Skip to content
maunawai.info

Drinking water in 53913

For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 5 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

0496, Heimerzheim Aufbereitung, 53913 Swisttal

e-regio GmbH & Co. KG

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values 0496, Heimerzheim Aufbereitung, 53913 Swisttal
Parameter Value Parametric value Share of the parametric value Reference
Nitrate < 1 mg/L
below limit of quantification
50 mg/l
< 2 % *
Single value
Lead < 0,002 mg/L
below limit of quantification
10 µg/l
< 20 % *
Single value
Sulphate 110 mg/L 250 mg/l
44 %
Single value
Sodium 18,0 mg/L 200 mg/l
9 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (87 — most recent value per parameter)

Chemical parameters (68)

Chemical parameters – 0496, Heimerzheim Aufbereitung, 53913 Swisttal
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,0002 mg/L
below limit of quantification
3 µg/l
< 7 % *
Single value
2,6-Dichlorobenzamide (BAM) < 0,000025 mg/L
below limit of quantification
Single value
Acrylamide < 0,000025 mg/L
below limit of quantification
0.1 µg/l
< 25 % *
Single value
AMPA < 0,00005 mg/L
below limit of quantification
Single value
Antimony < 0,001 mg/L
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic < 0,001 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value
Atrazine < 0,000025 mg/L
below limit of quantification
Single value
Benzene < 0,0005 mg/L
below limit of quantification
1 µg/l
< 50 % *
Single value
Benzo(a)pyrene < 0,000005 mg/L
below limit of quantification
10 ng/l
< 50 % *
Single value
Benzo(b)fluoranthene < 0,000005 mg/L
below limit of quantification
Single value
Benzo(ghi)perylene < 0,000005 mg/L
below limit of quantification
Single value
Benzo(k)fluoranthene < 0,000005 mg/L
below limit of quantification
Single value
Bisphenol A < 0,0001 mg/L
below limit of quantification
2.5 µg/l
< 4 % *
Single value
Boron 0,034 mg/L 1 mg/l
3 %
Single value
Bromacil < 0,000025 mg/L
below limit of quantification
Single value
Bromate < 0,005 mg/L
below limit of quantification
10 µg/l
< 50 % *
Single value
Bromodichloromethane < 0,0005 mg/L
below limit of quantification
Single value
Cadmium < 0,0005 mg/L
below limit of quantification
3 µg/l
< 17 % *
Single value
Carbofuran < 0,000025 mg/L
below limit of quantification
Single value
Chlorate < 0,02 mg/L
below limit of quantification
70 µg/l
< 29 % *
Single value
Chloridazon < 0,000025 mg/L
below limit of quantification
Single value
Chlorite 0,06 mg/L 0.2 mg/l
30 %
Single value
Chlorotoluron < 0,000025 mg/L
below limit of quantification
Single value
Chromium < 0,002 mg/L
below limit of quantification
25 µg/l
< 8 % *
Single value
Copper < 0,01 mg/L
below limit of quantification
2 mg/l
< 0.5 % *
Single value
Cyanazine < 0,000025 mg/L
below limit of quantification
Single value
Cyanide < 0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value
Dibromochloromethane < 0,0005 mg/L
below limit of quantification
Single value
Diuron < 0,000025 mg/L
below limit of quantification
Single value
Epichlorohydrin < 0,00005 mg/L
below limit of quantification
0.1 µg/l
< 50 % *
Single value
Ethofumesate < 0,000025 mg/L
below limit of quantification
Single value
Fenuron < 0,000025 mg/L
below limit of quantification
Single value
Flufenacet < 0,000025 mg/L
below limit of quantification
Single value
Fluoride < 0,1 mg/L
below limit of quantification
1.5 mg/l
< 7 % *
Single value
Glyphosate < 0,00005 mg/L
below limit of quantification
Single value
Hexazinone < 0,000025 mg/L
below limit of quantification
Single value
Indeno(1,2,3-cd)pyrene < 0,000005 mg/L
below limit of quantification
Single value
Isoproturon < 0,000025 mg/L
below limit of quantification
Single value
Lead < 0,002 mg/L
below limit of quantification
10 µg/l
< 20 % *
Single value
Mercury < 0,0005 mg/L
below limit of quantification
1 µg/l
< 50 % *
Single value
Metalaxyl < 0,000025 mg/L
below limit of quantification
Single value
Metamitron < 0,000025 mg/L
below limit of quantification
Single value
Metazachlor < 0,000025 mg/L
below limit of quantification
Single value
Methabenzthiazuron < 0,000025 mg/L
below limit of quantification
Single value
Metobromuron < 0,000025 mg/L
below limit of quantification
Single value
Metolachlor < 0,000025 mg/L
below limit of quantification
Single value
Metoxuron < 0,000025 mg/L
below limit of quantification
Single value
Metribuzin < 0,000025 mg/L
below limit of quantification
Single value
Monuron < 0,000025 mg/L
below limit of quantification
Single value
Nickel < 0,002 mg/L
below limit of quantification
20 µg/l
< 10 % *
Single value
Nitrate < 1 mg/L
below limit of quantification
50 mg/l
< 2 % *
Single value
Nitrite < 0,02 mg/L
below limit of quantification
0.5 mg/l
< 4 % *
Single value
Polycyclic aromatic hydrocarbons < 0,000005 mg/L
below limit of quantification
0.1 µg/l
< 5 % *
Single value
Prometryn < 0,000025 mg/L
below limit of quantification
Single value
Propazine < 0,000025 mg/L
below limit of quantification
Single value
Propiconazole < 0,000025 mg/L
below limit of quantification
Single value
Selenium < 0,001 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value
Simazine < 0,000025 mg/L
below limit of quantification
Single value
Tebuconazole < 0,000025 mg/L
below limit of quantification
Single value
Terbuthylazine < 0,000025 mg/L
below limit of quantification
Single value
Terbutryn < 0,000025 mg/L
below limit of quantification
Single value
Tetrachloroethene < 0,0002 mg/L
below limit of quantification
Single value
Triadimenol < 0,000025 mg/L
below limit of quantification
Single value
Tribromomethane (bromoform) < 0,0005 mg/L
below limit of quantification
Single value
Trichloroethene < 0,0002 mg/L
below limit of quantification
Single value
Trichloromethane (chloroform) < 0,0005 mg/L
below limit of quantification
Single value
Uranium < 0,0002 mg/L
below limit of quantification
10 µg/l
< 2 % *
Single value
Vinyl chloride < 0,0005 mg/L
below limit of quantification
0.5 µg/l
< 100 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (14)

