Who supplies the drinking water in Postcode 15299?

FWA Frankfurter Wasser- und Abwassergesellschaft mbH. The values shown here come from the supply zone Müllrose and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in 15299

For this postcode FWA Frankfurter Wasser- und Abwassergesellschaft mbH publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Müllrose

FWA Frankfurter Wasser- und Abwassergesellschaft mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Key values Müllrose
Parameter	Value	Parametric value	Share of the parametric value	Reference
Escherichia coli (E. coli)	0 KBE/100 ml	0/100 ml	—	Mean · Müllrose

Show all recorded parameters (12 — most recent value per parameter)

Microbiology (2)

Microbiology – Müllrose
Parameter	Value	Parametric value	Share of the parametric value	Reference
Escherichia coli (E. coli)	0 KBE/100 ml	0/100 ml	—	Mean · Müllrose
Intestinal enterococci	0 KBE/100 ml	0/100 ml	—	Mean · Müllrose

Indicator parameters (10)

Indicator parameters – Müllrose
Parameter	Value	Parametric value	Share of the parametric value	Reference
Ammonium	<0,05 mg/l below limit of quantification	0.5 mg/l	< 10 % *	Mean · Müllrose
Coliform bacteria	0 KBE/100 ml	0/100 ml	—	Mean · Müllrose
Colour	0,1 1/m	0.5 m⁻¹	—	Mean · Müllrose
Iron	0,01 mg/l	0.2 mg/l	5 %	Mean · Müllrose
Manganese	<0,005 mg/l below limit of quantification	50 µg/l	< 10 % *	Mean · Müllrose
Odour	ohne	für den Verbraucher annehmbar	—	Mean · Müllrose
pH	7,33	6,5–9,5	—	Mean · Müllrose
Taste	ohne	für den Verbraucher annehmbar	—	Mean · Müllrose
Temperature	8,9 °C	—	—	Mean · Müllrose
Turbidity	0,03 NTU	1 NTU	—	Mean · Müllrose

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.fwa-ffo.de/wp2/trinkwasser/wasserqualitaet/ · retrieved on 13/07/2026

Show 1 more supply zone in this postcode

Briesen

FWA Frankfurter Wasser- und Abwassergesellschaft mbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

Hardness range 18,63

Key values Briesen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Sum of PFAS	<0,000005 mg/l below limit of quantification	0.1 µg/l	< 5 % *	Mean · Briesen
Nitrate	0,79 mg/l	50 mg/l	2 %	Mean · Briesen
Escherichia coli (E. coli)	0 KBE/100 ml	0/100 ml	—	Mean · Briesen
Sulphate	198 mg/l	250 mg/l	79 %	Mean · Briesen
Sodium	31 mg/l	200 mg/l	16 %	Mean · Briesen

Show all recorded parameters (79 — most recent value per parameter)

Microbiology (2)

Microbiology – Briesen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Escherichia coli (E. coli)	0 KBE/100 ml	0/100 ml	—	Mean · Briesen
Intestinal enterococci	0 KBE/100 ml	0/100 ml	—	Mean · Briesen

Chemical parameters (35)

Chemical parameters – Briesen
Parameter	Value	Parametric value	Share of the parametric value	Reference
1,2-dichloroethane	<0,0003 mg/l below limit of quantification	3 µg/l	< 10 % *	Mean · Briesen
1,2-Dichloropropane	<0,0001 mg/l below limit of quantification	—	—	Mean · Briesen
Acrylamide	<0,00005 mg/l below limit of quantification	0.1 µg/l	< 50 % *	Mean · Briesen
AMPA	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Atrazine	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Bentazone	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Benzene	<0,0003 mg/l below limit of quantification	1 µg/l	< 30 % *	Mean · Briesen
Boron	0,052 mg/l	1 mg/l	5 %	Mean · Briesen
Bromacil	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Bromate	0,005 mg/l	10 µg/l	50 %	Mean · Briesen
Chromium	0,0012 mg/l	25 µg/l	5 %	Mean · Briesen
Cyanide	<0,005 mg/l below limit of quantification	50 µg/l	< 10 % *	Mean · Briesen
Desethylatrazine	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Desisopropylatrazine	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Diuron	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Ethidimuron	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Fluoride	0,12 mg/l	1.5 mg/l	8 %	Mean · Briesen
Glyphosate	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Hexazinone	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Isoproturon	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
MCPA	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Mecoprop	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Mercury	<0,0001 mg/l below limit of quantification	1 µg/l	< 10 % *	Mean · Briesen
Metalaxyl	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Metazachlor	0,00006 mg/l	—	—	Mean · Briesen
Metazachlor acid	0,00005 mg/l	—	—	Mean · Briesen
Metolachlor	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Nitrate	0,79 mg/l	50 mg/l	2 %	Mean · Briesen
Pesticides — Total	0,00012 mg/l	0.5 µg/l	24 %	Mean · Briesen
Selenium	<0,001 mg/l below limit of quantification	10 µg/l	< 10 % *	Mean · Briesen
Simazine	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Terbuthylazine	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen
Tetrachloroethene	<0,0001 mg/l below limit of quantification	—	—	Mean · Briesen
Trichloroethene	<0,0001 mg/l below limit of quantification	—	—	Mean · Briesen
Uranium	0,0004 mg/l	10 µg/l	4 %	Mean · Briesen

