Skip to content
maunawai.info

Drinking water in 31008

For this postcode ÜWL publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 7 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

lamspringe gesamt

ÜWL

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
2.6 °dH
Hardness range soft
Key values lamspringe gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,2 mg/l 50 mg/l
14 %
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Sulphate 16 mg/l 250 mg/l
6 %
Single value
Sodium 6,0 mg/l 200 mg/l
3 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (88 — most recent value per parameter)

Microbiology (2)

Microbiology – lamspringe gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Chemical parameters (62)

Chemical parameters – lamspringe gesamt
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,3 µg/l
below limit of quantification
3 µg/l
< 10 % *
Single value
Aldrin < 0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
AMPA < 0,05 µg/l
below limit of quantification
Single value
Antimony < 0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Atrazine < 0,02 µg/l
below limit of quantification
Single value
Bentazone < 0,05 µg/l
below limit of quantification
Single value
Benzene < 0,2 µg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Benzo(a)pyrene < 0,002 µg/l
below limit of quantification
10 ng/l
< 20 % *
Single value
Benzo(b)fluoranthene < 0,002 µg/l
below limit of quantification
Single value
Benzo(ghi)perylene < 0,002 µg/l
below limit of quantification
Single value
Benzo(k)fluoranthene < 0,002 µg/l
below limit of quantification
Single value
Bisphenol A < 0,01 µg/l
below limit of quantification
2.5 µg/l
< 0.4 % *
Single value
Boron < 0,05 mg/l
below limit of quantification
1 mg/l
< 5 % *
Single value
Bromacil < 0,02 µg/l
below limit of quantification
Single value
Bromate < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Bromodichloromethane 0,9 µg/l Single value
Cadmium < 0,0005 mg/l
below limit of quantification
3 µg/l
< 17 % *
Single value
Chlorate < 0,02 mg/l
below limit of quantification
70 µg/l
< 29 % *
Single value
Chloridazon < 0,05 µg/l
below limit of quantification
Single value
Chlorite < 0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value
Chlorotoluron < 0,05 µg/l
below limit of quantification
Single value
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper < 0,005 mg/l
below limit of quantification
2 mg/l
< 0.3 % *
Single value
Desethylatrazine < 0,02 µg/l
below limit of quantification
Single value
Desethylterbuthylazine < 0,02 µg/l
below limit of quantification
Single value
Desisopropylatrazine < 0,05 µg/l
below limit of quantification
Single value
Dibromochloromethane < 0,5 µg/l
below limit of quantification
Single value
Dichlorprop < 0,05 µg/l
below limit of quantification
Single value
Dieldrin < 0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
Diuron < 0,05 µg/l
below limit of quantification
Single value
Ethidimuron < 0,05 µg/l
below limit of quantification
Single value
Ethofumesate < 0,05 µg/l
below limit of quantification
Single value
Fluoride < 0,2 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Single value
Glyphosate < 0,05 µg/l
below limit of quantification
Single value
Heptachlor < 0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
Heptachlor epoxide < 0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
Indeno(1,2,3-cd)pyrene < 0,002 µg/l
below limit of quantification
Single value
Isoproturon < 0,05 µg/l
below limit of quantification
Single value
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
MCPA < 0,05 µg/l
below limit of quantification
Single value
Mecoprop < 0,05 µg/l
below limit of quantification
Single value
Mercury < 0,00005 mg/l
below limit of quantification
1 µg/l
< 5 % *
Single value
Metalaxyl < 0,05 µg/l
below limit of quantification
Single value
Metamitron < 0,05 µg/l
below limit of quantification
Single value
Metazachlor < 0,02 µg/l
below limit of quantification
Single value
Metolachlor < 0,05 µg/l
below limit of quantification
Single value
Metoxuron < 0,05 µg/l
below limit of quantification
Single value
Metribuzin < 0,05 µg/l
below limit of quantification
Single value
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value
Nitrate 7,2 mg/l 50 mg/l
14 %
Single value
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value
Oxadixyl < 0,01 µg/l
below limit of quantification
Single value
Selenium < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Simazine < 0,02 µg/l
below limit of quantification
Single value
Tebuconazole < 0,05 µg/l
below limit of quantification
Single value
Terbuthylazine < 0,02 µg/l
below limit of quantification
Single value
Tetrachloroethene < 0,1 µg/l
below limit of quantification
Single value
Tribromomethane (bromoform) < 0,5 µg/l
below limit of quantification
Single value
Trichloroethene < 0,1 µg/l
below limit of quantification
Single value
Trichloromethane (chloroform) 7,0 µg/l Single value
Uranium < 0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – lamspringe gesamt
Parameter Value Parametric value Share of the parametric value Reference
Trifluoroacetic acid (TFA) 0,48 µg/l 60 µg/l
UBA guide value
0.8 %
Single value

