Drinking water in 15236
For this postcode FWA Frankfurter Wasser- und Abwassergesellschaft mbH publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of PFAS | <0,000005 mg/l below limit of quantification | 0.1 µg/l | < 5 % * | Mean · Briesen |
| Nitrate | 0,79 mg/l | 50 mg/l | 2 % | Mean · Briesen |
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Mean · Briesen |
| Sulphate | 198 mg/l | 250 mg/l | 79 % | Mean · Briesen |
| Sodium | 31 mg/l | 200 mg/l | 16 % | Mean · Briesen |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (79 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Mean · Briesen |
| Intestinal enterococci | 0 KBE/100 ml | 0/100 ml | — | Mean · Briesen |
Chemical parameters (35)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Mean · Briesen |
| 1,2-Dichloropropane | <0,0001 mg/l below limit of quantification | — | — | Mean · Briesen |
| Acrylamide | <0,00005 mg/l below limit of quantification | 0.1 µg/l | < 50 % * | Mean · Briesen |
| AMPA | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Atrazine | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Bentazone | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Benzene | <0,0003 mg/l below limit of quantification | 1 µg/l | < 30 % * | Mean · Briesen |
| Boron | 0,052 mg/l | 1 mg/l | 5 % | Mean · Briesen |
| Bromacil | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Bromate | 0,005 mg/l | 10 µg/l | 50 % | Mean · Briesen |
| Chromium | 0,0012 mg/l | 25 µg/l | 5 % | Mean · Briesen |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Mean · Briesen |
| Desethylatrazine | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Desisopropylatrazine | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Diuron | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Ethidimuron | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Fluoride | 0,12 mg/l | 1.5 mg/l | 8 % | Mean · Briesen |
| Glyphosate | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Hexazinone | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Isoproturon | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| MCPA | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Mecoprop | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Mean · Briesen |
| Metalaxyl | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Metazachlor | 0,00006 mg/l | — | — | Mean · Briesen |
| Metazachlor acid | 0,00005 mg/l | — | — | Mean · Briesen |
| Metolachlor | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Nitrate | 0,79 mg/l | 50 mg/l | 2 % | Mean · Briesen |
| Pesticides — Total | 0,00012 mg/l | 0.5 µg/l | 24 % | Mean · Briesen |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean · Briesen |
| Simazine | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Terbuthylazine | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Tetrachloroethene | <0,0001 mg/l below limit of quantification | — | — | Mean · Briesen |
| Trichloroethene | <0,0001 mg/l below limit of quantification | — | — | Mean · Briesen |
| Uranium | 0,0004 mg/l | 10 µg/l | 4 % | Mean · Briesen |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (16)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluorobutanoic acid (PFBA) | 0,000026 mg/l | — | — | Mean · Briesen |
| Perfluorodecane sulfonic acid (PFDS) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluorododecane sulfonic acid (PFDoDS) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluoroheptane sulfonic acid (PFHpS) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluoroheptanoic acid (PFHpA) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluorohexane sulfonic acid (PFHxS) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluorohexanoic acid (PFHxA) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluorononane sulfonic acid (PFNS) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluorononanoic acid (PFNA) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluorooctanesulfonic acid (PFOS) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluorooctanoic acid (PFOA) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluoropentanesulfonic acid (PFPeS) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluoropentanoic acid (PFPeA) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Perfluorotridecanesulfonic acid (PFTrDS) | <0,000005 mg/l below limit of quantification | — | — | Mean · Briesen |
