Drinking water in 29413
For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 3 underneath.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | <1,0 mg/l below limit of quantification | 50 mg/l | < 2 % * | Mean |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Mean |
| Sulphate | 59 mg/l | 250 mg/l | 24 % | Mean |
| Sodium | 10,7 mg/l | 200 mg/l | 5 % | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (45 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Mean |
| Intestinal enterococci | 0 KBE/100 ml | 0/100 ml | — | Mean |
Chemical parameters (21)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,00050 mg/l below limit of quantification | 3 µg/l | < 17 % * | Mean |
| Antimony | < 0,0010 mg/l below limit of quantification | 5 µg/l | < 20 % * | Mean |
| Arsenic | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Benzene | <0,00030 mg/l below limit of quantification | 1 µg/l | < 30 % * | Mean |
| Benzo(a)pyrene | <0,0000025 mg/l below limit of quantification | 10 ng/l | < 25 % * | Mean |
| Bisphenol A | <0,00010 mg/l below limit of quantification | 2.5 µg/l | < 4 % * | Mean |
| Boron | < 0,100 mg/l below limit of quantification | 1 mg/l | < 10 % * | Mean |
| Cadmium | < 0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Mean |
| Chromium | < 0,000050 mg/l below limit of quantification | 25 µg/l | < 0.2 % * | Mean |
| Copper | < 0,0020 mg/l below limit of quantification | 2 mg/l | < 0.1 % * | Mean |
| Cyanide | < 0,010 mg/l below limit of quantification | 50 µg/l | < 20 % * | Mean |
| Fluoride | < 0,20 mg/l below limit of quantification | 1.5 mg/l | < 13 % * | Mean |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Mercury | < 0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Mean |
| Nickel | < 0,0020 mg/l below limit of quantification | 20 µg/l | < 10 % * | Mean |
| Nitrate | <1,0 mg/l below limit of quantification | 50 mg/l | < 2 % * | Mean |
| Nitrite | <0,010 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Mean |
| Polycyclic aromatic hydrocarbons | <0,000025 mg/l below limit of quantification | 0.1 µg/l | < 25 % * | Mean |
| Selenium | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Uranium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Vinyl chloride | <0,00015 mg/l below limit of quantification | 0.5 µg/l | < 30 % * | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (14)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,020 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Mean |
| Ammonium | < 0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Mean |
| Calcite dissolution capacity | -0,02 mmol/l CaCO3 | 5 mg/l CaCO3 | — | Mean |
| Chloride | 23,0 mg/l | 250 mg/l | 9 % | Mean |
| Coliform bacteria | 0 KBE/100 ml | 0/100 ml | — | Mean |
| Colony count 22 °C | 0 KBE/ml | ohne anormale Veränderung | — | Mean |
| Colony count 36 °C | 0 KBE/ml | ohne anormale Veränderung | — | Mean |
| Iron | <0,010 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Mean |
| Manganese | <0,002 mg/l below limit of quantification | 50 µg/l | < 4 % * | Mean |
| Oxidisability | 0,7 mg/l O2 | 5 mg/l O2 | — | Mean |
| Sodium | 10,7 mg/l | 200 mg/l | 5 % | Mean |
| Sulphate | 59 mg/l | 250 mg/l | 24 % | Mean |
| Total organic carbon (TOC) | 1,04 mg/l C | ohne anormale Veränderung | — | Mean |
| Turbidity | 0,30 NTU | 1 NTU | — | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 1,91 mmol/l | — | — | Mean |
| Base capacity to pH 8.2 | 0,03 mmol/l | — | — | Mean |
| Calcium | 59,7 mg/l | — | — | Mean |
| Hardness range (WRMG) | mittel weich/mittel/hart | — | — | Mean |
| Magnesium | 4,1 mg/l | — | — | Mean |
| Potassium | 1,0 mg/l | — | — | Mean |
| Silicate / silicic acid | 14,3 mg/l | — | — | Mean |
| Total hardness | 9,3 °dH | — | — | Mean |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Show 3 more supply zones in this postcode
WVG WW Siedenlangenbeck
WVG WW SiedenlangenbeckAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sulphate | 32,518 mg/l | 250 mg/l | 13 % | Mean · WVG WW Siedenlangenbeck |
| Sodium | 8,47 mg/l | 200 mg/l | 4 % | Mean · WVG WW Siedenlangenbeck |
Show all recorded parameters (6 — most recent value per parameter)
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Copper | 0,0036 mg/l | 2 mg/l | 0.2 % | Mean · WVG WW Siedenlangenbeck |
Indicator parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | 0,01 mg/l | 0.5 mg/l | 2 % | Mean · WVG WW Siedenlangenbeck |
| Chloride | 17,688 mg/l | 250 mg/l | 7 % | Mean · WVG WW Siedenlangenbeck |
| Iron | 0,0282 mg/l | 0.2 mg/l | 14 % | Mean · WVG WW Siedenlangenbeck |
| Sodium | 8,47 mg/l | 200 mg/l | 4 % | Mean · WVG WW Siedenlangenbeck |
| Sulphate | 32,518 mg/l | 250 mg/l | 13 % | Mean · WVG WW Siedenlangenbeck |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
WVG WW Nipkendey
WVG WW NipkendeyAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sulphate | 64,15 mg/l | 250 mg/l | 26 % | Mean · WVG WW Nipkendey |
| Sodium | 13,96 mg/l | 200 mg/l | 7 % | Mean · WVG WW Nipkendey |
Show all recorded parameters (5 — most recent value per parameter)
Indicator parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | 0,01 mg/l | 0.5 mg/l | 2 % | Mean · WVG WW Nipkendey |
| Chloride | 23,2 mg/l | 250 mg/l | 9 % | Mean · WVG WW Nipkendey |
| Iron | 0,032 mg/l | 0.2 mg/l | 16 % | Mean · WVG WW Nipkendey |
| Sodium | 13,96 mg/l | 200 mg/l | 7 % | Mean · WVG WW Nipkendey |
| Sulphate | 64,15 mg/l | 250 mg/l | 26 % | Mean · WVG WW Nipkendey |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
WVG WW Diesdorf
WVG WW DiesdorfAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sulphate | 67,105 mg/l | 250 mg/l | 27 % | Mean · WVG WW Diesdorf |
| Sodium | 11,3 mg/l | 200 mg/l | 6 % | Mean · WVG WW Diesdorf |
Show all recorded parameters (4 — most recent value per parameter)
Indicator parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 25,605 mg/l | 250 mg/l | 10 % | Mean · WVG WW Diesdorf |
| Iron | 0,035 mg/l | 0.2 mg/l | 18 % | Mean · WVG WW Diesdorf |
| Sodium | 11,3 mg/l | 200 mg/l | 6 % | Mean · WVG WW Diesdorf |
| Sulphate | 67,105 mg/l | 250 mg/l | 27 % | Mean · WVG WW Diesdorf |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 29413
- How hard is the water in Postcode 29413?
- Verband Kommunaler Wasserversorgung und Abwasserbehandlung (VKWA) Salzwedel publishes a total hardness of 9.3 °dH for the supply zone Diesdorf (hardness range mittel). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 15.06.2026, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Postcode 29413?
- Verband Kommunaler Wasserversorgung und Abwasserbehandlung (VKWA) Salzwedel publishes a nitrate value of <1,0 mg/l for the supply zone Diesdorf. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: 15.06.2026, retrieved on 11/07/2026.
- Who supplies the drinking water in Postcode 29413?
- Verband Kommunaler Wasserversorgung und Abwasserbehandlung (VKWA) Salzwedel. The values shown here come from the supply zone Diesdorf and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.