For trifluoroacetic acid (TFA), the German Drinking Water Ordinance does not specify a parametric value. The comparison is therefore made with the guide value of 60 µg/l issued by the Umweltbundesamt, which has replaced the earlier health-related guidance value of 3 µg/l. A guide value is not a legal maximum but a health-related classification.

Indicator parameters (14)

Indicator parameters – lamspringe gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,02 mg/l 0.2 mg/l
10 %
Single value
Ammonium < 0,04 mg/l
below limit of quantification
0.5 mg/l
< 8 % *
Single value
Calcite dissolution capacity -11,416 mg/l 5 mg/l CaCO3 Single value
Chloride 6,5 mg/l 250 mg/l
3 %
Single value
Clostridium perfringens (including spores) 0 KBE/100ml 0/100 ml Single value
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
pH 9,78 6,5–9,5 Single value
Sodium 6,0 mg/l 200 mg/l
3 %
Single value
Sulphate 16 mg/l 250 mg/l
6 %
Single value
Taste ohne Fremdgeschmack für den Verbraucher annehmbar Single value
Temperature 18,4 °C Single value
Total organic carbon (TOC) 0,7 mg/l ohne anormale Veränderung Single value
Turbidity 0,6 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – lamspringe gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 0,62 mmol/l Single value
Base capacity to pH 8.2 < 0,05 mmol/l
below limit of quantification
Single value
Calcium 14,5 mg/l Single value
Carbonate hardness 0,31 mmol/l Single value
Magnesium 2,43 mg/l Single value
Oxygen 9,1 mg/l Single value
Potassium 0,8 mg/l Single value
Sum of alkaline earth metals 0,5 mmol/l Single value
Total hardness 2,6 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 7 more supply zones in this postcode

eime gesamt

ÜWL

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
14 °dH
Hardness range mittel
Key values eime gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17,1 mg/L 50 mg/l
34 %
Single value
Escherichia coli (E. coli) 0 MPN/100 mL 0/100 ml Single value
Sulphate 84,9 mg/L 250 mg/l
34 %
Single value
Show all recorded parameters (73 — most recent value per parameter)

Microbiology (2)

Microbiology – eime gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 MPN/100 mL 0/100 ml Single value
Intestinal enterococci 0 KBE/100 mL 0/100 ml Single value

Chemical parameters (40)

