Skip to content
maunawai.info

Drinking water in 39444

For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 11 underneath. The water supplier publishes 10 further local networks that cannot be clearly assigned to this postcode — they are listed on the water supplier page.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER

Wasser- und Abwasserzweckverband "Bode-Wipper" Staßfurt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14.3 °dH
Hardness range hart
Key values Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Nitrate <1,0 mg/l
below limit of quantification
 50 mg/l
< 2 % *
Mean
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml — Mean
Sulphate 110 mg/l 250 mg/l
44 %
Mean
Sodium 0,985 mmol/l 200 mg/l — Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (92 — most recent value per parameter)

Microbiology (2)

Microbiology – Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml — Mean
Intestinal enterococci 0 KBE/100 ml 0/100 ml — Mean

Chemical parameters (60)

Chemical parameters – Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,00050 mg/l
below limit of quantification
 3 µg/l
< 17 % *
Mean
Antimony <0,0010 mg/l
below limit of quantification
 5 µg/l
< 20 % *
Mean
Arsenic <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Atrazine <0,000030 mg/l
below limit of quantification
 — — Mean
Azoxystrobin <0,000030 mg/l
below limit of quantification
 — — Mean
Bentazone <0,000030 mg/l
below limit of quantification
 — — Mean
Benzene <0,00030 mg/l
below limit of quantification
 1 µg/l
< 30 % *
Mean
Benzo(a)pyrene <0,0000025 mg/l
below limit of quantification
 10 ng/l
< 25 % *
Mean
Benzo(b)fluoranthene <0,000025 mg/l
below limit of quantification
 — — Mean
Benzo(ghi)perylene <0,000025 mg/l
below limit of quantification
 — — Mean
Benzo(k)fluoranthene <0,000025 mg/l
below limit of quantification
 — — Mean
Bisphenol A <0,00018 mg/l
below limit of quantification
 2.5 µg/l
< 7 % *
Mean
Boron <0,100 mg/l
below limit of quantification
 1 mg/l
< 10 % *
Mean
Bromacil <0,000030 mg/l
below limit of quantification
 — — Mean
Bromate <0,002 mg/l
below limit of quantification
 10 µg/l
< 20 % *
Mean
Bromoxynil <0,000030 mg/l
below limit of quantification
 — — Mean
Cadmium <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean
Chloridazon <0,000030 mg/l
below limit of quantification
 — — Mean
Chlorotoluron <0,000030 mg/l
below limit of quantification
 — — Mean
Chromium <0,000068 mg/l
below limit of quantification
 25 µg/l
< 0.3 % *
Mean
Copper <0,0020 mg/l
below limit of quantification
 2 mg/l
< 0.1 % *
Mean
Cyanide <0,010 mg/l
below limit of quantification
 50 µg/l
< 20 % *
Mean
Dichlorprop <0,000030 mg/l
below limit of quantification
 — — Mean
Dimefuron <0,000030 mg/l
below limit of quantification
 — — Mean
Dimethachlor <0,000030 mg/l
below limit of quantification
 — — Mean
Dimethenamid <0,000030 mg/l
below limit of quantification
 — — Mean
Dimethoate <0,000030 mg/l
below limit of quantification
 — — Mean
Diuron <0,000030 mg/l
below limit of quantification
 — — Mean
Ethidimuron <0,000030 mg/l
below limit of quantification
 — — Mean
Fluoride <0,20 mg/l
below limit of quantification
 1.5 mg/l
< 13 % *
Mean
Hexazinone <0,000030 mg/l
below limit of quantification
 — — Mean
Indeno(1,2,3-cd)pyrene <0,000025 mg/l
below limit of quantification
 — — Mean
Isoproturon <0,000030 mg/l
below limit of quantification
 — — Mean
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Lenacil <0,000030 mg/l
below limit of quantification
 — — Mean
MCPA <0,000030 mg/l
below limit of quantification
 — — Mean
Mecoprop <0,000030 mg/l
below limit of quantification
 — — Mean
Mercury <0,0001 mg/l
below limit of quantification
 1 µg/l
< 10 % *
Mean
Metamitron <0,000030 mg/l
below limit of quantification
 — — Mean
Metazachlor 0,000208 mg/l — — Mean
Methabenzthiazuron <0,000030 mg/l
below limit of quantification
 — — Mean
Metolachlor 0,000062 mg/l — — Mean
Metoxuron <0,000030 mg/l
below limit of quantification
 — — Mean
Metribuzin <0,000030 mg/l
below limit of quantification
 — — Mean
Nickel <0,0020 mg/l
below limit of quantification
 20 µg/l
< 10 % *
Mean
Nitrate <1,0 mg/l
below limit of quantification
 50 mg/l
< 2 % *
Mean
Nitrite <0,010 mg/l
below limit of quantification
 0.5 mg/l
< 2 % *
Mean
Prometryn <0,000030 mg/l
below limit of quantification
 — — Mean
Propazine <0,000030 mg/l
below limit of quantification
 — — Mean
Quinmerac <0,000030 mg/l
below limit of quantification
 — — Mean
Sebuthylazine <0,000030 mg/l
below limit of quantification
 — — Mean
Selenium <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Simazine <0,000030 mg/l
below limit of quantification
 — — Mean
Tebuconazole <0,000030 mg/l
below limit of quantification
 — — Mean
Terbuthylazine <0,000030 mg/l
below limit of quantification
 — — Mean
Tetrachloroethene <0,0010 mg/l
below limit of quantification
 — — Mean
Thiacloprid <0,000030 mg/l
below limit of quantification
 — — Mean
Trichloroethene <0,0010 mg/l
below limit of quantification
 — — Mean
Uranium <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Vinyl chloride <0,00015 mg/l
below limit of quantification
 0.5 µg/l
< 30 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Desphenyl-chloridazon <0,000038 mg/l
below limit of quantification
 — — Mean
Methyl-desphenyl-chloridazon <0,000030 mg/l
below limit of quantification
 — — Mean

Indicator parameters (20)

