Skip to content
maunawai.info

Drinking water in 55487

For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 2 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
4.1 °dH
Hardness range soft
Key values AA Dillendorf (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · AA Dillendorf (WW), TW
Nitrate 2.6 mg/L 50 mg/l
5 %
Mean · AA Dillendorf (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · AA Dillendorf (WW), TW
Sulphate 7.1 mg/L 250 mg/l
3 %
Mean · AA Dillendorf (WW), TW
Sodium 9.4 mg/L 200 mg/l
5 %
Mean · AA Dillendorf (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – AA Dillendorf (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · AA Dillendorf (WW), TW

Chemical parameters (14)

Chemical parameters – AA Dillendorf (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 1 µg/L
below limit of quantification
5 µg/l
< 20 % *
Mean · AA Dillendorf (WW), TW
Arsenic 3 µg/L 10 µg/l
30 %
Mean · AA Dillendorf (WW), TW
Boron < 0.1 mg/L
below limit of quantification
1 mg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
Cadmium < 1 µg/L
below limit of quantification
3 µg/l
< 33 % *
Mean · AA Dillendorf (WW), TW
Copper < 0.002 mg/L
below limit of quantification
2 mg/l
< 0.1 % *
Mean · AA Dillendorf (WW), TW
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
Fluoride 0.13 mg/L 1.5 mg/l
9 %
Mean · AA Dillendorf (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
Nitrate 2.6 mg/L 50 mg/l
5 %
Mean · AA Dillendorf (WW), TW
Nitrite < 0.03 mg/L
below limit of quantification
0.5 mg/l
< 6 % *
Mean · AA Dillendorf (WW), TW
Selenium < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
Uranium < 0.2 µg/L
below limit of quantification
10 µg/l
< 2 % *
Mean · AA Dillendorf (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – AA Dillendorf (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · AA Dillendorf (WW), TW

Indicator parameters (10)

Indicator parameters – AA Dillendorf (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
Chloride 14 mg/L 250 mg/l
6 %
Mean · AA Dillendorf (WW), TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · AA Dillendorf (WW), TW
Iron < 0.001 mg/L
below limit of quantification
0.2 mg/l
< 0.5 % *
Mean · AA Dillendorf (WW), TW
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · AA Dillendorf (WW), TW
pH 8.1 - 6,5–9,5 Mean · AA Dillendorf (WW), TW
Sodium 9.4 mg/L 200 mg/l
5 %
Mean · AA Dillendorf (WW), TW
Sulphate 7.1 mg/L 250 mg/l
3 %
Mean · AA Dillendorf (WW), TW
Temperature 11.9 °C Mean · AA Dillendorf (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – AA Dillendorf (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 24 mg/L Mean · AA Dillendorf (WW), TW
Magnesium 6.5 mg/L Mean · AA Dillendorf (WW), TW
Potassium 0.8 mg/L Mean · AA Dillendorf (WW), TW
Total hardness 0.73 mmol/l Mean · AA Dillendorf (WW), TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2542695460/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026
Show 2 more supply zones in this postcode

HB Hunsrück II (WW), TW

TWIST RLP - HB Hunsrück I (WW), TW

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
3.9 °dH
Hardness range soft
Key values HB Hunsrück II (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · HB Hunsrück II (WW), TW
Nitrate 5.9 mg/L 50 mg/l
12 %
Mean · HB Hunsrück II (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Hunsrück II (WW), TW
Sulphate 4.3 mg/L 250 mg/l
2 %
Mean · HB Hunsrück II (WW), TW
Sodium 3.6 mg/L 200 mg/l
2 %
Mean · HB Hunsrück II (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – HB Hunsrück II (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Hunsrück II (WW), TW

Chemical parameters (14)

Chemical parameters – HB Hunsrück II (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 1 µg/L
below limit of quantification
5 µg/l
< 20 % *
Mean · HB Hunsrück II (WW), TW
Arsenic 2 µg/L 10 µg/l
20 %
Mean · HB Hunsrück II (WW), TW
Boron < 0.1 mg/L
below limit of quantification
1 mg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
Cadmium < 1 µg/L
below limit of quantification
3 µg/l
< 33 % *
Mean · HB Hunsrück II (WW), TW
Copper < 0.002 mg/L
below limit of quantification
2 mg/l
< 0.1 % *
Mean · HB Hunsrück II (WW), TW
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
Fluoride 0.16 mg/L 1.5 mg/l
11 %
Mean · HB Hunsrück II (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
Nitrate 5.9 mg/L 50 mg/l
12 %
Mean · HB Hunsrück II (WW), TW
Nitrite < 0.03 mg/L
below limit of quantification
0.5 mg/l
< 6 % *
Mean · HB Hunsrück II (WW), TW
Selenium < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
Uranium < 0.2 µg/L
below limit of quantification
10 µg/l
< 2 % *
Mean · HB Hunsrück II (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – HB Hunsrück II (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · HB Hunsrück II (WW), TW

Indicator parameters (10)