Chemical parameters – eime gesamt
Parameter Value Parametric value Share of the parametric value Reference
2,6-Dichlorobenzamide (BAM) <0,000050 mg/L
below limit of quantification
Single value
AMPA <0,000070 mg/L
below limit of quantification
Single value
Atrazine <0,000030 mg/L
below limit of quantification
Single value
Bentazone <0,000030 mg/L
below limit of quantification
Single value
Benzene <0,0003 mg/L
below limit of quantification
1 µg/l
< 30 % *
Single value
Bisphenol A <0,00010 mg/L
below limit of quantification
2.5 µg/l
< 4 % *
Single value
Bromacil <0,000030 mg/L
below limit of quantification
Single value
Bromate <0,003 mg/L
below limit of quantification
10 µg/l
< 30 % *
Single value
Chlorate <0,020 mg/L
below limit of quantification
70 µg/l
< 29 % *
Single value
Chloridazon <0,000030 mg/L
below limit of quantification
Single value
Chlorite <0,06 mg/L
below limit of quantification
0.2 mg/l
< 30 % *
Single value
Chlorotoluron <0,000030 mg/L
below limit of quantification
Single value
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper <0,010 mg/L
below limit of quantification
2 mg/l
< 0.5 % *
Single value
Cyanide <0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value
Dichlorprop <0,000030 mg/L
below limit of quantification
Single value
Diuron <0,000030 mg/L
below limit of quantification
Single value
Ethidimuron <0,000030 mg/L
below limit of quantification
Single value
Ethofumesate <0,000030 mg/L
below limit of quantification
Single value
Fluoride 0,10 mg/L 1.5 mg/l
7 %
Single value
Glyphosate <0,000030 mg/L
below limit of quantification
Single value
Isoproturon <0,000030 mg/L
below limit of quantification
Single value
MCPA <0,000030 mg/L
below limit of quantification
Single value
Mecoprop <0,000030 mg/L
below limit of quantification
Single value
Mercury <0,00010 mg/L
below limit of quantification
1 µg/l
< 10 % *
Single value
Metalaxyl <0,000030 mg/L
below limit of quantification
Single value
Metamitron <0,000030 mg/L
below limit of quantification
Single value
Metazachlor <0,000050 mg/L
below limit of quantification
Single value
Metolachlor <0,000030 mg/L
below limit of quantification
Single value
Metoxuron <0,000030 mg/L
below limit of quantification
Single value
Metribuzin <0,000030 mg/L
below limit of quantification
Single value
Nitrate 17,1 mg/L 50 mg/l
34 %
Single value
Nitrite <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Oxadixyl <0,000030 mg/L
below limit of quantification
Single value
Simazine <0,000030 mg/L
below limit of quantification
Single value
Tebuconazole <0,000030 mg/L
below limit of quantification
Single value
Terbuthylazine <0,000030 mg/L
below limit of quantification
Single value
Tetrachloroethene <0,0010 mg/L
below limit of quantification
Single value
Trichloroethene <0,0009 mg/L
below limit of quantification
Single value
Trihalomethanes — Total 0,0068 mg/L 50 µg/l
14 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – eime gesamt
Parameter Value Parametric value Share of the parametric value Reference
Trifluoroacetic acid (TFA) 0,00082 mg/L 60 µg/l
UBA guide value
1 %
Single value

For trifluoroacetic acid (TFA), the German Drinking Water Ordinance does not specify a parametric value. The comparison is therefore made with the guide value of 60 µg/l issued by the Umweltbundesamt, which has replaced the earlier health-related guidance value of 3 µg/l. A guide value is not a legal maximum but a health-related classification.

Metabolites (6)

Metabolites – eime gesamt
Parameter Value Parametric value Share of the parametric value Reference
Desphenyl-chloridazon 0,00026 mg/L Single value
Dimethachlor acid CGA 50266 <0,000050 mg/L
below limit of quantification
Single value
Dimethachlor sulfonic acid CGA 354742 <0,000050 mg/L
below limit of quantification
Single value
Dimethenamid sulfonic acid M27 <0,000050 mg/L
below limit of quantification
Single value
Flufenacet sulfonic acid M2 <0,000050 mg/L
below limit of quantification
Single value
Methyl-desphenyl-chloridazon 0,000052 mg/L Single value

Indicator parameters (16)

Indicator parameters – eime gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,017 mg/L 0.2 mg/l
9 %
Single value
Ammonium <0,04 mg/L
below limit of quantification
0.5 mg/l
< 8 % *
Single value
Chloride 32,3 mg/L 250 mg/l
13 %
Single value
Clostridium perfringens (including spores) 0 KBE/100 mL 0/100 ml Single value
Colony count 22 °C 0 KBE/mL ohne anormale Veränderung Single value
Colony count 36 °C 0 KBE/mL ohne anormale Veränderung Single value
Colour farblos
Unit not stated in the document
0.5 m⁻¹ Single value
Conductivity (25 °C) 583 µS/cm 2,790 µS/cm Single value
Manganese <0,001 mg/L
below limit of quantification
50 µg/l
< 2 % *
Single value
Odour normal für den Verbraucher annehmbar Single value
pH 7,55 6,5–9,5 Single value
Sulphate 84,9 mg/L 250 mg/l
34 %
Single value
Taste normal für den Verbraucher annehmbar Single value
Temperature 13,9 °C Single value
Total organic carbon (TOC) 0,83 mg/L ohne anormale Veränderung Single value
Turbidity 0,13 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (8)

