Skip to content
maunawai.info

Drinking water in 31157

One supply zone, water supplier: Wasserversorgung Sarstedt.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 10/04/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
3.2 °dH
Hardness range I
Key values sarstedt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5,5 mg/L 50 mg/l
11 %
Single value
Lead <0,0011 mg/L
below limit of quantification
10 µg/l
< 11 % *
Single value
Escherichia coli (E. coli) 0 in 100 mL 0/100 ml Single value
Sulphate 26,6 mg/L 250 mg/l
11 %
Single value
Sodium 7,7 mg/L 200 mg/l
4 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (60 — most recent value per parameter)

Microbiology (2)

Microbiology – sarstedt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 in 100 mL 0/100 ml Single value
Intestinal enterococci 0 in 100 mL 0/100 ml Single value

Chemical parameters (26)

Chemical parameters – sarstedt gesamt
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0009 mg/L
below limit of quantification
3 µg/l
< 30 % *
Single value
Acrylamide <0,000025 mg/L
below limit of quantification
0.1 µg/l
< 25 % *
Single value
Antimony <0,0015 mg/L
below limit of quantification
5 µg/l
< 30 % *
Single value
Arsenic <0,0005 mg/L
below limit of quantification
10 µg/l
< 5 % *
Single value
Benzene <0,0003 mg/L
below limit of quantification
1 µg/l
< 30 % *
Single value
Benzo(a)pyrene <0,000002 mg/L
below limit of quantification
10 ng/l
< 20 % *
Single value
Boron <0,03 mg/L
below limit of quantification
1 mg/l
< 3 % *
Single value
Bromate <0,003 mg/L
below limit of quantification
10 µg/l
< 30 % *
Single value
Cadmium <0,0004 mg/L
below limit of quantification
3 µg/l
< 13 % *
Single value
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper <0,010 mg/L
below limit of quantification
2 mg/l
< 0.5 % *
Single value
Cyanide <0,004 mg/L
below limit of quantification
50 µg/l
< 8 % *
Single value
Epichlorohydrin <0,00005 mg/L
below limit of quantification
0.1 µg/l
< 50 % *
Single value
Fluoride 0,05 mg/L 1.5 mg/l
3 %
Single value
Lead <0,0011 mg/L
below limit of quantification
10 µg/l
< 11 % *
Single value
Mercury <0,00010 mg/L
below limit of quantification
1 µg/l
< 10 % *
Single value
Nickel <0,0010 mg/L
below limit of quantification
20 µg/l
< 5 % *
Single value
Nitrate 5,5 mg/L 50 mg/l
11 %
Single value
Nitrite <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides — Total n.n. mg/L
not detectable
0.5 µg/l Single value
Polycyclic aromatic hydrocarbons <0,000010 mg/L
below limit of quantification
0.1 µg/l
< 10 % *
Single value
Selenium <0,0010 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value
Tetrachloroethene and Trichloroethene (sum) <0,0005 mg/L
below limit of quantification
10 µg/l
< 5 % *
Single value
Trihalomethanes — Total 0,0079 mg/L 50 µg/l
16 %
Single value
Uranium <0,0001 mg/L
below limit of quantification
10 µg/l
< 1 % *
Single value
Vinyl chloride mg/L
not determined
0.5 µg/l Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (21)

Indicator parameters – sarstedt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,019 mg/L 0.2 mg/l
10 %
Single value
Ammonium <0,04 mg/L
below limit of quantification
0.5 mg/l
< 8 % *
Single value
Calcite dissolution capacity 0,1 mg/L 5 mg/l CaCO3 Single value
Chloride 10,4 mg/L 250 mg/l
4 %
Single value
Clostridium perfringens (including spores) 0 in 100 mL 0/100 ml Single value
Coliform bacteria 0 in 100 mL 0/100 ml Single value
Colony count 22 °C in 1 mL
not determined
ohne anormale Veränderung Single value
Colony count 36 °C in 1 mL
not determined
ohne anormale Veränderung Single value
Colour <0,1 1/m
below limit of quantification
0.5 m⁻¹ Single value
Conductivity (25 °C) 167 µS/cm 2,790 µS/cm Single value
Iron <0,010 mg/L
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese <0,001 mg/L
below limit of quantification
50 µg/l
< 2 % *
Single value
Odour normal - für den Verbraucher annehmbar Single value
Oxidisability mg/L O2
not determined
5 mg/l O2 Single value
pH 8,87 - 6,5–9,5 Single value
Sodium 7,7 mg/L 200 mg/l
4 %
Single value
Sulphate 26,6 mg/L 250 mg/l
11 %
Single value
Taste normal - für den Verbraucher annehmbar Single value
Temperature 6,8 °C Single value
Total organic carbon (TOC) 1,1 mg/L ohne anormale Veränderung Single value
Turbidity 0,15 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (11)

Further parameters – sarstedt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 0,62 mmol/L Single value
Base capacity to pH 8.2 mmol/L
not determined
Single value
Calcium 0,442 mmol/L Single value
Carbonate hardness 1,7 °dH Single value
Hardness range (WRMG) I - Single value
Magnesium 0,128 mmol/L Single value
Oxygen 12,9 mg/L Single value
Potassium 0,020 mmol/L Single value
Silicate / silicic acid 6,1 mg/L SiO2 Single value
Sum of alkaline earth metals 0,569 mmol/L Single value
Total hardness 3,2 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 31157

How hard is the water in Postcode 31157?
Wasserversorgung Sarstedt publishes a total hardness of 3.2 °dH for the supply zone sarstedt gesamt (hardness range I). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 10.04.2018, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Postcode 31157?
Wasserversorgung Sarstedt publishes a nitrate value of 5,5 mg/L for the supply zone sarstedt gesamt. The statutory parametric value is 50 mg/l; the measured value represents 11 % of the parametric value. Basis: 10.04.2018, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 31157?
Wasserversorgung Sarstedt. The values shown here come from the supply zone sarstedt gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.