Drinking water in 25348
One supply zone, water supplier: Stadtwerke Glückstadt (Wasserwerk Krempermoor).
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Wasserwerk Krempermoor
Stadtwerke Glückstadt (Wasserwerk Krempermoor)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 2,0 mg/l | 50 mg/l | 4 % | Single value |
| Lead | <1 µg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 MPN/100ml | 0/100 ml | — | Single value |
| Sodium | 41,6 mg/l | 200 mg/l | 21 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (74 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 MPN/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
Chemical parameters (48)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-Dichloropropane | <30 ng/l below limit of quantification | — | — | Single value |
| 2,6-Dichlorobenzamide (BAM) | <30 ng/l below limit of quantification | — | — | Single value |
| AMPA | <50 ng/l below limit of quantification | — | — | Single value |
| Antimony | <0,1 µg/l below limit of quantification | 5 µg/l | < 2 % * | Single value |
| Arsenic | <0,5 µg/l below limit of quantification | 10 µg/l | < 5 % * | Single value |
| Atrazine | <30 ng/l below limit of quantification | — | — | Single value |
| Bentazone | 34 ng/l | — | — | Single value |
| Benzo(a)pyrene | <3,0 ng/l below limit of quantification | 10 ng/l | < 30 % * | Single value |
| Benzo(b)fluoranthene | <5,0 ng/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <10 ng/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <5,0 ng/l below limit of quantification | — | — | Single value |
| Bisphenol A | <50 ng/l below limit of quantification | 2.5 µg/l | < 2 % * | Single value |
| Boron | <0,05 mg/l below limit of quantification | 1 mg/l | < 5 % * | Single value |
| Bromacil | <30 ng/l below limit of quantification | — | — | Single value |
| Cadmium | <0,1 µg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Chloridazon | <30 ng/l below limit of quantification | — | — | Single value |
| Chlorotoluron | <30 ng/l below limit of quantification | — | — | Single value |
| Chromium | <0,5 µg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | <1 µg/l below limit of quantification | 2 mg/l | < < 0.1 % * | Single value |
| Desethylatrazine | <30 ng/l below limit of quantification | — | — | Single value |
| Desisopropylatrazine | <30 ng/l below limit of quantification | — | — | Single value |
| Dimethachlor sulfonic acid | <30 ng/l below limit of quantification | — | — | Single value |
| Dimethenamid | <30 ng/l below limit of quantification | — | — | Single value |
| Diuron | <30 ng/l below limit of quantification | — | — | Single value |
| Flufenacet | <30 ng/l below limit of quantification | — | — | Single value |
| Fluoride | 0,15 mg/l | 1.5 mg/l | 10 % | Single value |
| Glyphosate | <30 ng/l below limit of quantification | — | — | Single value |
| Haloacetic acids (HAA) | 0,00 µg/l | 60 µg/l | 0 % | Single value |
| Imidacloprid | <30 ng/l below limit of quantification | — | — | Single value |
| Isoproturon | <30 ng/l below limit of quantification | — | — | Single value |
| Lead | <1 µg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mecoprop | <30 ng/l below limit of quantification | — | — | Single value |
| Mercury | <0,1 µg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metazachlor acid | <30 ng/l below limit of quantification | — | — | Single value |
| Metazachlor sulfonic acid | <30 ng/l below limit of quantification | — | — | Single value |
| Metolachlor | <30 ng/l below limit of quantification | — | — | Single value |
| Metolachlor acid | <30 ng/l below limit of quantification | — | — | Single value |
| Metolachlor sulfonic acid | <30 ng/l below limit of quantification | — | — | Single value |
| Nickel | <1 µg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nicosulfuron | <30 ng/l below limit of quantification | — | — | Single value |
| Nitrate | 2,0 mg/l | 50 mg/l | 4 % | Single value |
| Nitrite | <0,010 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Oxadixyl | <30 ng/l below limit of quantification | — | — | Single value |
| Polycyclic aromatic hydrocarbons | 0 µg/l | 0.1 µg/l | 0 % | Single value |
| Selenium | <1 µg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Simazine | <30 ng/l below limit of quantification | — | — | Single value |
| Tebuconazole | <30 ng/l below limit of quantification | — | — | Single value |
| Uranium | 0,2 µg/l | 10 µg/l | 2 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Trifluoroacetic acid (TFA) | 260 ng/l | 60 µg/l UBA guide value | 0.4 % | Single value |
For trifluoroacetic acid (TFA), the German Drinking Water Ordinance does not specify a parametric value. The comparison is therefore made with the guide value of 60 µg/l issued by the Umweltbundesamt, which has replaced the earlier health-related guidance value of 3 µg/l. A guide value is not a legal maximum but a health-related classification.
Indicator parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value |
| Coliform bacteria | 0 MPN/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 1 KBE/ml | ohne anormale Veränderung | — | Single value |
| Iron | <0,010 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Odour | geruchlos | für den Verbraucher annehmbar | — | Single value |
| pH | 7,25 | 6,5–9,5 | — | Single value |
| Sodium | 41,6 mg/l | 200 mg/l | 21 % | Single value |
| Turbidity | 0,093 NTU | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (12)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 3,89 mmol/l | — | — | Single value |
| Calcium | 84 mg/l | — | — | Single value |
| Carbonate hardness | 10,9 °dH | — | — | Single value |
| Free carbon dioxide | 19,0 mg/l | — | — | Single value |
| Hydrogen carbonate | 233,5 mg/l | — | — | Single value |
| Magnesium | 7 mg/l | — | — | Single value |
| Oxygen | 11,75 mg/l | — | — | Single value |
| Phosphate | <0,050 mg/l below limit of quantification | — | — | Single value |
| Potassium | 3,4 mg/l | — | — | Single value |
| Silicate / silicic acid | 17 mg/l | — | — | Single value |
| Total hardness | 13,3 °dH | — | — | Single value |
| Zinc | <10 µg/l below limit of quantification | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 25348
- How hard is the water in Postcode 25348?
- Stadtwerke Glückstadt (Wasserwerk Krempermoor) publishes a total hardness of 13.3 °dH for the supply zone Wasserwerk Krempermoor (hardness range medium). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 09.04.2026, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Postcode 25348?
- Stadtwerke Glückstadt (Wasserwerk Krempermoor) publishes a nitrate value of 2,0 mg/l for the supply zone Wasserwerk Krempermoor. The statutory parametric value is 50 mg/l; the measured value represents 4 % of the parametric value. Basis: 09.04.2026, retrieved on 11/07/2026.
- Who supplies the drinking water in Postcode 25348?
- Stadtwerke Glückstadt (Wasserwerk Krempermoor). The values shown here come from the supply zone Wasserwerk Krempermoor and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.