Skip to content
maunawai.info

Drinking water in 33803

One supply zone, water supplier: Gemeindewerke Steinhagen.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

steinhagen gesamt

Gemeindewerke Steinhagen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
12 °dH
Hardness range medium
Key values steinhagen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 19 mg/l 50 mg/l
38 %
Single value
Escherichia coli (E. coli) 0 in 100 ml 0/100 ml Single value
Sulphate 41 mg/l 250 mg/l
16 %
Single value
Sodium 11,8 mg/l 200 mg/l
6 %
Single value
Show all recorded parameters (21 — most recent value per parameter)

Microbiology (1)

Microbiology – steinhagen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 in 100 ml 0/100 ml Single value

Chemical parameters (2)

Chemical parameters – steinhagen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 19 mg/l 50 mg/l
38 %
Single value
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (13)

Indicator parameters – steinhagen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Chloride 25 mg/l 250 mg/l
10 %
Single value
Coliform bacteria 0 in 100 ml 0/100 ml Single value
Colony count 22 °C 0 in 1 ml ohne anormale Veränderung Single value
Colony count 36 °C 0 in 1 ml ohne anormale Veränderung Single value
Conductivity (25 °C) 540 µS/m 2,790 µS/cm Single value
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese < 0,01 mg/l
below limit of quantification
50 µg/l
< 20 % *
Single value
pH 7,44 6,5–9,5 Single value
Sodium 11,8 mg/l 200 mg/l
6 %
Single value
Sulphate 41 mg/l 250 mg/l
16 %
Single value
Temperature 10,7 °C Single value
Turbidity 0,27 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – steinhagen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Calcium 81,3 mg/l Single value
Hydrogen carbonate 211,7 mg/l Single value
Magnesium 2,9 mg/l Single value
Potassium 2,3 mg/l Single value
Total hardness 12,0 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gs-werke.de/produkte/wasser/wasserhaerte/ · retrieved on 11/07/2026

Frequent questions about postcode 33803

How hard is the water in Postcode 33803?
Gemeindewerke Steinhagen publishes a total hardness of 12 °dH for the supply zone steinhagen gesamt (hardness range medium). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Postcode 33803?
Gemeindewerke Steinhagen publishes a nitrate value of 19 mg/l for the supply zone steinhagen gesamt. The statutory parametric value is 50 mg/l; the measured value represents 38 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 33803?
Gemeindewerke Steinhagen. The values shown here come from the supply zone steinhagen gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.