| Sum of PFAS | <0,000005 mg/l below limit of quantification | 0.1 µg/l | < 5 % * | Mean · Briesen |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Metabolites (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Desphenyl-chloridazon | <0,00005 mg/l below limit of quantification | — | — | Mean · Briesen |
Indicator parameters (18)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Mean · Briesen |
| Calcite dissolution capacity | -2,5 mg CaCO3/l | 5 mg/l CaCO3 | — | Mean · Briesen |
| Chloride | 40 mg/l | 250 mg/l | 16 % | Mean · Briesen |
| Clostridium perfringens (including spores) | 0 KBE/100 ml | 0/100 ml | — | Mean · Briesen |
| Coliform bacteria | 0 KBE/100 ml | 0/100 ml | — | Mean · Briesen |
| Colony count 22 °C | 0 KBE/1 ml | ohne anormale Veränderung | — | Mean · Briesen |
| Colony count 36 °C | 0 KBE/1 ml | ohne anormale Veränderung | — | Mean · Briesen |
| Colour | 0,2 1/m | 0.5 m⁻¹ | — | Mean · Briesen |
| Iron | 0,0122 mg/l | 0.2 mg/l | 6 % | Mean · Briesen |
| Manganese | <0,002 mg/l below limit of quantification | 50 µg/l | < 4 % * | Mean · Briesen |
| Odour | ohne | für den Verbraucher annehmbar | — | Mean · Briesen |
| pH | 7,49 | 6,5–9,5 | — | Mean · Briesen |
| Sodium | 31 mg/l | 200 mg/l | 16 % | Mean · Briesen |
| Sulphate | 198 mg/l | 250 mg/l | 79 % | Mean · Briesen |
| Taste | ohne | für den Verbraucher annehmbar | — | Mean · Briesen |
| Temperature | 12,4 °C | — | — | Mean · Briesen |
| Total organic carbon (TOC) | 4,2 mg/l | ohne anormale Veränderung | — | Mean · Briesen |
| Turbidity | 0,08 NTU | 1 NTU | — | Mean · Briesen |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 2,95 mmol/l | — | — | Mean · Briesen |
| Base capacity to pH 8.2 | 0,24 mmol/l | — | — | Mean · Briesen |
| Hardness range (WRMG) | 18,63 °dH | — | — | Mean · Briesen |
| Magnesium | 14,5 mg/l | — | — | Mean · Briesen |
| Phosphate | <0,1 mg/l below limit of quantification | — | — | Mean · Briesen |
| Potassium | 5,19 mg/l | — | — | Mean · Briesen |
| Saturation index | 0,068 | — | — | Mean · Briesen |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Show 1 more supply zone in this postcode
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Mean · Müllrose |
Show all recorded parameters (12 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Mean · Müllrose |
| Intestinal enterococci | 0 KBE/100 ml | 0/100 ml | — | Mean · Müllrose |
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Mean · Müllrose |
| Coliform bacteria | 0 KBE/100 ml | 0/100 ml | — | Mean · Müllrose |
| Colour | 0,1 1/m | 0.5 m⁻¹ | — | Mean · Müllrose |
| Iron | 0,01 mg/l | 0.2 mg/l | 5 % | Mean · Müllrose |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Mean · Müllrose |
| Odour | ohne | für den Verbraucher annehmbar | — | Mean · Müllrose |
| pH | 7,33 | 6,5–9,5 | — | Mean · Müllrose |
| Taste | ohne | für den Verbraucher annehmbar | — | Mean · Müllrose |
| Temperature | 8,9 °C | — | — | Mean · Müllrose |
| Turbidity | 0,03 NTU | 1 NTU | — | Mean · Müllrose |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 15236
- How hard is the water in Postcode 15236?
- FWA Frankfurter Wasser- und Abwassergesellschaft mbH publishes the hardness range 18,63 for the supply zone Briesen. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
- How much nitrate is in the drinking water in Postcode 15236?
- FWA Frankfurter Wasser- und Abwassergesellschaft mbH publishes a nitrate value of 0,79 mg/l for the supply zone Briesen. The statutory parametric value is 50 mg/l; the measured value represents 2 % of the parametric value. Basis: Publication by the water supplier, retrieved on 13/07/2026.
- Are PFAS detectable in the drinking water in Postcode 15236?
- FWA Frankfurter Wasser- und Abwassergesellschaft mbH publishes for the supply zone Briesen a sum value PFAS-20 below the limit of quantification (entry in the report: "<0,000005 mg/l"). This is not to be read as "PFAS-free": below the limit of quantification, the measurement cannot make any statement. The statutory parametric value is 0.1 µg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Publication by the water supplier, retrieved on 13/07/2026.
- Who supplies the drinking water in Postcode 15236?
- FWA Frankfurter Wasser- und Abwassergesellschaft mbH. The values shown here come from the supply zone Briesen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.