Skip to content
maunawai.info

Drinking water in 49479

One supply zone, water supplier: Wasserversorgungsverband Tecklenburger Land.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
15.3 °dH
Hardness range hard
Key values Brochterbeck
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS nicht bestimmbar mg/l
not determined
Single value
Nitrate 15 mg/l 50 mg/l
30 %
Single value
Lead 0,001 mg/l 10 µg/l
10 %
Single value
Escherichia coli (E. coli) 0 Anzahl/100 ml 0/100 ml Single value
Sulphate 66 mg/l 250 mg/l
26 %
Single value
Sodium 15 mg/l 200 mg/l
8 %
Single value
Show all recorded parameters (54 — most recent value per parameter)

Microbiology (2)

Microbiology – Brochterbeck
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100 ml 0/100 ml Single value
Intestinal enterococci 0 Anzahl/100 ml 0/100 ml Single value

Chemical parameters (23)

Chemical parameters – Brochterbeck
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0005 mg/l
below limit of quantification
3 µg/l
< 17 % *
Single value
Acrylamide <0,00003 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Single value
Antimony <0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Benzene <0,0003 mg/l
below limit of quantification
1 µg/l
< 30 % *
Single value
Bisphenol A <0,0001 mg/l
below limit of quantification
2.5 µg/l
< 4 % *
Single value
Boron <0,05 mg/l
below limit of quantification
1 mg/l
< 5 % *
Single value
Bromate <0,003 mg/l
below limit of quantification
10 µg/l
< 30 % *
Single value
Cadmium <0,0005 mg/l
below limit of quantification
3 µg/l
< 17 % *
Single value
Chromium <0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper 0,01 mg/l 2 mg/l
0.5 %
Single value
Cyanide <0,01 mg/l
below limit of quantification
50 µg/l
< 20 % *
Single value
Fluoride <1,0 mg/l
below limit of quantification
1.5 mg/l
< 67 % *
Single value
Lead 0,001 mg/l 10 µg/l
10 %
Single value
Mercury <0,0002 mg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Nickel 0,003 mg/l 20 µg/l
15 %
Single value
Nitrate 15 mg/l 50 mg/l
30 %
Single value
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides — Total <0,0005 mg/l
below limit of quantification
0.5 µg/l
< 100 % *
Single value
Polycyclic aromatic hydrocarbons <0,000007 mg/l
below limit of quantification
0.1 µg/l
< 7 % *
Single value
Selenium <0,003 mg/l
below limit of quantification
10 µg/l
< 30 % *
Single value
Tetrachloroethene and Trichloroethene (sum) <0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Uranium 0,001 mg/l 10 µg/l
10 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – Brochterbeck
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS nicht bestimmbar mg/l
not determined
Single value
Sum of PFAS nicht bestimmbar mg/l
not determined
Single value

Indicator parameters (19)

Indicator parameters – Brochterbeck
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,05 mg/l
below limit of quantification
0.2 mg/l
< 25 % *
Single value
Ammonium <0,1 mg/l
below limit of quantification
0.5 mg/l
< 20 % *
Single value
Calcite dissolution capacity -17,36 mg/l CaCO3 5 mg/l CaCO3 Single value
Chloride 30 mg/l 250 mg/l
12 %
Single value
Coliform bacteria 0 Anzahl/100ml 0/100 ml Single value
Colony count 22 °C 0 Anzahl ohne anormale Veränderung Single value
Colony count 36 °C 0 Anzahl ohne anormale Veränderung Single value
Colour 0,26 m-1 0.5 m⁻¹ Single value
Conductivity (25 °C) 612 µS/cm 2,790 µS/cm Single value
Iron <0,05 mg/l
below limit of quantification
0.2 mg/l
< 25 % *
Single value
Manganese <0,01 mg/l
below limit of quantification
50 µg/l
< 20 % *
Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 7,6 pH-Einheiten 6,5–9,5 Single value
Sodium 15 mg/l 200 mg/l
8 %
Single value
Sulphate 66 mg/l 250 mg/l
26 %
Single value
Taste ohne für den Verbraucher annehmbar Single value
Temperature 12,5 °C Single value
Total organic carbon (TOC) 4,1 mg/l ohne anormale Veränderung Single value
Turbidity 0,1 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Brochterbeck
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3,9 mmol/l Single value
Base capacity to pH 8.2 0,56 mmol/l Single value
Calcium 0,57 mmol/l Single value
Carbonate hardness 1,95 mmol/l Single value
Hydrogen carbonate 238 mg/l Single value
Magnesium 0,02 mmol/l Single value
Potassium 0,02 mmol/l Single value
Total hardness 2,72 mmol/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://wtl-wasser.de/wp-content/uploads/2026/01/2026-01-Brochterbeck.pdf · Mittelwerte von Januar 2025 - Dezember 2025 · retrieved on 25/07/2026

Frequent questions about postcode 49479

How hard is the water in Postcode 49479?
Wasserversorgungsverband Tecklenburger Land publishes a total hardness of 2,72 mmol/l for the supply zone Brochterbeck — that corresponds to 15.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 25/07/2026.
How much nitrate is in the drinking water in Postcode 49479?
Wasserversorgungsverband Tecklenburger Land publishes a nitrate value of 15 mg/l for the supply zone Brochterbeck. The statutory parametric value is 50 mg/l; the measured value represents 30 % of the parametric value. Basis: Publication by the water supplier, retrieved on 25/07/2026.
Who supplies the drinking water in Postcode 49479?
Wasserversorgungsverband Tecklenburger Land. The values shown here come from the supply zone Brochterbeck and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.