Skip to content
maunawai.info

Drinking water in 46485

One supply zone, water supplier: Stadtwerke Wesel (Wasserwerk Flüren).

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Wasserversorger (offizieller Durchschnittsmesswert)

Stadtwerke Wesel (Wasserwerk Flüren)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
13.2 °dH
Hardness range medium
Key values Wasserversorger (offizieller Durchschnittsmesswert)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 22.1 mg/l 50 mg/l
44 %
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Lead < 0.001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Sodium 16.1 mg/l 200 mg/l
8 %
Mean · Wasserversorger (offizieller Durchschnittsmesswert)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Wasserversorger (offizieller Durchschnittsmesswert)
Parameter Value Parametric value Share of the parametric value Reference
Copper < 0.05 mg/l
below limit of quantification
2 mg/l
< 3 % *
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Lead < 0.001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Nickel < 0.002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Mean · Wasserversorger (offizieller Durchschnittsmesswert)
Nitrate 22.1 mg/l 50 mg/l
44 %
Mean · Wasserversorger (offizieller Durchschnittsmesswert)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Wasserversorger (offizieller Durchschnittsmesswert)
Parameter Value Parametric value Share of the parametric value Reference
Sodium 16.1 mg/l 200 mg/l
8 %
Mean · Wasserversorger (offizieller Durchschnittsmesswert)

Further parameters (1)

Further parameters – Wasserversorger (offizieller Durchschnittsmesswert)
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 13.2 °dH Mean · Wasserversorger (offizieller Durchschnittsmesswert)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://xn--wasserqualitt-mfb.ivario.com/wesel.php · retrieved on 13/07/2026

Frequent questions about postcode 46485

How hard is the water in Postcode 46485?
Stadtwerke Wesel (Wasserwerk Flüren) publishes a total hardness of 13.2 °dH for the supply zone Wasserversorger (offizieller Durchschnittsmesswert) (hardness range medium). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
How much nitrate is in the drinking water in Postcode 46485?
Stadtwerke Wesel (Wasserwerk Flüren) publishes a nitrate value of 22.1 mg/l for the supply zone Wasserversorger (offizieller Durchschnittsmesswert). The statutory parametric value is 50 mg/l; the measured value represents 44 % of the parametric value. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Who supplies the drinking water in Postcode 46485?
Stadtwerke Wesel (Wasserwerk Flüren). The values shown here come from the supply zone Wasserversorger (offizieller Durchschnittsmesswert) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.