Drinking water in 54332
For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 2 underneath.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
ZHB Albachtal (WW), TW
TWIST RLP - ZHB Albachtal (WW), TWAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of PFAS | 0 µg/L | 0.1 µg/l | 0 % | Mean · ZHB Albachtal (WW), TW |
| Nitrate | < 2.5 mg/L below limit of quantification | 50 mg/l | < 5 % * | Mean · ZHB Albachtal (WW), TW |
| Lead | < 0.3 µg/L below limit of quantification | 10 µg/l | < 3 % * | Mean · ZHB Albachtal (WW), TW |
| Escherichia coli (E. coli) | 0 Anzahl/100ml | 0/100 ml | — | Mean · ZHB Albachtal (WW), TW |
| Sulphate | 78 mg/L | 250 mg/l | 31 % | Mean · ZHB Albachtal (WW), TW |
| Sodium | 12.1 mg/L | 200 mg/l | 6 % | Mean · ZHB Albachtal (WW), TW |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (31 — most recent value per parameter)
Microbiology (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 Anzahl/100ml | 0/100 ml | — | Mean · ZHB Albachtal (WW), TW |
Chemical parameters (14)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Antimony | < 0.3 µg/L below limit of quantification | 5 µg/l | < 6 % * | Mean · ZHB Albachtal (WW), TW |
| Arsenic | 3.9 µg/L | 10 µg/l | 39 % | Mean · ZHB Albachtal (WW), TW |
| Boron | 0.07 mg/L | 1 mg/l | 7 % | Mean · ZHB Albachtal (WW), TW |
| Cadmium | < 0.2 µg/L below limit of quantification | 3 µg/l | < 7 % * | Mean · ZHB Albachtal (WW), TW |
| Copper | < 0.002 mg/L below limit of quantification | 2 mg/l | < 0.1 % * | Mean · ZHB Albachtal (WW), TW |
| Cyanide | < 0.005 mg/L below limit of quantification | 50 µg/l | < 10 % * | Mean · ZHB Albachtal (WW), TW |
| Fluoride | 0.18 mg/L | 1.5 mg/l | 12 % | Mean · ZHB Albachtal (WW), TW |
| Lead | < 0.3 µg/L below limit of quantification | 10 µg/l | < 3 % * | Mean · ZHB Albachtal (WW), TW |
| Mercury | < 0.05 µg/L below limit of quantification | 1 µg/l | < 5 % * | Mean · ZHB Albachtal (WW), TW |
| Nickel | < 0.5 µg/L below limit of quantification | 20 µg/l | < 3 % * | Mean · ZHB Albachtal (WW), TW |
| Nitrate | < 2.5 mg/L below limit of quantification | 50 mg/l | < 5 % * | Mean · ZHB Albachtal (WW), TW |
| Nitrite | < 0.01 mg/L below limit of quantification | 0.5 mg/l | < 2 % * | Mean · ZHB Albachtal (WW), TW |
| Selenium | < 0.6 µg/L below limit of quantification | 10 µg/l | < 6 % * | Mean · ZHB Albachtal (WW), TW |
| Uranium | 0.3 µg/L | 10 µg/l | 3 % | Mean · ZHB Albachtal (WW), TW |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of PFAS | 0 µg/L | 0.1 µg/l | 0 % | Mean · ZHB Albachtal (WW), TW |
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | 0.016 mg/L | 0.2 mg/l | 8 % | Mean · ZHB Albachtal (WW), TW |
| Ammonium | < 0.05 mg/L below limit of quantification | 0.5 mg/l | < 10 % * | Mean · ZHB Albachtal (WW), TW |
| Chloride | 27 mg/L | 250 mg/l | 11 % | Mean · ZHB Albachtal (WW), TW |
| Coliform bacteria | 0 Anzahl/100ml | 0/100 ml | — | Mean · ZHB Albachtal (WW), TW |
| Iron | < 0.005 mg/L below limit of quantification | 0.2 mg/l | < 3 % * | Mean · ZHB Albachtal (WW), TW |
| Manganese | < 0.002 mg/L below limit of quantification | 50 µg/l | < 4 % * | Mean · ZHB Albachtal (WW), TW |
| pH | 7.94 - | 6,5–9,5 | — | Mean · ZHB Albachtal (WW), TW |
| Sodium | 12.1 mg/L | 200 mg/l | 6 % | Mean · ZHB Albachtal (WW), TW |
| Sulphate | 78 mg/L | 250 mg/l | 31 % | Mean · ZHB Albachtal (WW), TW |
| Temperature | 10.9 °C | — | — | Mean · ZHB Albachtal (WW), TW |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 19.3 mg/L | — | — | Mean · ZHB Albachtal (WW), TW |
| Magnesium | 38.2 mg/L | — | — | Mean · ZHB Albachtal (WW), TW |
| Potassium | 5.9 mg/L | — | — | Mean · ZHB Albachtal (WW), TW |
| Total hardness | 2.17 mmol/l | — | — | Mean · ZHB Albachtal (WW), TW |
| Zinc | 0.006 mg/L | — | — | Mean · ZHB Albachtal (WW), TW |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Show 2 more supply zones in this postcode
Hochbehälter Mannebach
Saar-Mosel Werke Konz AöR (SMW Konz)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7,3 mg/l | 50 mg/l | 15 % | Single value · Hochbehälter Mannebach |
| Sulphate | 24 mg/l | 250 mg/l | 10 % | Single value · Hochbehälter Mannebach |
| Sodium | 6,4 mg/l | 200 mg/l | 3 % | Single value · Hochbehälter Mannebach |
Show all recorded parameters (14 — most recent value per parameter)
Chemical parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Fluoride | 0,15 mg/l | 1.5 mg/l | 10 % | Single value · Hochbehälter Mannebach |