Indicator parameters – Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,020 mg/l
below limit of quantification
 0.2 mg/l
< 10 % *
Mean
Ammonium <0,01 mg/l
below limit of quantification
 0.5 mg/l
< 2 % *
Mean
Calcite dissolution capacity -2 mg/l 5 mg/l CaCO3 — Mean
Chloride 41 mg/l 250 mg/l
16 %
Mean
Coliform bacteria 0 KBE/100 ml 0/100 ml — Mean
Colony count 22 °C 0 KBE/ml ohne anormale Veränderung — Mean
Colony count 36 °C 0 KBE/ml ohne anormale Veränderung — Mean
Colour ohne ohne 0.5 m⁻¹ — Mean
Conductivity (25 °C) 601 µS/cm 2,790 µS/cm — Mean
Iron <0,013 mg/l
below limit of quantification
 0.2 mg/l
< 6 % *
Mean
Manganese <0,002 mg/l
below limit of quantification
 50 µg/l
< 4 % *
Mean
Odour ohne ohne für den Verbraucher annehmbar — Mean
Oxidisability 2,8 mg/l O2 5 mg/l O2 — Mean
pH 7,61 ohne 6,5–9,5 — Mean
Sodium 0,985 mmol/l 200 mg/l — Mean
Sulphate 110 mg/l 250 mg/l
44 %
Mean
Taste ohne ohne für den Verbraucher annehmbar — Mean
Temperature 20,3 °C — — Mean
Total organic carbon (TOC) 4,32 mg/l C ohne anormale Veränderung — Mean
Turbidity 0,24 NTU 1 NTU — Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Calcium 2,28 mmol/l — — Mean
Hardness range (WRMG) hart ohne — — Mean
Magnesium 0,27 mmol/l — — Mean
Oxygen 9,8 mg/l O2 — — Mean
Potassium 0,091 mmol/l — — Mean
Saturation index 0,07 ohne — — Mean
Silicate / silicic acid 13,13 mg/l — — Mean
Total hardness 14,3 °dH — — Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wasser-twm.de/media/uploads/wasserqualitaeten/2025/WW-Colbitz-2025.pdf · 26.01.2026 · Jahresmittelwert 2025 · retrieved on 11/07/2026
Show 11 more supply zones in this postcode

Berkau

MIDEWA Wasserversorgungsgesellschaft in Mitteldeutschland mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.6 °dH
Hardness range hart
Key values Berkau
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6,1 mg/l 50 mg/l
12 %
Mean · Berkau
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Berkau
Sulphate 127 mg/l 250 mg/l
51 %
Mean · Berkau
Sodium 14,5 mg/l 200 mg/l
7 %
Mean · Berkau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (46 — most recent value per parameter)

Microbiology (1)

Microbiology – Berkau
Parameter Value Parametric value Share of the parametric value Reference
Intestinal enterococci 0 n/100 ml 0/100 ml — Mean · Berkau

Chemical parameters (23)

Chemical parameters – Berkau
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean · Berkau
Antimony <0,001 mg/l
below limit of quantification
 5 µg/l
< 20 % *
Mean · Berkau
Arsenic 0,002 mg/l 10 µg/l
20 %
Mean · Berkau
Benzene 0,00026 mg/l 1 µg/l
26 %
Mean · Berkau
Benzo(a)pyrene <0,000003 mg/l
below limit of quantification
 10 ng/l
< 30 % *
Mean · Berkau
Boron <0,001 mg/l
below limit of quantification
 1 mg/l
< 0.1 % *
Mean · Berkau
Bromate <0,003 mg/l
below limit of quantification
 10 µg/l
< 30 % *
Mean · Berkau
Cadmium <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean · Berkau
Chlorate < 0,04 mg/l
below limit of quantification
 70 µg/l
< 57 % *
Mean · Berkau
Chromium <0,0005 mg/l
below limit of quantification
 25 µg/l
< 2 % *
Mean · Berkau
Copper 0,003 mg/l 2 mg/l
0.2 %
Mean · Berkau
Cyanide <0,005 mg/l
below limit of quantification
 50 µg/l
< 10 % *
Mean · Berkau
Fluoride 0,07 mg/l 1.5 mg/l
5 %
Mean · Berkau
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Berkau
Mercury <0,0001 mg/l
below limit of quantification
 1 µg/l
< 10 % *
Mean · Berkau
Nickel <0,002 mg/l
below limit of quantification
 20 µg/l
< 10 % *
Mean · Berkau
Nitrate 6,1 mg/l 50 mg/l
12 %
Mean · Berkau
Nitrite <0,01 mg/l
below limit of quantification
 0.5 mg/l
< 2 % *
Mean · Berkau
Polycyclic aromatic hydrocarbons < 0,000025 mg/l
below limit of quantification
 0.1 µg/l
< 25 % *
Mean · Berkau
Selenium <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Berkau
Tetrachloroethene and Trichloroethene (sum) <0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Berkau
Trihalomethanes — Total < 0,001 mg/l
below limit of quantification
 50 µg/l
< 2 % *
Mean · Berkau
Uranium 0,00085 mg/l 10 µg/l
9 %
Mean · Berkau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (14)

Indicator parameters – Berkau
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,004 mg/l
below limit of quantification
 0.2 mg/l
< 2 % *
Mean · Berkau
Ammonium <0,05 mg/l
below limit of quantification
 0.5 mg/l
< 10 % *
Mean · Berkau
Chloride 51 mg/l 250 mg/l
20 %
Mean · Berkau
Coliform bacteria 0 n/100 ml 0/100 ml — Mean · Berkau
Colony count 36 °C 0 n/ml ohne anormale Veränderung — Mean · Berkau
Colour <0,1 m-1
below limit of quantification
 0.5 m⁻¹ — Mean · Berkau
Conductivity (25 °C) 778 µS/cm 2,790 µS/cm — Mean · Berkau
Iron 0,022 mg/l 0.2 mg/l
11 %
Mean · Berkau
Manganese <0,005 mg/l
below limit of quantification
 50 µg/l
< 10 % *
Mean · Berkau
pH 7,13 - 6,5–9,5 — Mean · Berkau
Sodium 14,5 mg/l 200 mg/l
7 %
Mean · Berkau
Sulphate 127 mg/l 250 mg/l
51 %
Mean · Berkau
Total organic carbon (TOC) 0,62 mg/l ohne anormale Veränderung — Mean · Berkau
Turbidity 0,27 NTU 1 NTU — Mean · Berkau

