Drinking water in 39110
For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle: COLBITZ WW REINWASSER
Staedtische Werke Magdeburg GmbH & Co. KG (SWM); Wassergewinnung/Analytik: Trinkwasserversorgung Magdeburg GmbH (TWM)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
Water hardness
14.3 °dH
Hardness range hart
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | <1,0 mg/l below limit of quantification | 50 mg/l | < 2 % * | Mean |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Mean |
| Sulphate | 110 mg/l | 250 mg/l | 44 % | Mean |
| Sodium | 0,985 mmol/l | 200 mg/l | — | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (92 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Mean |
| Intestinal enterococci | 0 KBE/100 ml | 0/100 ml | — | Mean |
Chemical parameters (60)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,00050 mg/l below limit of quantification | 3 µg/l | < 17 % * | Mean |
| Antimony | <0,0010 mg/l below limit of quantification | 5 µg/l | < 20 % * | Mean |
| Arsenic | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Atrazine | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Azoxystrobin | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Bentazone | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Benzene | <0,00030 mg/l below limit of quantification | 1 µg/l | < 30 % * | Mean |
| Benzo(a)pyrene | <0,0000025 mg/l below limit of quantification | 10 ng/l | < 25 % * | Mean |
| Benzo(b)fluoranthene | <0,000025 mg/l below limit of quantification | — | — | Mean |
| Benzo(ghi)perylene | <0,000025 mg/l below limit of quantification | — | — | Mean |
| Benzo(k)fluoranthene | <0,000025 mg/l below limit of quantification | — | — | Mean |
| Bisphenol A | <0,00018 mg/l below limit of quantification | 2.5 µg/l | < 7 % * | Mean |
| Boron | <0,100 mg/l below limit of quantification | 1 mg/l | < 10 % * | Mean |
| Bromacil | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Bromate | <0,002 mg/l below limit of quantification | 10 µg/l | < 20 % * | Mean |
| Bromoxynil | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Cadmium | <0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Mean |
| Chloridazon | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Chlorotoluron | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Chromium | <0,000068 mg/l below limit of quantification | 25 µg/l | < 0.3 % * | Mean |
| Copper | <0,0020 mg/l below limit of quantification | 2 mg/l | < 0.1 % * | Mean |
| Cyanide | <0,010 mg/l below limit of quantification | 50 µg/l | < 20 % * | Mean |
| Dichlorprop | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Dimefuron | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Dimethachlor | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Dimethenamid | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Dimethoate | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Diuron | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Ethidimuron | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Fluoride | <0,20 mg/l below limit of quantification | 1.5 mg/l | < 13 % * | Mean |
| Hexazinone | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Indeno(1,2,3-cd)pyrene | <0,000025 mg/l below limit of quantification | — | — | Mean |
| Isoproturon | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Lenacil | <0,000030 mg/l below limit of quantification | — | — | Mean |
| MCPA | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Mecoprop | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Mean |
| Metamitron | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Metazachlor | 0,000208 mg/l | — | — | Mean |
| Methabenzthiazuron | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Metolachlor | 0,000062 mg/l | — | — | Mean |
| Metoxuron | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Metribuzin | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Nickel | <0,0020 mg/l below limit of quantification | 20 µg/l | < 10 % * | Mean |
| Nitrate | <1,0 mg/l below limit of quantification | 50 mg/l | < 2 % * | Mean |
| Nitrite | <0,010 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Mean |
| Prometryn | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Propazine | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Quinmerac | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Sebuthylazine | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Simazine | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Tebuconazole | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Terbuthylazine | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Tetrachloroethene | <0,0010 mg/l below limit of quantification | — | — | Mean |
| Thiacloprid | <0,000030 mg/l below limit of quantification | — | — | Mean |
| Trichloroethene | <0,0010 mg/l below limit of quantification | — | — | Mean |