Further parameters – eime gesamt
Parameter Value Parametric value Share of the parametric value Reference
Calcium 74,9 mg/L Single value
Carbonate hardness 7,9 °dH Single value
Hardness range (WRMG) mittel Single value
Oxygen 10,2 mg/L Single value
Phosphate <0,03 mg/L
below limit of quantification
Single value
Potassium 2,1 mg/L Single value
Silicate / silicic acid 8,2 mg/L Single value
Total hardness 2,5 mmol/L Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

freden gesamt

ÜWL

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
15.8 °dH
Hardness range hard
Key values freden gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15,3 mg/l 50 mg/l
31 %
Single value
Lead 0,003 mg/l 10 µg/l
30 %
Single value
Sulphate 48 mg/l 250 mg/l
19 %
Single value
Sodium 8,1 mg/l 200 mg/l
4 %
Single value
Show all recorded parameters (84 — most recent value per parameter)

Chemical parameters (62)

Chemical parameters – freden gesamt
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,3 µg/l
below limit of quantification
3 µg/l
< 10 % *
Single value
Aldrin < 0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
AMPA < 0,05 µg/l
below limit of quantification
Single value
Antimony < 0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Atrazine < 0,02 µg/l
below limit of quantification
Single value
Bentazone < 0,05 µg/l
below limit of quantification
Single value
Benzene < 0,2 µg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Benzo(a)pyrene < 0,002 µg/l
below limit of quantification
10 ng/l
< 20 % *
Single value
Benzo(b)fluoranthene < 0,002 µg/l
below limit of quantification
Single value
Benzo(ghi)perylene < 0,002 µg/l
below limit of quantification
Single value
Benzo(k)fluoranthene < 0,002 µg/l
below limit of quantification
Single value
Bisphenol A < 0,01 µg/l
below limit of quantification
2.5 µg/l
< 0.4 % *
Single value
Boron < 0,05 mg/l
below limit of quantification
1 mg/l
< 5 % *
Single value
Bromacil < 0,02 µg/l
below limit of quantification
Single value
Bromate < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Bromodichloromethane < 0,5 µg/l
below limit of quantification
Single value
Cadmium < 0,0005 mg/l
below limit of quantification
3 µg/l
< 17 % *
Single value
Chlorate < 0,02 mg/l
below limit of quantification
70 µg/l
< 29 % *
Single value
Chloridazon < 0,05 µg/l
below limit of quantification
Single value
Chlorite < 0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value
Chlorotoluron < 0,05 µg/l
below limit of quantification
Single value
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper 0,094 mg/l 2 mg/l
5 %
Single value
Desethylatrazine < 0,02 µg/l
below limit of quantification
Single value
Desethylterbuthylazine < 0,02 µg/l
below limit of quantification
Single value
Desisopropylatrazine < 0,05 µg/l
below limit of quantification
Single value
Dibromochloromethane < 0,5 µg/l
below limit of quantification
Single value
Dichlorprop < 0,05 µg/l
below limit of quantification
Single value
Dieldrin < 0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
Diuron < 0,05 µg/l
below limit of quantification
Single value
Ethidimuron < 0,05 µg/l
below limit of quantification
Single value
Ethofumesate < 0,05 µg/l
below limit of quantification
Single value
Fluoride < 0,2 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Single value
Glyphosate < 0,05 µg/l
below limit of quantification
Single value
Heptachlor < 0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
Heptachlor epoxide < 0,01 µg/l
below limit of quantification
30 ng/l
< 33 % *
Single value
Indeno(1,2,3-cd)pyrene < 0,002 µg/l
below limit of quantification
Single value
Isoproturon < 0,05 µg/l
below limit of quantification
Single value
Lead 0,003 mg/l 10 µg/l
30 %
Single value
MCPA < 0,05 µg/l
below limit of quantification
Single value
Mecoprop < 0,05 µg/l
below limit of quantification
Single value
Mercury < 0,00005 mg/l
below limit of quantification
1 µg/l
< 5 % *
Single value
Metalaxyl < 0,05 µg/l
below limit of quantification
Single value
Metamitron < 0,05 µg/l
below limit of quantification
Single value
Metazachlor < 0,02 µg/l
below limit of quantification
Single value
Metolachlor < 0,05 µg/l
below limit of quantification
Single value
Metoxuron < 0,05 µg/l
below limit of quantification
Single value
Metribuzin < 0,05 µg/l
below limit of quantification
Single value
Nickel 0,021 mg/l 20 µg/l
105 % above the parametric value
Single value
Nitrate 15,3 mg/l 50 mg/l
31 %
Single value
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value
Oxadixyl < 0,01 µg/l
below limit of quantification
Single value
Selenium < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Simazine < 0,02 µg/l
below limit of quantification
Single value
Tebuconazole < 0,05 µg/l
below limit of quantification
Single value
Terbuthylazine < 0,02 µg/l
below limit of quantification
Single value
Tetrachloroethene < 0,1 µg/l
below limit of quantification
Single value
Tribromomethane (bromoform) < 0,5 µg/l
below limit of quantification
Single value
Trichloroethene < 0,1 µg/l
below limit of quantification
Single value
Trichloromethane (chloroform) < 0,5 µg/l
below limit of quantification
Single value
Uranium < 0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