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Berkau
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3,48 mmol/l — — Mean · Berkau
Calcium 110,8 mg/l — — Mean · Berkau
Carbonate hardness 9,8 °dH — — Mean · Berkau
Hardness range (WRMG) hart - — — Mean · Berkau
Magnesium 13 mg/l — — Mean · Berkau
Potassium 10,65 mg/l — — Mean · Berkau
Silicate / silicic acid 11,77 mg/l — — Mean · Berkau
Total hardness 3,32 mmol/l — — Mean · Berkau

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.midewa.de/fileadmin/user_upload/Trinkwasserwerte_erweiterte/Analysen_WW_2023_MIDEWA_.pdf · Mittelwerte Januar bis Dezember 2023 · retrieved on 11/07/2026

Klebitz

MIDEWA Wasserversorgungsgesellschaft in Mitteldeutschland mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
22.4 °dH
Hardness range hart
Key values Klebitz
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9,1 mg/l 50 mg/l
18 %
Mean · Klebitz
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Klebitz
Sulphate 120 mg/l 250 mg/l
48 %
Mean · Klebitz
Sodium 13,8 mg/l 200 mg/l
7 %
Mean · Klebitz

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (46 — most recent value per parameter)

Microbiology (1)

Microbiology – Klebitz
Parameter Value Parametric value Share of the parametric value Reference
Intestinal enterococci 0 n/100 ml 0/100 ml — Mean · Klebitz

Chemical parameters (23)

Chemical parameters – Klebitz
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean · Klebitz
Antimony <0,001 mg/l
below limit of quantification
 5 µg/l
< 20 % *
Mean · Klebitz
Arsenic 0,002 mg/l 10 µg/l
20 %
Mean · Klebitz
Benzene <0,00025 mg/l
below limit of quantification
 1 µg/l
< 25 % *
Mean · Klebitz
Benzo(a)pyrene <0,000003 mg/l
below limit of quantification
 10 ng/l
< 30 % *
Mean · Klebitz
Boron 0,023 mg/l 1 mg/l
2 %
Mean · Klebitz
Bromate <0,003 mg/l
below limit of quantification
 10 µg/l
< 30 % *
Mean · Klebitz
Cadmium <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean · Klebitz
Chlorate < 0,02 mg/l
below limit of quantification
 70 µg/l
< 29 % *
Mean · Klebitz
Chromium <0,0005 mg/l
below limit of quantification
 25 µg/l
< 2 % *
Mean · Klebitz
Copper 0,009 mg/l 2 mg/l
0.4 %
Mean · Klebitz
Cyanide <0,005 mg/l
below limit of quantification
 50 µg/l
< 10 % *
Mean · Klebitz
Fluoride 0,20 mg/l 1.5 mg/l
13 %
Mean · Klebitz
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Klebitz
Mercury <0,0001 mg/l
below limit of quantification
 1 µg/l
< 10 % *
Mean · Klebitz
Nickel <0,002 mg/l
below limit of quantification
 20 µg/l
< 10 % *
Mean · Klebitz
Nitrate 9,1 mg/l 50 mg/l
18 %
Mean · Klebitz
Nitrite <0,01 mg/l
below limit of quantification
 0.5 mg/l
< 2 % *
Mean · Klebitz
Polycyclic aromatic hydrocarbons < 0,000025 mg/l
below limit of quantification
 0.1 µg/l
< 25 % *
Mean · Klebitz
Selenium 0,004 mg/l 10 µg/l
40 %
Mean · Klebitz
Tetrachloroethene and Trichloroethene (sum) <0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Klebitz
Trihalomethanes — Total < 0,001 mg/l
below limit of quantification
 50 µg/l
< 2 % *
Mean · Klebitz
Uranium 0,0016 mg/l 10 µg/l
16 %
Mean · Klebitz

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (14)

Indicator parameters – Klebitz
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,028 mg/l 0.2 mg/l
14 %
Mean · Klebitz
Ammonium <0,05 mg/l
below limit of quantification
 0.5 mg/l
< 10 % *
Mean · Klebitz
Chloride 34 mg/l 250 mg/l
14 %
Mean · Klebitz
Coliform bacteria 0 n/100 ml 0/100 ml — Mean · Klebitz
Colony count 36 °C 0 n/ml ohne anormale Veränderung — Mean · Klebitz
Colour <0,1 m-1
below limit of quantification
 0.5 m⁻¹ — Mean · Klebitz
Conductivity (25 °C) 805 µS/cm 2,790 µS/cm — Mean · Klebitz
Iron 0,025 mg/l 0.2 mg/l
13 %
Mean · Klebitz
Manganese <0,005 mg/l
below limit of quantification
 50 µg/l
< 10 % *
Mean · Klebitz
pH 7,86 - 6,5–9,5 — Mean · Klebitz
Sodium 13,8 mg/l 200 mg/l
7 %
Mean · Klebitz
Sulphate 120 mg/l 250 mg/l
48 %
Mean · Klebitz
Total organic carbon (TOC) 1,45 mg/l ohne anormale Veränderung — Mean · Klebitz
Turbidity 0,25 NTU 1 NTU — Mean · Klebitz

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Klebitz
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 5,16 mmol/l — — Mean · Klebitz
Calcium 134 mg/l — — Mean · Klebitz
Carbonate hardness 14,5 °dH — — Mean · Klebitz
Hardness range (WRMG) hart - — — Mean · Klebitz
Magnesium 15,9 mg/l — — Mean · Klebitz
Potassium 2,08 mg/l — — Mean · Klebitz
Silicate / silicic acid 15,08 mg/l — — Mean · Klebitz
Total hardness 3,99 mmol/l — — Mean · Klebitz

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.midewa.de/fileadmin/user_upload/Trinkwasserwerte_erweiterte/Analysen_WW_2023_MIDEWA_.pdf · Mittelwerte Januar bis Dezember 2023 · retrieved on 11/07/2026