Indicator parameters – HB Hunsrück II (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
Chloride 4.6 mg/L 250 mg/l
2 %
Mean · HB Hunsrück II (WW), TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · HB Hunsrück II (WW), TW
Iron < 0.001 mg/L
below limit of quantification
0.2 mg/l
< 0.5 % *
Mean · HB Hunsrück II (WW), TW
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · HB Hunsrück II (WW), TW
pH 8.1 - 6,5–9,5 Mean · HB Hunsrück II (WW), TW
Sodium 3.6 mg/L 200 mg/l
2 %
Mean · HB Hunsrück II (WW), TW
Sulphate 4.3 mg/L 250 mg/l
2 %
Mean · HB Hunsrück II (WW), TW
Temperature 10.6 °C Mean · HB Hunsrück II (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – HB Hunsrück II (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 28 mg/L Mean · HB Hunsrück II (WW), TW
Magnesium 3.3 mg/L Mean · HB Hunsrück II (WW), TW
Potassium 1 mg/L Mean · HB Hunsrück II (WW), TW
Total hardness 0.7 mmol/l Mean · HB Hunsrück II (WW), TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2542695415/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
1.8 °dH
Hardness range soft
Key values HB Hunsrück I (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · HB Hunsrück I (WW), TW
Nitrate 5.9 mg/L 50 mg/l
12 %
Mean · HB Hunsrück I (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Hunsrück I (WW), TW
Sulphate 3.9 mg/L 250 mg/l
2 %
Mean · HB Hunsrück I (WW), TW
Sodium 2.8 mg/L 200 mg/l
1 %
Mean · HB Hunsrück I (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – HB Hunsrück I (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · HB Hunsrück I (WW), TW

Chemical parameters (14)

Chemical parameters – HB Hunsrück I (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 1 µg/L
below limit of quantification
5 µg/l
< 20 % *
Mean · HB Hunsrück I (WW), TW
Arsenic 1 µg/L 10 µg/l
10 %
Mean · HB Hunsrück I (WW), TW
Boron < 0.1 mg/L
below limit of quantification
1 mg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
Cadmium < 1 µg/L
below limit of quantification
3 µg/l
< 33 % *
Mean · HB Hunsrück I (WW), TW
Copper < 0.002 mg/L
below limit of quantification
2 mg/l
< 0.1 % *
Mean · HB Hunsrück I (WW), TW
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
Fluoride < 0.1 mg/L
below limit of quantification
1.5 mg/l
< 7 % *
Mean · HB Hunsrück I (WW), TW
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
Nitrate 5.9 mg/L 50 mg/l
12 %
Mean · HB Hunsrück I (WW), TW
Nitrite < 0.03 mg/L
below limit of quantification
0.5 mg/l
< 6 % *
Mean · HB Hunsrück I (WW), TW
Selenium < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
Uranium < 0.2 µg/L
below limit of quantification
10 µg/l
< 2 % *
Mean · HB Hunsrück I (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – HB Hunsrück I (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · HB Hunsrück I (WW), TW

Indicator parameters (10)

Indicator parameters – HB Hunsrück I (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0.02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
Chloride 4.5 mg/L 250 mg/l
2 %
Mean · HB Hunsrück I (WW), TW
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · HB Hunsrück I (WW), TW
Iron < 0.001 mg/L
below limit of quantification
0.2 mg/l
< 0.5 % *
Mean · HB Hunsrück I (WW), TW
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · HB Hunsrück I (WW), TW
pH 7.6 - 6,5–9,5 Mean · HB Hunsrück I (WW), TW
Sodium 2.8 mg/L 200 mg/l
1 %
Mean · HB Hunsrück I (WW), TW
Sulphate 3.9 mg/L 250 mg/l
2 %
Mean · HB Hunsrück I (WW), TW
Temperature 12.3 °C Mean · HB Hunsrück I (WW), TW

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – HB Hunsrück I (WW), TW
Parameter Value Parametric value Share of the parametric value Reference
Calcium 12 mg/L Mean · HB Hunsrück I (WW), TW
Magnesium 1 mg/L Mean · HB Hunsrück I (WW), TW
Potassium 1 mg/L Mean · HB Hunsrück I (WW), TW
Total hardness 0.32 mmol/l Mean · HB Hunsrück I (WW), TW

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2542695354/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Frequent questions about postcode 55487

How hard is the water in Postcode 55487?
TWIST RLP - AA Dillendorf (WW), TW publishes a total hardness of 0.73 mmol/l for the supply zone AA Dillendorf (WW), TW — that corresponds to 4.1 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
How much nitrate is in the drinking water in Postcode 55487?
TWIST RLP - AA Dillendorf (WW), TW publishes a nitrate value of 2.6 mg/L for the supply zone AA Dillendorf (WW), TW. The statutory parametric value is 50 mg/l; the measured value represents 5 % of the parametric value. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Are PFAS detectable in the drinking water in Postcode 55487?
TWIST RLP - AA Dillendorf (WW), TW publishes for the supply zone AA Dillendorf (WW), TW a sum value PFAS-20 of 0 µg/L. The statutory parametric value is 0.1 µg/l; the measured value represents 0 % of the parametric value. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Who supplies the drinking water in Postcode 55487?
TWIST RLP - AA Dillendorf (WW), TW. The values shown here come from the supply zone AA Dillendorf (WW), TW and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.