Indicator parameters – 0496, Heimerzheim Aufbereitung, 53913 Swisttal
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,01 mg/L
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Ammonium < 0,03 mg/L
below limit of quantification
0.5 mg/l
< 6 % *
Single value
Calcite dissolution capacity -8,00 mg/L 5 mg/l CaCO3 Single value
Chloride 49,0 mg/L 250 mg/l
20 %
Single value
Colour < 0,05 1/m
below limit of quantification
0.5 m⁻¹ Single value
Conductivity (25 °C) 619 µS/cm 2,790 µS/cm Single value
Iron < 0,02 mg/L
below limit of quantification
0.2 mg/l
< 10 % *
Single value
Manganese < 0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 7,90 6,5–9,5 Single value
Sodium 18,0 mg/L 200 mg/l
9 %
Single value
Sulphate 110 mg/L 250 mg/l
44 %
Single value
Taste ohne für den Verbraucher annehmbar Single value
Turbidity 0,16 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – 0496, Heimerzheim Aufbereitung, 53913 Swisttal
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,40 mmol/L Single value
Calcium 83,0 mg/L Single value
Hydrogen carbonate 146,40 mg/L Single value
Magnesium 13 mg/L Single value
Potassium 2,50 mg/L Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wasser-eu-sw.com/wp-content/uploads/2025/12/WW-Heimerzheim-Aufbereitung_chemie_07.10.25.pdf · 10.11.2025 · Entnahme am 07.10.2025 um 12:00 Uhr · retrieved on 11/07/2026
Show 5 more supply zones in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
20.8 °dH
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – WW Arloff
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · WW Arloff
Total hardness 20,8 °dH Single value · WW Arloff

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wasser-eu-sw.com/wp-content/uploads/2025/12/20251209_Publikationspflicht-TW-Richtlinie_WES.pdf · Stand: Dezember 2025 · Härtebilder aus Oktober 2025 (Angaben für WW Satzvey aus September 2025) · retrieved on 11/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.6 °dH
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – WW Heimerzheim
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · WW Heimerzheim
Total hardness 14,6 °dH Single value · WW Heimerzheim

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wasser-eu-sw.com/wp-content/uploads/2025/12/20251209_Publikationspflicht-TW-Richtlinie_WES.pdf · Stand: Dezember 2025 · Härtebilder aus Oktober 2025 (Angaben für WW Satzvey aus September 2025) · retrieved on 11/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
12.4 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – WW Ludendorf
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · WW Ludendorf
Total hardness 12,4 °dH Single value · WW Ludendorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wasser-eu-sw.com/wp-content/uploads/2025/12/20251209_Publikationspflicht-TW-Richtlinie_WES.pdf · Stand: Dezember 2025 · Härtebilder aus Oktober 2025 (Angaben für WW Satzvey aus September 2025) · retrieved on 11/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
18.9 °dH
Hardness range hart

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – WW Satzvey (Verbandswasserwerk)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) hart Single value · WW Satzvey (Verbandswasserwerk)
Total hardness 18,9 °dH Single value · WW Satzvey (Verbandswasserwerk)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wasser-eu-sw.com/wp-content/uploads/2025/12/20251209_Publikationspflicht-TW-Richtlinie_WES.pdf · Stand: Dezember 2025 · Härtebilder aus Oktober 2025 (Angaben für WW Satzvey aus September 2025) · retrieved on 11/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Frequent questions about postcode 53913

How much nitrate is in the drinking water in Postcode 53913?
e-regio GmbH & Co. KG publishes a nitrate value of < 1 mg/L for the supply zone 0496, Heimerzheim Aufbereitung, 53913 Swisttal. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: 10.11.2025, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 53913?
e-regio GmbH & Co. KG. The values shown here come from the supply zone 0496, Heimerzheim Aufbereitung, 53913 Swisttal and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.