Köthen-Süd

MIDEWA Wasserversorgungsgesellschaft in Mitteldeutschland mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
21.3 °dH
Hardness range hart
Key values Köthen-Süd
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15 mg/l 50 mg/l
30 %
Mean · Köthen-Süd
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Köthen-Süd
Sulphate 195 mg/l 250 mg/l
78 %
Mean · Köthen-Süd
Sodium 20,9 mg/l 200 mg/l
10 %
Mean · Köthen-Süd

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (46 — most recent value per parameter)

Microbiology (1)

Microbiology – Köthen-Süd
Parameter Value Parametric value Share of the parametric value Reference
Intestinal enterococci 0 n/100 ml 0/100 ml — Mean · Köthen-Süd

Chemical parameters (23)

Chemical parameters – Köthen-Süd
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean · Köthen-Süd
Antimony <0,001 mg/l
below limit of quantification
 5 µg/l
< 20 % *
Mean · Köthen-Süd
Arsenic 0,0012 mg/l 10 µg/l
12 %
Mean · Köthen-Süd
Benzene <0,00025 mg/l
below limit of quantification
 1 µg/l
< 25 % *
Mean · Köthen-Süd
Benzo(a)pyrene <0,000003 mg/l
below limit of quantification
 10 ng/l
< 30 % *
Mean · Köthen-Süd
Boron 0,038 mg/l 1 mg/l
4 %
Mean · Köthen-Süd
Bromate <0,003 mg/l
below limit of quantification
 10 µg/l
< 30 % *
Mean · Köthen-Süd
Cadmium <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean · Köthen-Süd
Chlorate 0,04 mg/l 70 µg/l
57 %
Mean · Köthen-Süd
Chromium <0,0005 mg/l
below limit of quantification
 25 µg/l
< 2 % *
Mean · Köthen-Süd
Copper <0,003 mg/l
below limit of quantification
 2 mg/l
< 0.2 % *
Mean · Köthen-Süd
Cyanide <0,005 mg/l
below limit of quantification
 50 µg/l
< 10 % *
Mean · Köthen-Süd
Fluoride 0,15 mg/l 1.5 mg/l
10 %
Mean · Köthen-Süd
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Köthen-Süd
Mercury <0,0001 mg/l
below limit of quantification
 1 µg/l
< 10 % *
Mean · Köthen-Süd
Nickel <0,002 mg/l
below limit of quantification
 20 µg/l
< 10 % *
Mean · Köthen-Süd
Nitrate 15 mg/l 50 mg/l
30 %
Mean · Köthen-Süd
Nitrite <0,01 mg/l
below limit of quantification
 0.5 mg/l
< 2 % *
Mean · Köthen-Süd
Polycyclic aromatic hydrocarbons <0,000025 mg/l
below limit of quantification
 0.1 µg/l
< 25 % *
Mean · Köthen-Süd
Selenium < 0,002 mg/l
below limit of quantification
 10 µg/l
< 20 % *
Mean · Köthen-Süd
Tetrachloroethene and Trichloroethene (sum) <0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Köthen-Süd
Trihalomethanes — Total 0,017 mg/l 50 µg/l
34 %
Mean · Köthen-Süd
Uranium 0,00438 mg/l 10 µg/l
44 %
Mean · Köthen-Süd

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (14)

Indicator parameters – Köthen-Süd
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,026 mg/l 0.2 mg/l
13 %
Mean · Köthen-Süd
Ammonium <0,05 mg/l
below limit of quantification
 0.5 mg/l
< 10 % *
Mean · Köthen-Süd
Chloride 48 mg/l 250 mg/l
19 %
Mean · Köthen-Süd
Coliform bacteria 0 n/100 ml 0/100 ml — Mean · Köthen-Süd
Colony count 36 °C 0 n/ml ohne anormale Veränderung — Mean · Köthen-Süd
Colour <0,1 m-1
below limit of quantification
 0.5 m⁻¹ — Mean · Köthen-Süd
Conductivity (25 °C) 813 µS/cm 2,790 µS/cm — Mean · Köthen-Süd
Iron 0,038 mg/l 0.2 mg/l
19 %
Mean · Köthen-Süd
Manganese <0,005 mg/l
below limit of quantification
 50 µg/l
< 10 % *
Mean · Köthen-Süd
pH 7,49 - 6,5–9,5 — Mean · Köthen-Süd
Sodium 20,9 mg/l 200 mg/l
10 %
Mean · Köthen-Süd
Sulphate 195 mg/l 250 mg/l
78 %
Mean · Köthen-Süd
Total organic carbon (TOC) 2,79 mg/l ohne anormale Veränderung — Mean · Köthen-Süd
Turbidity 0,25 NTU 1 NTU — Mean · Köthen-Süd

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Köthen-Süd
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,73 mmol/l — — Mean · Köthen-Süd
Calcium 109,2 mg/l — — Mean · Köthen-Süd
Carbonate hardness 7,8 °dH — — Mean · Köthen-Süd
Hardness range (WRMG) hart - — — Mean · Köthen-Süd
Magnesium 22,7 mg/l — — Mean · Köthen-Süd
Potassium 2,46 mg/l — — Mean · Köthen-Süd
Silicate / silicic acid 9,51 mg/l — — Mean · Köthen-Süd
Total hardness 3,8 mmol/l — — Mean · Köthen-Süd

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.midewa.de/fileadmin/user_upload/Trinkwasserwerte_erweiterte/Analysen_WW_2023_MIDEWA_.pdf · Mittelwerte Januar bis Dezember 2023 · retrieved on 11/07/2026

Versorgungsbereich Wasserwerk Colbitz

Wasser- und Abwasserzweckverband "Bode-Wipper" Staßfurt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Versorgungsbereich Wasserwerk Colbitz
Parameter Value Parametric value Share of the parametric value Reference
Nitrate <1,0 mg/l
below limit of quantification
 50 mg/l
< 2 % *
Mean
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml — Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (65 — most recent value per parameter)

Microbiology (2)

Microbiology – Versorgungsbereich Wasserwerk Colbitz
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml — Mean
Intestinal enterococci 0 KBE/100 ml 0/100 ml — Mean

Chemical parameters (61)