PFAS (1)

PFAS – freden gesamt
Parameter Value Parametric value Share of the parametric value Reference
Trifluoroacetic acid (TFA) 1,3 µg/l 60 µg/l
UBA guide value
2 %
Single value

For trifluoroacetic acid (TFA), the German Drinking Water Ordinance does not specify a parametric value. The comparison is therefore made with the guide value of 60 µg/l issued by the Umweltbundesamt, which has replaced the earlier health-related guidance value of 3 µg/l. A guide value is not a legal maximum but a health-related classification.

Indicator parameters (12)

Indicator parameters – freden gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,03 mg/l 0.2 mg/l
15 %
Single value
Ammonium < 0,04 mg/l
below limit of quantification
0.5 mg/l
< 8 % *
Single value
Calcite dissolution capacity -24,283 mg/l 5 mg/l CaCO3 Single value
Chloride 10,9 mg/l 250 mg/l
4 %
Single value
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
pH 7,60 6,5–9,5 Single value
Sodium 8,1 mg/l 200 mg/l
4 %
Single value
Sulphate 48 mg/l 250 mg/l
19 %
Single value
Taste ohne Fremdgeschmack für den Verbraucher annehmbar Single value
Temperature 20,0 °C Single value
Total organic carbon (TOC) 0,5 mg/l ohne anormale Veränderung Single value
Turbidity 0,5 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – freden gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 4,27 mmol/l Single value
Base capacity to pH 8.2 0,07 mmol/l Single value
Calcium 98,2 mg/l Single value
Carbonate hardness 2,13 mmol/l Single value
Magnesium 8,95 mg/l Single value
Oxygen 9,3 mg/l Single value
Potassium 1,4 mg/l Single value
Sum of alkaline earth metals 2,8 mmol/l Single value
Total hardness 15,8 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

duingen gesamt

ÜWL

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values duingen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17,1 mg/L 50 mg/l
34 %
Single value
Escherichia coli (E. coli) 0 MPN/100 mL 0/100 ml Single value
Show all recorded parameters (25 — most recent value per parameter)

Microbiology (2)

Microbiology – duingen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 MPN/100 mL 0/100 ml Single value
Intestinal enterococci 0 KBE/100 mL 0/100 ml Single value

Chemical parameters (15)

