Skip to content
maunawai.info

Drinking water in 22941

One supply zone, water supplier: Holsteiner Wasser GmbH (Wasserwerk Bargteheide).

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
11.4 °dH
Hardness range medium
Key values Grundwasserwerk Bargteheide
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 mg/l Mean
Nitrate 0,8 mg/l 50 mg/l
2 %
Mean
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Escherichia coli (E. coli) 0 /100 ml 0/100 ml Maximum · Median 0
Sulphate 13 mg/l 250 mg/l
5 %
Mean
Sodium 12,6 mg/l 200 mg/l
6 %
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (54 — most recent value per parameter)

Microbiology (2)

Microbiology – Grundwasserwerk Bargteheide
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 /100 ml 0/100 ml Maximum · Median 0
Intestinal enterococci 0 /100 ml 0/100 ml Maximum · Median 0

Chemical parameters (25)

Chemical parameters – Grundwasserwerk Bargteheide
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Mean
Antimony < 0,0001 mg/l
below limit of quantification
5 µg/l
< 2 % *
Mean
Arsenic 0,0005 mg/l 10 µg/l
5 %
Mean
Benzene < 0,0003 mg/l
below limit of quantification
1 µg/l
< 30 % *
Mean
Benzo(a)pyrene < 0,000003 mg/l
below limit of quantification
10 ng/l
< 30 % *
Mean
Bisphenol A < 0,00005 mg/l
below limit of quantification
2.5 µg/l
< 2 % *
Mean
Boron < 0,05 mg/l
below limit of quantification
1 mg/l
< 5 % *
Mean
Bromate < 0,003 mg/l
below limit of quantification
10 µg/l
< 30 % *
Mean
Cadmium < 0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Mean
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Mean
Copper < 0,001 mg/l
below limit of quantification
2 mg/l
< < 0.1 % *
Mean
Cyanide < 0,004 mg/l
below limit of quantification
50 µg/l
< 8 % *
Mean
Fluoride 0,16 mg/l 1.5 mg/l
11 %
Mean
Haloacetic acids (HAA) 0 mg/l Mean
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Mean
Nickel < 0,001 mg/l
below limit of quantification
20 µg/l
< 5 % *
Mean
Nitrate 0,8 mg/l 50 mg/l
2 %
Mean
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Mean
Pesticides — Total 0 mg/l 0.5 µg/l
0 %
Mean
Polycyclic aromatic hydrocarbons 0 mg/l 0.1 µg/l
0 %
Mean
Selenium < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Tetrachloroethene and Trichloroethene (sum) 0 mg/l 10 µg/l
0 %
Mean
Trihalomethanes — Total 0 mg/l 50 µg/l
0 %
Mean
Uranium < 0,0001 mg/l
below limit of quantification
10 µg/l
< 1 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Grundwasserwerk Bargteheide
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 mg/l Mean

Indicator parameters (17)

Indicator parameters – Grundwasserwerk Bargteheide
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean
Ammonium 0,17 mg/l 0.5 mg/l
34 %
Mean
Calcite dissolution capacity -5,37 mg/l 5 mg/l CaCO3 Mean
Chloride 18 mg/l 250 mg/l
7 %
Mean
Coliform bacteria 1 /100 ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0

Note from the water supplier in the document: 1) Bei den gefundenen coliformen Bakterien handelte es sich nachweislich um solche, die natürlicher Weise im Wasser leben und sich dort vermehren können. Einen Hinweis auf eine Hygienegefährdung gab es nicht. Nachbeprobungen konnten bestätigen, dass das aufbereitete Trinkwasser eine einwandfreie Qualität besitzt. Lesen Sie nähere Informationen zum Thema „Umwelt-Coliforme“ auf unserer Website -> Service -> Wasserqualität -> Umwelt-Coliforme im Trinkwasser.

Colony count 22 °C 0 /ml ohne anormale Veränderung Mean
Colony count 36 °C 0 /ml ohne anormale Veränderung Mean
Colour 0,2 1/m 0.5 m⁻¹ Mean
Conductivity (25 °C) 441 µS/cm 2,790 µS/cm Mean
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean
Manganese 0,014 mg/l 50 µg/l
28 %
Mean
pH 7,53 - 6,5–9,5 Mean
Sodium 12,6 mg/l 200 mg/l
6 %
Mean
Sulphate 13 mg/l 250 mg/l
5 %
Mean
Temperature 10 °C Mean
Total organic carbon (TOC) 1,65 mg/l ohne anormale Veränderung Mean
Turbidity 0,1 NTU 1 NTU Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Further parameters (9)

Further parameters – Grundwasserwerk Bargteheide
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3,79 mmol/l Mean
Base capacity to pH 8.2 0,23 mmol/l Mean
Calcium 71 mg/l Mean
Carbonate hardness 10,7 °dH Mean
Magnesium 6 mg/l Mean
Oxygen 10,9 mg/l Mean
Potassium 1,2 mg/l Mean
Total hardness 11,35 °dH Mean
Zinc < 0,01 mg/l
below limit of quantification
Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 22941

How hard is the water in Postcode 22941?
Holsteiner Wasser GmbH (Wasserwerk Bargteheide) publishes a total hardness of 11.4 °dH for the supply zone Grundwasserwerk Bargteheide (hardness range medium). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 08/07/2026.
How much nitrate is in the drinking water in Postcode 22941?
Holsteiner Wasser GmbH (Wasserwerk Bargteheide) publishes a nitrate value of 0,8 mg/l for the supply zone Grundwasserwerk Bargteheide. The statutory parametric value is 50 mg/l; the measured value represents 2 % of the parametric value. Basis: Publication by the water supplier, retrieved on 08/07/2026.
Who supplies the drinking water in Postcode 22941?
Holsteiner Wasser GmbH (Wasserwerk Bargteheide). The values shown here come from the supply zone Grundwasserwerk Bargteheide and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.