Chemical parameters – Versorgungsbereich Wasserwerk Colbitz
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,00050 mg/l
below limit of quantification
 3 µg/l
< 17 % *
Mean
Ametryn <0,000030 mg/l
below limit of quantification
 — — Mean
Antimony <0,0010 mg/l
below limit of quantification
 5 µg/l
< 20 % *
Mean
Arsenic <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Atrazine <0,000030 mg/l
below limit of quantification
 — — Mean
Azoxystrobin <0,000030 mg/l
below limit of quantification
 — — Mean
Bentazone <0,000030 mg/l
below limit of quantification
 — — Mean
Benzene <0,00030 mg/l
below limit of quantification
 1 µg/l
< 30 % *
Mean
Benzo(a)pyrene <0,0000025 mg/l
below limit of quantification
 10 ng/l
< 25 % *
Mean
Benzo(b)fluoranthene <0,000025 mg/l
below limit of quantification
 — — Mean
Benzo(ghi)perylene <0,000025 mg/l
below limit of quantification
 — — Mean
Benzo(k)fluoranthene <0,000025 mg/l
below limit of quantification
 — — Mean
Bisphenol A <0,00018 mg/l
below limit of quantification
 2.5 µg/l
< 7 % *
Mean
Boron <0,100 mg/l
below limit of quantification
 1 mg/l
< 10 % *
Mean
Bromacil <0,000030 mg/l
below limit of quantification
 — — Mean
Bromate <0,002 mg/l
below limit of quantification
 10 µg/l
< 20 % *
Mean
Bromoxynil <0,000030 mg/l
below limit of quantification
 — — Mean
Cadmium <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean
Chloridazon <0,000030 mg/l
below limit of quantification
 — — Mean
Chlorotoluron <0,000030 mg/l
below limit of quantification
 — — Mean
Chromium <0,000068 mg/l
below limit of quantification
 25 µg/l
< 0.3 % *
Mean
Copper <0,0020 mg/l
below limit of quantification
 2 mg/l
< 0.1 % *
Mean
Cyanide <0,010 mg/l
below limit of quantification
 50 µg/l
< 20 % *
Mean
Dichlorprop <0,000030 mg/l
below limit of quantification
 — — Mean
Dimefuron <0,000030 mg/l
below limit of quantification
 — — Mean
Dimethachlor <0,000030 mg/l
below limit of quantification
 — — Mean
Dimethenamid <0,000030 mg/l
below limit of quantification
 — — Mean
Dimethoate <0,000030 mg/l
below limit of quantification
 — — Mean
Diuron <0,000030 mg/l
below limit of quantification
 — — Mean
Ethidimuron <0,000030 mg/l
below limit of quantification
 — — Mean
Fluoride <0,20 mg/l
below limit of quantification
 1.5 mg/l
< 13 % *
Mean
Hexazinone <0,000030 mg/l
below limit of quantification
 — — Mean
Indeno(1,2,3-cd)pyrene <0,000025 mg/l
below limit of quantification
 — — Mean
Isoproturon <0,000030 mg/l
below limit of quantification
 — — Mean
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Lenacil <0,000030 mg/l
below limit of quantification
 — — Mean
MCPA <0,000030 mg/l
below limit of quantification
 — — Mean
Mecoprop <0,000030 mg/l
below limit of quantification
 — — Mean
Mercury <0,0001 mg/l
below limit of quantification
 1 µg/l
< 10 % *
Mean
Metamitron <0,000030 mg/l
below limit of quantification
 — — Mean
Metazachlor <0,000030 mg/l
below limit of quantification
 — — Mean
Methabenzthiazuron <0,000030 mg/l
below limit of quantification
 — — Mean
Metolachlor <0,000030 mg/l
below limit of quantification
 — — Mean
Metoxuron <0,000030 mg/l
below limit of quantification
 — — Mean
Metribuzin <0,000030 mg/l
below limit of quantification
 — — Mean
Nickel <0,0020 mg/l
below limit of quantification
 20 µg/l
< 10 % *
Mean
Nitrate <1,0 mg/l
below limit of quantification
 50 mg/l
< 2 % *
Mean
Nitrite <0,010 mg/l
below limit of quantification
 0.5 mg/l
< 2 % *
Mean
Prometryn <0,000030 mg/l
below limit of quantification
 — — Mean
Propazine <0,000030 mg/l
below limit of quantification
 — — Mean
Quinmerac <0,000030 mg/l
below limit of quantification
 — — Mean
Sebuthylazine <0,000030 mg/l
below limit of quantification
 — — Mean
Selenium <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Simazine <0,000030 mg/l
below limit of quantification
 — — Mean
Tebuconazole <0,000030 mg/l
below limit of quantification
 — — Mean
Terbuthylazine <0,000030 mg/l
below limit of quantification
 — — Mean
Tetrachloroethene <0,0010 mg/l
below limit of quantification
 — — Mean
Thiacloprid <0,000030 mg/l
below limit of quantification
 — — Mean
Trichloroethene <0,0010 mg/l
below limit of quantification
 — — Mean
Uranium <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean
Vinyl chloride <0,00015 mg/l
below limit of quantification
 0.5 µg/l
< 30 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Versorgungsbereich Wasserwerk Colbitz
Parameter Value Parametric value Share of the parametric value Reference
Colour ohne ohne 0.5 m⁻¹ — Mean

Further parameters (1)

Further parameters – Versorgungsbereich Wasserwerk Colbitz
Parameter Value Parametric value Share of the parametric value Reference
Oxygen 9,8 mg/l O2 — — Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.bode-wipper.de/wp-content/uploads/TWQ-Colbitz-2025.pdf · 26.01.2026 · Jahresmittelwert 2025 · retrieved on 10/07/2026

COLBITZ WW REINWASSER

Wasser- und Abwasserzweckverband "Bode-Wipper" Staßfurt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
14.3 °dH
Hardness range hart
Key values COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Sulphate 110 mg/l 250 mg/l
44 %
Mean
Sodium 0,985 mmol/l 200 mg/l — Mean
Show all recorded parameters (34 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Dimethachlor <0,000031 mg/l
below limit of quantification
 — — Mean
Metazachlor 0,000208 mg/l — — Mean
Metolachlor 0,000062 mg/l — — Mean

Metabolites (3)