Chemical parameters – duingen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Benzene <0,0003 mg/L
below limit of quantification
1 µg/l
< 30 % *
Single value
Bisphenol A <0,00010 mg/L
below limit of quantification
2.5 µg/l
< 4 % *
Single value
Bromate <0,003 mg/L
below limit of quantification
10 µg/l
< 30 % *
Single value
Chlorate <0,020 mg/L
below limit of quantification
70 µg/l
< 29 % *
Single value
Chlorite <0,06 mg/L
below limit of quantification
0.2 mg/l
< 30 % *
Single value
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper <0,010 mg/L
below limit of quantification
2 mg/l
< 0.5 % *
Single value
Cyanide <0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value
Fluoride 0,10 mg/L 1.5 mg/l
7 %
Single value
Mercury <0,00010 mg/L
below limit of quantification
1 µg/l
< 10 % *
Single value
Nitrate 17,1 mg/L 50 mg/l
34 %
Single value
Nitrite <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Tetrachloroethene <0,0010 mg/L
below limit of quantification
Single value
Trichloroethene <0,0009 mg/L
below limit of quantification
Single value
Trihalomethanes — Total 0,0068 mg/L 50 µg/l
14 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – duingen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Colour farblos
Unit not stated in the document
0.5 m⁻¹ Single value
Conductivity (25 °C) 583 µS/cm 2,790 µS/cm Single value
Odour normal für den Verbraucher annehmbar Single value
pH 7,55 6,5–9,5 Single value
Taste normal für den Verbraucher annehmbar Single value
Temperature 13,9 °C Single value
Turbidity keine
Unit not stated in the document
1 NTU Single value

Further parameters (1)

Further parameters – duingen gesamt
Parameter Value Parametric value Share of the parametric value Reference
Oxygen 10,2 mg/L Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Korrosionsparameter (DVGW W 551-8)

ÜWL

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14 °dH
Hardness range mittel
Key values Korrosionsparameter (DVGW W 551-8)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17,1 mg/L 50 mg/l
34 %
Single value · Korrosionsparameter (DVGW W 551-8)
Sulphate 84,9 mg/L 250 mg/l
34 %
Single value · Korrosionsparameter (DVGW W 551-8)
Show all recorded parameters (16 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Korrosionsparameter (DVGW W 551-8)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17,1 mg/L 50 mg/l
34 %
Single value · Korrosionsparameter (DVGW W 551-8)

Indicator parameters (7)

Indicator parameters – Korrosionsparameter (DVGW W 551-8)
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,017 mg/L 0.2 mg/l
9 %
Single value · Korrosionsparameter (DVGW W 551-8)
Chloride 32,3 mg/L 250 mg/l
13 %
Single value · Korrosionsparameter (DVGW W 551-8)
Conductivity (25 °C) 583 µS/cm 2,790 µS/cm Single value · Korrosionsparameter (DVGW W 551-8)
pH 7,55 6,5–9,5 Single value · Korrosionsparameter (DVGW W 551-8)
Sulphate 84,9 mg/L 250 mg/l
34 %
Single value · Korrosionsparameter (DVGW W 551-8)
Temperature 13,9 °C Single value · Korrosionsparameter (DVGW W 551-8)
Total organic carbon (TOC) 0,83 mg/L ohne anormale Veränderung Single value · Korrosionsparameter (DVGW W 551-8)

Further parameters (8)

Further parameters – Korrosionsparameter (DVGW W 551-8)
Parameter Value Parametric value Share of the parametric value Reference
Calcium 74,9 mg/L Single value · Korrosionsparameter (DVGW W 551-8)
Carbonate hardness 7,9 °dH Single value · Korrosionsparameter (DVGW W 551-8)
Hardness range (WRMG) mittel Single value · Korrosionsparameter (DVGW W 551-8)
Oxygen 10,2 mg/L Single value · Korrosionsparameter (DVGW W 551-8)
Phosphate <0,03 mg/L
below limit of quantification
Single value · Korrosionsparameter (DVGW W 551-8)
Potassium 2,1 mg/L Single value · Korrosionsparameter (DVGW W 551-8)
Silicate / silicic acid 8,2 mg/L Single value · Korrosionsparameter (DVGW W 551-8)
Total hardness 2,5 mmol/L Single value · Korrosionsparameter (DVGW W 551-8)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Anlage 3

ÜWL

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Anlage 3
Parameter Value Parametric value Share of the parametric value Reference
Sulphate 84,9 mg/L 250 mg/l
34 %
Single value · Anlage 3
Show all recorded parameters (15 — most recent value per parameter)

Indicator parameters (15)

