Skip to content
maunawai.info

Drinking water in 36088

For this postcode Stadtwerke Hünfeld publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 11 underneath. The water supplier publishes 4 further local networks that cannot be clearly assigned to this postcode — they are listed on the water supplier page.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Stt. Dammersbach

Stadtwerke Hünfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.2 °dH
Hardness range mittel

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Dammersbach
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Stt. Dammersbach
Sum of alkaline earth metals 1,47 mmol/l Single value · Stt. Dammersbach
Total hardness 8,2 ° dH Single value · Stt. Dammersbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026
Show 11 more supply zones in this postcode

Stt. Großenbach

Stadtwerke Hünfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.1 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Großenbach
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Großenbach
Sum of alkaline earth metals 1,44 mmol/l Single value · Stt. Großenbach
Total hardness 8,1 ° dH Single value · Stt. Großenbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Stt. Kirchhasel/Neuwirtshaus

Stadtwerke Hünfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.1 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Kirchhasel/Neuwirtshaus
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Kirchhasel/Neuwirtshaus
Sum of alkaline earth metals 1,44 mmol/l Single value · Stt. Kirchhasel/Neuwirtshaus
Total hardness 8,1 ° dH Single value · Stt. Kirchhasel/Neuwirtshaus

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.1 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Malges
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Malges
Sum of alkaline earth metals 1,44 mmol/l Single value · Stt. Malges
Total hardness 8,1 ° dH Single value · Stt. Malges

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Stt. Roßbach

Stadtwerke Hünfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.1 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Roßbach
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Roßbach
Sum of alkaline earth metals 1,44 mmol/l Single value · Stt. Roßbach
Total hardness 8,1 ° dH Single value · Stt. Roßbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Mitte
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Mitte
Sum of alkaline earth metals 1,49 mmol/l Single value · Mitte
Total hardness 8,3 ° dH Single value · Mitte

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Stt. Großenbach aus Zulauf Praforstgruppe (Egerring)

Stadtwerke Hünfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Großenbach aus Zulauf Praforstgruppe (Egerring)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Großenbach aus Zulauf Praforstgruppe (Egerring)
Sum of alkaline earth metals 1,49 mmol/l Single value · Stt. Großenbach aus Zulauf Praforstgruppe (Egerring)
Total hardness 8,3 ° dH Single value · Stt. Großenbach aus Zulauf Praforstgruppe (Egerring)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Stt. Mackenzell

Stadtwerke Hünfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Mackenzell
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Mackenzell
Sum of alkaline earth metals 1,49 mmol/l Single value · Stt. Mackenzell
Total hardness 8,3 ° dH Single value · Stt. Mackenzell

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Stt. Michelsrombach

Stadtwerke Hünfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
5.7 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Michelsrombach
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Michelsrombach
Sum of alkaline earth metals 1,02 mmol/l Single value · Stt. Michelsrombach
Total hardness 5,7 ° dH Single value · Stt. Michelsrombach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Stt. Molzbach

Stadtwerke Hünfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Molzbach
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Molzbach
Sum of alkaline earth metals 1,49 mmol/l Single value · Stt. Molzbach
Total hardness 8,3 ° dH Single value · Stt. Molzbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Nüst
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Nüst
Sum of alkaline earth metals 1,49 mmol/l Single value · Stt. Nüst
Total hardness 8,3 ° dH Single value · Stt. Nüst

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Stt. Oberfeld

Stadtwerke Hünfeld

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
5.7 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Stt. Oberfeld
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Stt. Oberfeld
Sum of alkaline earth metals 1,02 mmol/l Single value · Stt. Oberfeld
Total hardness 5,7 ° dH Single value · Stt. Oberfeld

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-huenfeld.de/wasser/ · Oktober 2023 · retrieved on 25/07/2026

Frequent questions about postcode 36088

How hard is the water in Postcode 36088?
Stadtwerke Hünfeld publishes a total hardness of 8.2 °dH for the supply zone Stt. Dammersbach (hardness range mittel). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 36088?
Stadtwerke Hünfeld. The values shown here come from the supply zone Stt. Dammersbach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.