Metabolites – COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Desphenyl-chloridazon <0,000038 mg/l
below limit of quantification
 — — Mean
Dimethachlor sulfonic acid CGA 369873 <0,000030 mg/l
below limit of quantification
 — — Mean
Methyl-desphenyl-chloridazon <0,000030 mg/l
below limit of quantification
 — — Mean

Indicator parameters (19)

Indicator parameters – COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,020 mg/l
below limit of quantification
 0.2 mg/l
< 10 % *
Mean
Ammonium <0,01 mg/l
below limit of quantification
 0.5 mg/l
< 2 % *
Mean
Calcite dissolution capacity -2 mg/l 5 mg/l CaCO3 — Mean
Chloride 41 mg/l 250 mg/l
16 %
Mean
Coliform bacteria 0 KBE/100 ml 0/100 ml — Mean
Colony count 22 °C 0 KBE/ml ohne anormale Veränderung — Mean
Colony count 36 °C 0 KBE/ml ohne anormale Veränderung — Mean
Conductivity (25 °C) 601 µS/cm 2,790 µS/cm — Mean
Iron <0,013 mg/l
below limit of quantification
 0.2 mg/l
< 6 % *
Mean
Manganese <0,002 mg/l
below limit of quantification
 50 µg/l
< 4 % *
Mean
Odour ohne ohne für den Verbraucher annehmbar — Mean
Oxidisability 2,8 mg/l O2 5 mg/l O2 — Mean
pH 7,61 ohne 6,5–9,5 — Mean
Sodium 0,985 mmol/l 200 mg/l — Mean
Sulphate 110 mg/l 250 mg/l
44 %
Mean
Taste ohne ohne für den Verbraucher annehmbar — Mean
Temperature 20,3 °C — — Mean
Total organic carbon (TOC) 4,32 mg/l C ohne anormale Veränderung — Mean
Turbidity 0,24 NTU 1 NTU — Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – COLBITZ WW REINWASSER
Parameter Value Parametric value Share of the parametric value Reference
Calcium 2,28 mmol/l — — Mean
Hardness range (WRMG) hart ohne — — Mean
Magnesium 0,27 mmol/l — — Mean
Potassium 0,091 mmol/l — — Mean
Saturation index 0,07 ohne — — Mean
Silicate / silicic acid 13,13 mg/l — — Mean
Sum of anion equivalents 5,73 mmol/l — — Mean
Sum of cation equivalents 5,78 mmol/l — — Mean
Total hardness 14,3 °dH — — Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.bode-wipper.de/wp-content/uploads/TWQ-Colbitz-2025.pdf · retrieved on 10/07/2026

Zahna

MIDEWA Wasserversorgungsgesellschaft in Mitteldeutschland mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
13.2 °dH
Hardness range mittel
Key values Zahna
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4,1 mg/l 50 mg/l
8 %
Mean · Zahna
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Zahna
Sulphate 121 mg/l 250 mg/l
48 %
Mean · Zahna
Sodium 12,4 mg/l 200 mg/l
6 %
Mean · Zahna

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (46 — most recent value per parameter)

Microbiology (1)

Microbiology – Zahna
Parameter Value Parametric value Share of the parametric value Reference
Intestinal enterococci 0 n/100 ml 0/100 ml — Mean · Zahna

Chemical parameters (23)

Chemical parameters – Zahna
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean · Zahna
Antimony <0,001 mg/l
below limit of quantification
 5 µg/l
< 20 % *
Mean · Zahna
Arsenic <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Zahna
Benzene 0,00028 mg/l 1 µg/l
28 %
Mean · Zahna
Benzo(a)pyrene <0,000003 mg/l
below limit of quantification
 10 ng/l
< 30 % *
Mean · Zahna
Boron 0,038 mg/l 1 mg/l
4 %
Mean · Zahna
Bromate <0,003 mg/l
below limit of quantification
 10 µg/l
< 30 % *
Mean · Zahna
Cadmium <0,0003 mg/l
below limit of quantification
 3 µg/l
< 10 % *
Mean · Zahna
Chlorate 0,04 mg/l 70 µg/l
57 %
Mean · Zahna
Chromium <0,0005 mg/l
below limit of quantification
 25 µg/l
< 2 % *
Mean · Zahna
Copper 0,005 mg/l 2 mg/l
0.3 %
Mean · Zahna
Cyanide <0,005 mg/l
below limit of quantification
 50 µg/l
< 10 % *
Mean · Zahna
Fluoride 0,14 mg/l 1.5 mg/l
9 %
Mean · Zahna
Lead <0,001 mg/l
below limit of quantification
 10 µg/l
< 10 % *
Mean · Zahna
Mercury <0,0001 mg/l
below limit of quantification
 1 µg/l
< 10 % *
Mean · Zahna
Nickel 0,003 mg/l 20 µg/l
15 %
Mean · Zahna
Nitrate 4,1 mg/l 50 mg/l
8 %
Mean · Zahna
Nitrite <0,01 mg/l
below limit of quantification
 0.5 mg/l
< 2 % *
Mean · Zahna
Polycyclic aromatic hydrocarbons < 0,000025 mg/l
below limit of quantification
 0.1 µg/l
< 25 % *
Mean · Zahna
Selenium 0,002 mg/l 10 µg/l
20 %
Mean · Zahna
Tetrachloroethene and Trichloroethene (sum) <0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Zahna
Trihalomethanes — Total 0,001 mg/l 50 µg/l
2 %
Mean · Zahna
Uranium < 0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Zahna

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (14)

Indicator parameters – Zahna
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,014 mg/l 0.2 mg/l
7 %
Mean · Zahna
Ammonium <0,05 mg/l
below limit of quantification
 0.5 mg/l
< 10 % *
Mean · Zahna
Chloride 34 mg/l 250 mg/l
14 %
Mean · Zahna
Coliform bacteria 0 n/100 ml 0/100 ml — Mean · Zahna
Colony count 36 °C 0 n/ml ohne anormale Veränderung — Mean · Zahna
Colour <0,1 m-1
below limit of quantification
 0.5 m⁻¹ — Mean · Zahna
Conductivity (25 °C) 534 µS/cm 2,790 µS/cm — Mean · Zahna
Iron 0,050 mg/l 0.2 mg/l
25 %
Mean · Zahna
Manganese <0,005 mg/l
below limit of quantification
 50 µg/l
< 10 % *
Mean · Zahna
pH 7,69 - 6,5–9,5 — Mean · Zahna
Sodium 12,4 mg/l 200 mg/l
6 %
Mean · Zahna
Sulphate 121 mg/l 250 mg/l
48 %
Mean · Zahna
Total organic carbon (TOC) 2,83 mg/l ohne anormale Veränderung — Mean · Zahna
Turbidity 0,29 NTU 1 NTU — Mean · Zahna