| Uranium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Vinyl chloride | <0,00015 mg/l below limit of quantification | 0.5 µg/l | < 30 % * | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Metabolites (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Desphenyl-chloridazon | <0,000038 mg/l below limit of quantification | — | — | Mean |
| Methyl-desphenyl-chloridazon | <0,000030 mg/l below limit of quantification | — | — | Mean |
Indicator parameters (20)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,020 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Mean |
| Ammonium | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Mean |
| Calcite dissolution capacity | -2 mg/l | 5 mg/l CaCO3 | — | Mean |
| Chloride | 41 mg/l | 250 mg/l | 16 % | Mean |
| Coliform bacteria | 0 KBE/100 ml | 0/100 ml | — | Mean |
| Colony count 22 °C | 0 KBE/ml | ohne anormale Veränderung | — | Mean |
| Colony count 36 °C | 0 KBE/ml | ohne anormale Veränderung | — | Mean |
| Colour | ohne ohne | 0.5 m⁻¹ | — | Mean |
| Conductivity (25 °C) | 601 µS/cm | 2,790 µS/cm | — | Mean |
| Iron | <0,013 mg/l below limit of quantification | 0.2 mg/l | < 6 % * | Mean |
| Manganese | <0,002 mg/l below limit of quantification | 50 µg/l | < 4 % * | Mean |
| Odour | ohne ohne | für den Verbraucher annehmbar | — | Mean |
| Oxidisability | 2,8 mg/l O2 | 5 mg/l O2 | — | Mean |
| pH | 7,61 ohne | 6,5–9,5 | — | Mean |
| Sodium | 0,985 mmol/l | 200 mg/l | — | Mean |
| Sulphate | 110 mg/l | 250 mg/l | 44 % | Mean |
| Taste | ohne ohne | für den Verbraucher annehmbar | — | Mean |
| Temperature | 20,3 °C | — | — | Mean |
| Total organic carbon (TOC) | 4,32 mg/l C | ohne anormale Veränderung | — | Mean |
| Turbidity | 0,24 NTU | 1 NTU | — | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 2,28 mmol/l | — | — | Mean |
| Hardness range (WRMG) | hart ohne | — | — | Mean |
| Magnesium | 0,27 mmol/l | — | — | Mean |
| Oxygen | 9,8 mg/l O2 | — | — | Mean |
| Potassium | 0,091 mmol/l | — | — | Mean |
| Saturation index | 0,07 ohne | — | — | Mean |
| Silicate / silicic acid | 13,13 mg/l | — | — | Mean |
| Total hardness | 14,3 °dH | — | — | Mean |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.wasser-twm.de/media/uploads/wasserqualitaeten/2025/WW-Colbitz-2025.pdf · 26.01.2026 · Jahresmittelwert 2025 · retrieved on 11/07/2026
Show 1 more supply zone in this postcode
WVG WW Colbitz
WVG WW ColbitzAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Lead | 0,001 mg/l | 10 µg/l | 10 % | Mean · WVG WW Colbitz |
| Sulphate | 113,68 mg/l | 250 mg/l | 45 % | Mean · WVG WW Colbitz |
| Sodium | 20,66 mg/l | 200 mg/l | 10 % | Mean · WVG WW Colbitz |
Show all recorded parameters (10 — most recent value per parameter)
Chemical parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Cadmium | 0,0001 mg/l | 3 µg/l | 3 % | Mean · WVG WW Colbitz |
| Copper | 0,1926 mg/l | 2 mg/l | 10 % | Mean · WVG WW Colbitz |
| Lead | 0,001 mg/l | 10 µg/l | 10 % | Mean · WVG WW Colbitz |
| Nickel | 0,0015 mg/l | 20 µg/l | 8 % | Mean · WVG WW Colbitz |
Indicator parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | 0,01 mg/l | 0.5 mg/l | 2 % | Mean · WVG WW Colbitz |
| Chloride | 37,775909 mg/l | 250 mg/l | 15 % | Mean · WVG WW Colbitz |
| Iron | 0,0312 mg/l | 0.2 mg/l | 16 % | Mean · WVG WW Colbitz |
| Manganese | 0,002 mg/l | 50 µg/l | 4 % | Mean · WVG WW Colbitz |
| Sodium | 20,66 mg/l | 200 mg/l | 10 % | Mean · WVG WW Colbitz |
| Sulphate | 113,68 mg/l | 250 mg/l | 45 % | Mean · WVG WW Colbitz |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://lavst.azurewebsites.net/wasserkarte/gemeinden/15003000z.pdf · Jahresmittel 2023 · Jahresmittel 2023 · retrieved on 18/08/2026
Frequent questions about postcode 39110
- How hard is the water in Postcode 39110?
- Staedtische Werke Magdeburg GmbH & Co. KG (SWM); Wassergewinnung/Analytik: Trinkwasserversorgung Magdeburg GmbH (TWM) publishes a total hardness of 14.3 °dH for the supply zone Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle: COLBITZ WW REINWASSER (hardness range hart). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 26.01.2026, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Postcode 39110?
- Staedtische Werke Magdeburg GmbH & Co. KG (SWM); Wassergewinnung/Analytik: Trinkwasserversorgung Magdeburg GmbH (TWM) publishes a nitrate value of <1,0 mg/l for the supply zone Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle: COLBITZ WW REINWASSER. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: 26.01.2026, retrieved on 11/07/2026.
- Who supplies the drinking water in Postcode 39110?
- Staedtische Werke Magdeburg GmbH & Co. KG (SWM); Wassergewinnung/Analytik: Trinkwasserversorgung Magdeburg GmbH (TWM). The values shown here come from the supply zone Versorgungsbereich Wasserwerk Colbitz / Entnahmestelle: COLBITZ WW REINWASSER and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.