| Mercury | <0,1 mg/l below limit of quantification | 1 µg/l | cannot be assessed — the limit of quantification of the measurement is above the parametric value | Single value · Hochbehälter Mannebach |
| Nitrate | 7,3 mg/l | 50 mg/l | 15 % | Single value · Hochbehälter Mannebach |
| Nitrite | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value · Hochbehälter Mannebach |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 13 mg/l | 250 mg/l | 5 % | Single value · Hochbehälter Mannebach |
| Conductivity (25 °C) | 520,1 µS/cm | 2,790 µS/cm | — | Single value · Hochbehälter Mannebach |
| Iron | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value · Hochbehälter Mannebach |
| pH | 7,34 – | 6,5–9,5 | — | Single value · Hochbehälter Mannebach |
| Sodium | 6,4 mg/l | 200 mg/l | 3 % | Single value · Hochbehälter Mannebach |
| Sulphate | 24 mg/l | 250 mg/l | 10 % | Single value · Hochbehälter Mannebach |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 59,0 mg/l | — | — | Single value · Hochbehälter Mannebach |
| Magnesium | 29,6 mg/l | — | — | Single value · Hochbehälter Mannebach |
| Potassium | 2,3 mg/l | — | — | Single value · Hochbehälter Mannebach |
| Total hardness | 2,69 mmol/l | — | — | Single value · Hochbehälter Mannebach |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Hochbehälter Wasserliesch
Saar-Mosel Werke Konz AöR (SMW Konz)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7,7 mg/l | 50 mg/l | 15 % | Single value · Hochbehälter Wasserliesch |
| Sulphate | 76 mg/l | 250 mg/l | 30 % | Single value · Hochbehälter Wasserliesch |
| Sodium | 12,1 mg/l | 200 mg/l | 6 % | Single value · Hochbehälter Wasserliesch |
Show all recorded parameters (14 — most recent value per parameter)
Chemical parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Fluoride | 0,16 mg/l | 1.5 mg/l | 11 % | Single value · Hochbehälter Wasserliesch |
| Mercury | <0,1 mg/l below limit of quantification | 1 µg/l | cannot be assessed — the limit of quantification of the measurement is above the parametric value | Single value · Hochbehälter Wasserliesch |
| Nitrate | 7,7 mg/l | 50 mg/l | 15 % | Single value · Hochbehälter Wasserliesch |
| Nitrite | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value · Hochbehälter Wasserliesch |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 27 mg/l | 250 mg/l | 11 % | Single value · Hochbehälter Wasserliesch |
| Conductivity (25 °C) | 479,9 µS/cm | 2,790 µS/cm | — | Single value · Hochbehälter Wasserliesch |
| Iron | 0,005 mg/l | 0.2 mg/l | 3 % | Single value · Hochbehälter Wasserliesch |
| pH | 7,71 – | 6,5–9,5 | — | Single value · Hochbehälter Wasserliesch |
| Sodium | 12,1 mg/l | 200 mg/l | 6 % | Single value · Hochbehälter Wasserliesch |
| Sulphate | 76 mg/l | 250 mg/l | 30 % | Single value · Hochbehälter Wasserliesch |
Further parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 26,0 mg/l | — | — | Single value · Hochbehälter Wasserliesch |
| Magnesium | 30,1 mg/l | — | — | Single value · Hochbehälter Wasserliesch |
| Potassium | 5,4 mg/l | — | — | Single value · Hochbehälter Wasserliesch |
| Total hardness | 2,19 mmol/l | — | — | Single value · Hochbehälter Wasserliesch |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 54332
- How hard is the water in Postcode 54332?
- TWIST RLP - ZHB Albachtal (WW), TW publishes a total hardness of 2.17 mmol/l for the supply zone ZHB Albachtal (WW), TW — that corresponds to 12.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
- How much nitrate is in the drinking water in Postcode 54332?
- TWIST RLP - ZHB Albachtal (WW), TW publishes a nitrate value of < 2.5 mg/L for the supply zone ZHB Albachtal (WW), TW. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: Publication by the water supplier, retrieved on 13/07/2026.
- Are PFAS detectable in the drinking water in Postcode 54332?
- TWIST RLP - ZHB Albachtal (WW), TW publishes for the supply zone ZHB Albachtal (WW), TW a sum value PFAS-20 of 0 µg/L. The statutory parametric value is 0.1 µg/l; the measured value represents 0 % of the parametric value. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Publication by the water supplier, retrieved on 13/07/2026.
- Who supplies the drinking water in Postcode 54332?
- TWIST RLP - ZHB Albachtal (WW), TW. The values shown here come from the supply zone ZHB Albachtal (WW), TW and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.