Drinking water in 14806
One supply zone, water supplier: Stadtwerke Bad Belzig GmbH.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
WW Bad Belzig
Stadtwerke Bad Belzig GmbHAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
Water hardness
13.8 °dH
Hardness range medium
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 0,20 mg/l | 50 mg/l | 0.4 % | Single value |
| Escherichia coli (E. coli) | 0 n/100ml | 0/100 ml | — | Single value |
| Sulphate | 93,9 mg/l | 250 mg/l | 38 % | Single value |
| Sodium | 9,35 mg/l | 200 mg/l | 5 % | Single value |
Show all recorded parameters (56 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 n/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 n/100ml | 0/100 ml | — | Single value |
Chemical parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Copper | <0,01 mg/l below limit of quantification | 2 mg/l | < 0.5 % * | Single value |
| Nickel | 0,005 mg/l | 20 µg/l | 25 % | Single value |
| Nitrate | 0,20 mg/l | 50 mg/l | 0.4 % | Single value |
| Nitrite | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (20)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorodecanoic acid (PFDA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorododecane sulfonic acid (PFDoDS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorododecanoic acid (PFDoDA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorohexane sulfonic acid (PFHxS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorononanoic acid (PFNA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorooctanesulfonic acid (PFOS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorooctanoic acid (PFOA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanesulfonic acid (PFTrDS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanoic acid (PFTrDA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanesulfonic acid (PFUnDS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanoic acid (PFUnDA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
Indicator parameters (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,02 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Ammonium | <0,10 mg/l below limit of quantification | 0.5 mg/l | < 20 % * | Single value |
| Calcite dissolution capacity | 2,9 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 31,7 mg/l | 250 mg/l | 13 % | Single value |
| Coliform bacteria | 0 n/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 0 n/ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 0 n/ml | ohne anormale Veränderung | — | Single value |
| Colour | <0,2 1/m below limit of quantification | 0.5 m⁻¹ | — | Single value |
| Iron | <0,02 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| Oxidisability | <0,25 mg/lO2 below limit of quantification | 5 mg/l O2 | — | Single value |
| Sodium | 9,35 mg/l | 200 mg/l | 5 % | Single value |
| Sulphate | 93,9 mg/l | 250 mg/l | 38 % | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Temperature | 7,9 °C | — | — | Single value |
| Threshold odour number (TON) | 1 TON | — | — | Single value |
| Total organic carbon (TOC) | 0,9 mg/l | ohne anormale Veränderung | — | Single value |
| Turbidity | <0,1 NTU below limit of quantification | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 80,7 mg/l | — | — | Single value |
| Dissolved organic carbon (DOC) | 0,8 mg/l | — | — | Single value |
| Magnesium | 10,7 mg/l | — | — | Single value |
| Oxygen | 7,1 mg/l | — | — | Single value |
| Phosphate | <0,10 mg/l below limit of quantification | — | — | Single value |
| Potassium | 1,01 mg/l | — | — | Single value |
| Saturation index | -0,09 | — | — | Single value |
| Silicate / silicic acid | 6,00 mg/l | — | — | Single value |
| Sum of alkaline earth metals | 2,45 mmol/l | — | — | Single value |
| Total hardness | 2,46 mmol/l | — | — | Single value |
| Zinc | <0,02 mg/l below limit of quantification | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.stadtwerke-bad-belzig.de/wp-content/uploads/2026/05/03.02.2026-WW-Bad-Belzig-Werksausgang.pdf · 19.03.2026 · Probenahme 03.02.2026 · retrieved on 11/07/2026
Frequent questions about postcode 14806
- How hard is the water in Postcode 14806?
- Stadtwerke Bad Belzig GmbH publishes a total hardness of 2,46 mmol/l for the supply zone WW Bad Belzig — that corresponds to 13.8 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 19.03.2026, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Postcode 14806?
- Stadtwerke Bad Belzig GmbH publishes a nitrate value of 0,20 mg/l for the supply zone WW Bad Belzig. The statutory parametric value is 50 mg/l; the measured value represents 0.4 % of the parametric value. Basis: 19.03.2026, retrieved on 11/07/2026.
- Who supplies the drinking water in Postcode 14806?
- Stadtwerke Bad Belzig GmbH. The values shown here come from the supply zone WW Bad Belzig and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.