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – Zahna
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 1,89 mmol/l — — Mean · Zahna
Calcium 79,5 mg/l — — Mean · Zahna
Carbonate hardness 5,1 °dH — — Mean · Zahna
Hardness range (WRMG) mittel - — — Mean · Zahna
Magnesium 7,2 mg/l — — Mean · Zahna
Potassium 3,18 mg/l — — Mean · Zahna
Silicate / silicic acid 15,10 mg/l — — Mean · Zahna
Total hardness 2,36 mmol/l — — Mean · Zahna

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.midewa.de/fileadmin/user_upload/Trinkwasserwerte_erweiterte/Analysen_WW_2023_MIDEWA_.pdf · Mittelwerte Januar bis Dezember 2023 · retrieved on 11/07/2026

Fernwasser Ostharz

MIDEWA Wasserversorgungsgesellschaft in Mitteldeutschland mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2021. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
4.4 °dH
Hardness range weich
Key values Fernwasser Ostharz
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 8 mg/l 50 mg/l
16 %
Mean · Fernwasser Ostharz
Sulphate 22 mg/l 250 mg/l
9 %
Mean · Fernwasser Ostharz
Sodium 10 mg/l 200 mg/l
5 %
Mean · Fernwasser Ostharz
Show all recorded parameters (14 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Fernwasser Ostharz
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,05 mg/l 1.5 mg/l
3 %
Mean · Fernwasser Ostharz
Nitrate 8 mg/l 50 mg/l
16 %
Mean · Fernwasser Ostharz
Uranium < 0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Fernwasser Ostharz

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Fernwasser Ostharz
Parameter Value Parametric value Share of the parametric value Reference
Chloride 19 mg/l 250 mg/l
8 %
Mean · Fernwasser Ostharz
Conductivity (25 °C) 204 µS/cm 2,790 µS/cm — Mean · Fernwasser Ostharz
pH 8,14 — 6,5–9,5 — Mean · Fernwasser Ostharz
Sodium 10 mg/l 200 mg/l
5 %
Mean · Fernwasser Ostharz
Sulphate 22 mg/l 250 mg/l
9 %
Mean · Fernwasser Ostharz
Total organic carbon (TOC) 1,6 mg/l ohne anormale Veränderung — Mean · Fernwasser Ostharz

Further parameters (5)

Further parameters – Fernwasser Ostharz
Parameter Value Parametric value Share of the parametric value Reference
Calcium 25,4 mg/l — — Mean · Fernwasser Ostharz
Hardness range (WRMG) weich — — — Single value · Fernwasser Ostharz
Magnesium 3,5 mg/l — — Mean · Fernwasser Ostharz
Potassium 1,2 mg/l — — Mean · Fernwasser Ostharz
Total hardness 0,79 mmol/l — — Mean · Fernwasser Ostharz

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.midewa.de/fileadmin/user_upload/211015_MIDEWA_TW-Werte_A4_online.pdf · Mittelwerte Mai 2020 bis Mai 2021 · retrieved on 25/07/2026

Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring

MIDEWA Wasserversorgungsgesellschaft in Mitteldeutschland mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2021. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
9.9 °dH
Hardness range mittel
Key values Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6 mg/l 50 mg/l
12 %
Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Sulphate 82 mg/l 250 mg/l
33 %
Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Sodium 13 mg/l 200 mg/l
7 %
Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Show all recorded parameters (14 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,05 mg/l 1.5 mg/l
3 %
Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Nitrate 6 mg/l 50 mg/l
12 %
Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Uranium < 0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Parameter Value Parametric value Share of the parametric value Reference
Chloride 32 mg/l 250 mg/l
13 %
Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Conductivity (25 °C) 428 µS/cm 2,790 µS/cm — Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
pH 7,72 — 6,5–9,5 — Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Sodium 13 mg/l 200 mg/l
7 %
Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Sulphate 82 mg/l 250 mg/l
33 %
Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Total organic carbon (TOC) 1,8 mg/l ohne anormale Veränderung — Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring

Further parameters (5)

Further parameters – Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Parameter Value Parametric value Share of the parametric value Reference
Calcium 57,4 mg/l — — Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Hardness range (WRMG) mittel — — — Single value · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Magnesium 7,8 mg/l — — Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Potassium 2,3 mg/l — — Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring
Total hardness 1,77 mmol/l — — Mean · Fernmischwasser Ostharz + Fernwasser Elbaue-Nordring

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.midewa.de/fileadmin/user_upload/211015_MIDEWA_TW-Werte_A4_online.pdf · Mai 2020 bis Mai 2021 · retrieved on 25/07/2026

Fernwasser Elbaue-Nordring

MIDEWA Wasserversorgungsgesellschaft in Mitteldeutschland mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2021. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.5 °dH
Hardness range hart
Key values Fernwasser Elbaue-Nordring
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2 mg/l 50 mg/l
4 %
Mean · Fernwasser Elbaue-Nordring
Sulphate 179 mg/l 250 mg/l
72 %
Mean · Fernwasser Elbaue-Nordring
Sodium 21 mg/l 200 mg/l
11 %
Mean · Fernwasser Elbaue-Nordring
Show all recorded parameters (14 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Fernwasser Elbaue-Nordring
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,09 mg/l 1.5 mg/l
6 %
Mean · Fernwasser Elbaue-Nordring
Nitrate 2 mg/l 50 mg/l
4 %
Mean · Fernwasser Elbaue-Nordring
Uranium < 0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Fernwasser Elbaue-Nordring

