Skip to content
maunawai.info

Drinking water in 35644

For this postcode Gemeinde Hohenahr publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 9 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

hohenahr gesamt

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – hohenahr gesamt
Parameter Value Parametric value Share of the parametric value Reference
pH 7,9 6,5–9,5 Maximum

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 9 more supply zones in this postcode

Ahrdt / Gesamt

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Ahrdt / Gesamt
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 18,6 (hart) Single value · Ahrdt / Gesamt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Altenkirchen / Gesamt

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Altenkirchen / Gesamt
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 13,4 (mittel) Single value · Altenkirchen / Gesamt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Erda / Hochdruckzone

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Erda / Hochdruckzone
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 11,8 (mittel) Single value · Erda / Hochdruckzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Erda / Tiefdruckzone

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Erda / Tiefdruckzone
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 14,3 (hart) Single value · Erda / Tiefdruckzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Großaltenstädten / Hochdruckzone

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Großaltenstädten / Hochdruckzone
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 11,8 (mittel) Single value · Großaltenstädten / Hochdruckzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Großaltenstädten / Tiefdruckzone

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Großaltenstädten / Tiefdruckzone
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 11,5 (mittel) Single value · Großaltenstädten / Tiefdruckzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Hohensolms / Gesamt

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Hohensolms / Gesamt
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 11,8 (mittel) Single value · Hohensolms / Gesamt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Mudersbach / Hochdruckzone

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Mudersbach / Hochdruckzone
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 13,4 (mittel) Single value · Mudersbach / Hochdruckzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Mudersbach / Tiefdruckzone

Gemeinde Hohenahr

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Mudersbach / Tiefdruckzone
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 14,3 (mittel) Single value · Mudersbach / Tiefdruckzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 35644

Who supplies the drinking water in Postcode 35644?
Gemeinde Hohenahr. The values shown here come from the supply zone hohenahr gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.