parameters – Nievern HZ
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0.5 µg/L
below limit of quantification
5 µg/l
< 10 % *
Mean · Nievern HZ
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Nievern HZ
Boron 0.03 mg/L 1 mg/l
3 %
Mean · Nievern HZ
Cadmium 0.8 µg/L 3 µg/l
27 %
Mean · Nievern HZ
Copper 0.006 mg/L 2 mg/l
0.3 %
Mean · Nievern HZ
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Nievern HZ
Fluoride 0.13 mg/L 1.5 mg/l
9 %
Mean · Nievern HZ
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Nievern HZ
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · Nievern HZ
Nickel 8 µg/L 20 µg/l
40 %
Mean · Nievern HZ
Nitrate 4.7 mg/L 50 mg/l
9 %
Mean · Nievern HZ
Nitrite < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · Nievern HZ
Selenium 0.5 µg/L 10 µg/l
5 %
Mean · Nievern HZ
Uranium 0.16 µg/L 10 µg/l
2 %
Mean · Nievern HZ

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (10)

Indicator parameters – Nievern HZ
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · Nievern HZ
Ammonium < 0.01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Mean · Nievern HZ
Chloride 26.7 mg/L 250 mg/l
11 %
Mean · Nievern HZ
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · Nievern HZ
Iron 0.007 mg/L 0.2 mg/l
3 %
Mean · Nievern HZ
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Nievern HZ
pH 7.8 - 6,5–9,5 Mean · Nievern HZ
Sodium 16.8 mg/L 200 mg/l
8 %
Mean · Nievern HZ
Sulphate 73.4 mg/L 250 mg/l
29 %
Mean · Nievern HZ
Temperature 13 °C Mean · Nievern HZ

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Nievern HZ
Parameter Value Parametric value Share of the parametric value Reference
Calcium 47 mg/L Mean · Nievern HZ
Magnesium 24.5 mg/L Mean · Nievern HZ
Potassium 2.8 mg/L Mean · Nievern HZ
Total hardness 2.14 mmol/l Mean · Nievern HZ

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2589695467/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Frequent questions about postcode 56132

How hard is the water in Postcode 56132?
TWIST RLP - Becheln-Frücht publishes a total hardness of 2.45 mmol/l for the supply zone Becheln-Frücht — that corresponds to 13.7 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
How much nitrate is in the drinking water in Postcode 56132?
TWIST RLP - Becheln-Frücht publishes a nitrate value of 41.3 mg/L for the supply zone Becheln-Frücht. The statutory parametric value is 50 mg/l; the measured value represents 83 % of the parametric value. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Are PFAS detectable in the drinking water in Postcode 56132?
TWIST RLP - Becheln-Frücht publishes for the supply zone Becheln-Frücht a sum value PFAS-20 of 0 µg/L. The statutory parametric value is 0.1 µg/l; the measured value represents 0 % of the parametric value. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Who supplies the drinking water in Postcode 56132?
TWIST RLP - Becheln-Frücht. The values shown here come from the supply zone Becheln-Frücht and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.