PFAS (16)

PFAS – Briesen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Perfluorobutane sulfonic acid (PFBS)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluorobutanoic acid (PFBA)	0,000026 mg/l	—	—	Mean · Briesen
Perfluorodecane sulfonic acid (PFDS)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluorododecane sulfonic acid (PFDoDS)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluoroheptane sulfonic acid (PFHpS)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluoroheptanoic acid (PFHpA)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluorohexane sulfonic acid (PFHxS)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluorohexanoic acid (PFHxA)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluorononane sulfonic acid (PFNS)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluorononanoic acid (PFNA)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluorooctanesulfonic acid (PFOS)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluorooctanoic acid (PFOA)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluoropentanesulfonic acid (PFPeS)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluoropentanoic acid (PFPeA)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Perfluorotridecanesulfonic acid (PFTrDS)	<0,000005 mg/l below limit of quantification	—	—	Mean · Briesen
Sum of PFAS	<0,000005 mg/l below limit of quantification	0.1 µg/l	< 5 % *	Mean · Briesen

Metabolites (1)

Metabolites – Briesen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Desphenyl-chloridazon	<0,00005 mg/l below limit of quantification	—	—	Mean · Briesen

Indicator parameters (18)

Indicator parameters – Briesen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Ammonium	<0,05 mg/l below limit of quantification	0.5 mg/l	< 10 % *	Mean · Briesen
Calcite dissolution capacity	-2,5 mg CaCO3/l	5 mg/l CaCO3	—	Mean · Briesen
Chloride	40 mg/l	250 mg/l	16 %	Mean · Briesen
Clostridium perfringens (including spores)	0 KBE/100 ml	0/100 ml	—	Mean · Briesen
Coliform bacteria	0 KBE/100 ml	0/100 ml	—	Mean · Briesen
Colony count 22 °C	0 KBE/1 ml	ohne anormale Veränderung	—	Mean · Briesen
Colony count 36 °C	0 KBE/1 ml	ohne anormale Veränderung	—	Mean · Briesen
Colour	0,2 1/m	0.5 m⁻¹	—	Mean · Briesen
Iron	0,0122 mg/l	0.2 mg/l	6 %	Mean · Briesen
Manganese	<0,002 mg/l below limit of quantification	50 µg/l	< 4 % *	Mean · Briesen
Odour	ohne	für den Verbraucher annehmbar	—	Mean · Briesen
pH	7,49	6,5–9,5	—	Mean · Briesen
Sodium	31 mg/l	200 mg/l	16 %	Mean · Briesen
Sulphate	198 mg/l	250 mg/l	79 %	Mean · Briesen
Taste	ohne	für den Verbraucher annehmbar	—	Mean · Briesen
Temperature	12,4 °C	—	—	Mean · Briesen
Total organic carbon (TOC)	4,2 mg/l	ohne anormale Veränderung	—	Mean · Briesen
Turbidity	0,08 NTU	1 NTU	—	Mean · Briesen

Further parameters (7)

Further parameters – Briesen
Parameter	Value	Parametric value	Share of the parametric value	Reference
Acid capacity to pH 4.3	2,95 mmol/l	—	—	Mean · Briesen
Base capacity to pH 8.2	0,24 mmol/l	—	—	Mean · Briesen
Hardness range (WRMG)	18,63 °dH	—	—	Mean · Briesen
Magnesium	14,5 mg/l	—	—	Mean · Briesen
Phosphate	<0,1 mg/l below limit of quantification	—	—	Mean · Briesen
Potassium	5,19 mg/l	—	—	Mean · Briesen
Saturation index	0,068	—	—	Mean · Briesen

Source: https://www.fwa-ffo.de/wp2/trinkwasser/wasserqualitaet/ · retrieved on 13/07/2026

Frequent questions about postcode 15299

Who supplies the drinking water in Postcode 15299?: FWA Frankfurter Wasser- und Abwassergesellschaft mbH. The values shown here come from the supply zone Müllrose and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.