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Fernwasser Elbaue-Nordring
Parameter Value Parametric value Share of the parametric value Reference
Chloride 44 mg/l 250 mg/l
18 %
Mean · Fernwasser Elbaue-Nordring
Conductivity (25 °C) 709 µS/cm 2,790 µS/cm — Mean · Fernwasser Elbaue-Nordring
pH 7,65 — 6,5–9,5 — Mean · Fernwasser Elbaue-Nordring
Sodium 21 mg/l 200 mg/l
11 %
Mean · Fernwasser Elbaue-Nordring
Sulphate 179 mg/l 250 mg/l
72 %
Mean · Fernwasser Elbaue-Nordring
Total organic carbon (TOC) 2,0 mg/l ohne anormale Veränderung — Mean · Fernwasser Elbaue-Nordring

Further parameters (5)

Further parameters – Fernwasser Elbaue-Nordring
Parameter Value Parametric value Share of the parametric value Reference
Calcium 106,4 mg/l — — Mean · Fernwasser Elbaue-Nordring
Hardness range (WRMG) hart — — — Single value · Fernwasser Elbaue-Nordring
Magnesium 14,7 mg/l — — Mean · Fernwasser Elbaue-Nordring
Potassium 5,2 mg/l — — Mean · Fernwasser Elbaue-Nordring
Total hardness 3,30 mmol/l — — Mean · Fernwasser Elbaue-Nordring

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.midewa.de/fileadmin/user_upload/211015_MIDEWA_TW-Werte_A4_online.pdf · Mittelwerte Mai 2020 bis Mai 2021 · retrieved on 25/07/2026

Fernwasser Elbaue-Südring

MIDEWA Wasserversorgungsgesellschaft in Mitteldeutschland mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2021. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
12.2 °dH
Hardness range mittel
Key values Fernwasser Elbaue-Südring
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1 mg/l 50 mg/l
2 %
Mean · Fernwasser Elbaue-Südring
Sulphate 117 mg/l 250 mg/l
47 %
Mean · Fernwasser Elbaue-Südring
Sodium 23 mg/l 200 mg/l
12 %
Mean · Fernwasser Elbaue-Südring
Show all recorded parameters (14 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Fernwasser Elbaue-Südring
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,12 mg/l 1.5 mg/l
8 %
Mean · Fernwasser Elbaue-Südring
Nitrate 1 mg/l 50 mg/l
2 %
Mean · Fernwasser Elbaue-Südring
Uranium < 0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Fernwasser Elbaue-Südring

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Fernwasser Elbaue-Südring
Parameter Value Parametric value Share of the parametric value Reference
Chloride 43 mg/l 250 mg/l
17 %
Mean · Fernwasser Elbaue-Südring
Conductivity (25 °C) 541 µS/cm 2,790 µS/cm — Mean · Fernwasser Elbaue-Südring
pH 7,91 — 6,5–9,5 — Mean · Fernwasser Elbaue-Südring
Sodium 23 mg/l 200 mg/l
12 %
Mean · Fernwasser Elbaue-Südring
Sulphate 117 mg/l 250 mg/l
47 %
Mean · Fernwasser Elbaue-Südring
Total organic carbon (TOC) 1,7 mg/l ohne anormale Veränderung — Mean · Fernwasser Elbaue-Südring

Further parameters (5)

Further parameters – Fernwasser Elbaue-Südring
Parameter Value Parametric value Share of the parametric value Reference
Calcium 69,4 mg/l — — Mean · Fernwasser Elbaue-Südring
Hardness range (WRMG) mittel — — — Single value · Fernwasser Elbaue-Südring
Magnesium 10,2 mg/l — — Mean · Fernwasser Elbaue-Südring
Potassium 4,6 mg/l — — Mean · Fernwasser Elbaue-Südring
Total hardness 2,18 mmol/l — — Mean · Fernwasser Elbaue-Südring

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.midewa.de/fileadmin/user_upload/211015_MIDEWA_TW-Werte_A4_online.pdf · Mittelwerte Mai 2020 bis Mai 2021 · retrieved on 25/07/2026

Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)

MIDEWA Wasserversorgungsgesellschaft in Mitteldeutschland mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2021. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.5 °dH
Hardness range mittel
Key values Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5 mg/l 50 mg/l
10 %
Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Sulphate 65 mg/l 250 mg/l
26 %
Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Sodium 17 mg/l 200 mg/l
9 %
Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Show all recorded parameters (14 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,05 mg/l 1.5 mg/l
3 %
Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Nitrate 5 mg/l 50 mg/l
10 %
Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Uranium < 0,0005 mg/l
below limit of quantification
 10 µg/l
< 5 % *
Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Parameter Value Parametric value Share of the parametric value Reference
Chloride 30 mg/l 250 mg/l
12 %
Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Conductivity (25 °C) 385 µS/cm 2,790 µS/cm — Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
pH 7,97 — 6,5–9,5 — Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Sodium 17 mg/l 200 mg/l
9 %
Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Sulphate 65 mg/l 250 mg/l
26 %
Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Total organic carbon (TOC) 1,7 mg/l ohne anormale Veränderung — Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)

Further parameters (5)

Further parameters – Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Parameter Value Parametric value Share of the parametric value Reference
Calcium 48,6 mg/l — — Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Hardness range (WRMG) mittel — — — Single value · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Magnesium 6,9 mg/l — — Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Potassium 2,7 mg/l — — Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)
Total hardness 1,52 mmol/l — — Mean · Fernwasser Ostharz/Elbaue-Südring (wechselnde Mischungsverhältnisse)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.midewa.de/fileadmin/user_upload/211015_MIDEWA_TW-Werte_A4_online.pdf · Mittelwerte Mai 2020 bis Mai 2021 · retrieved on 25/07/2026

Frequent questions about postcode 39444

How hard is the water in Postcode 39444?
Wasser- und Abwasserzweckverband "Bode-Wipper" Staßfurt publishes a total hardness of 14.3 °dH for the supply zone Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER (hardness range hart). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 26.01.2026, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Postcode 39444?
Wasser- und Abwasserzweckverband "Bode-Wipper" Staßfurt publishes a nitrate value of <1,0 mg/l for the supply zone Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: 26.01.2026, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 39444?
Wasser- und Abwasserzweckverband "Bode-Wipper" Staßfurt. The values shown here come from the supply zone Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle COLBITZ WW REINWASSER and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.