Indicator parameters – Anlage 3
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,017 mg/L 0.2 mg/l
9 %
Single value · Anlage 3
Ammonium <0,04 mg/L
below limit of quantification
0.5 mg/l
< 8 % *
Single value · Anlage 3
Chloride 32,3 mg/L 250 mg/l
13 %
Single value · Anlage 3
Clostridium perfringens (including spores) 0 KBE/100 mL 0/100 ml Single value · Anlage 3
Colony count 22 °C 0 KBE/mL ohne anormale Veränderung Single value · Anlage 3
Colony count 36 °C 0 KBE/mL ohne anormale Veränderung Single value · Anlage 3
Conductivity (25 °C) 583 µS/cm 2,790 µS/cm Single value · Anlage 3
Manganese <0,001 mg/L
below limit of quantification
50 µg/l
< 2 % *
Single value · Anlage 3
Odour normal für den Verbraucher annehmbar Single value · Anlage 3
pH 7,55 6,5–9,5 Single value · Anlage 3
Sulphate 84,9 mg/L 250 mg/l
34 %
Single value · Anlage 3
Taste normal für den Verbraucher annehmbar Single value · Anlage 3
Temperature 13,9 °C Single value · Anlage 3
Total organic carbon (TOC) 0,83 mg/L ohne anormale Veränderung Single value · Anlage 3
Turbidity 0,13 NTU 1 NTU Single value · Anlage 3

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Niedersächsische Landesliste Pflanzenschutzmittel

ÜWL

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (32 — most recent value per parameter)

Chemical parameters (25)

Chemical parameters – Niedersächsische Landesliste Pflanzenschutzmittel
Parameter Value Parametric value Share of the parametric value Reference
2,6-Dichlorobenzamide (BAM) <0,000050 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
AMPA <0,000070 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Atrazine <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Bentazone <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Bromacil <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Chloridazon <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Chlorotoluron <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Dichlorprop <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Diuron <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Ethidimuron <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Ethofumesate <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Glyphosate <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Isoproturon <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
MCPA <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Mecoprop <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Metalaxyl <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Metamitron <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Metazachlor <0,000050 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Metolachlor <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Metoxuron <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Metribuzin <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Oxadixyl <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Simazine <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Tebuconazole <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Terbuthylazine <0,000030 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel

PFAS (1)

PFAS – Niedersächsische Landesliste Pflanzenschutzmittel
Parameter Value Parametric value Share of the parametric value Reference
Trifluoroacetic acid (TFA) 0,00082 mg/L 60 µg/l
UBA guide value
1 %
Single value · Niedersächsische Landesliste Pflanzenschutzmittel

For trifluoroacetic acid (TFA), the German Drinking Water Ordinance does not specify a parametric value. The comparison is therefore made with the guide value of 60 µg/l issued by the Umweltbundesamt, which has replaced the earlier health-related guidance value of 3 µg/l. A guide value is not a legal maximum but a health-related classification.

Metabolites (6)

Metabolites – Niedersächsische Landesliste Pflanzenschutzmittel
Parameter Value Parametric value Share of the parametric value Reference
Desphenyl-chloridazon 0,00026 mg/L Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Dimethachlor acid CGA 50266 <0,000050 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Dimethachlor sulfonic acid CGA 354742 <0,000050 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Dimethenamid sulfonic acid M27 <0,000050 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Flufenacet sulfonic acid M2 <0,000050 mg/L
below limit of quantification
Single value · Niedersächsische Landesliste Pflanzenschutzmittel
Methyl-desphenyl-chloridazon 0,000052 mg/L Single value · Niedersächsische Landesliste Pflanzenschutzmittel

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Analyse auf Schwermetalle

ÜWL

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Analyse auf Schwermetalle
Parameter Value Parametric value Share of the parametric value Reference
Copper <0,010 mg/L
below limit of quantification
2 mg/l
< 0.5 % *
Single value · Analyse auf Schwermetalle

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 31008

How hard is the water in Postcode 31008?
ÜWL publishes a total hardness of 2.6 °dH for the supply zone lamspringe gesamt (hardness range soft). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
How much nitrate is in the drinking water in Postcode 31008?
ÜWL publishes a nitrate value of 7,2 mg/l for the supply zone lamspringe gesamt. The statutory parametric value is 50 mg/l; the measured value represents 14 % of the parametric value. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Who supplies the drinking water in Postcode 31008?
ÜWL. The values shown here come from the supply zone lamspringe gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.