Skip to content
maunawai.info

Drinking water in 14778

For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 2 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
10.6 °dH
Hardness range mittel
Key values Wollin
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 0,95 mg/l 50 mg/l
2 %
Single value · Wollin
Sulphate 107,0 mg/l 250 mg/l
43 %
Single value · Wollin
Sodium 13,1 mg/l 200 mg/l
7 %
Single value · Wollin
Show all recorded parameters (18 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Wollin
Parameter Value Parametric value Share of the parametric value Reference
Copper < 0,001 mg/l
below limit of quantification
2 mg/l
< < 0.1 % *
Single value · Wollin
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Wollin
Nitrate 0,95 mg/l 50 mg/l
2 %
Single value · Wollin

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Wollin
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value · Wollin
Chloride 26,4 mg/l 250 mg/l
11 %
Single value · Wollin
Conductivity (25 °C) 457 µs/cm 2,790 µS/cm Single value · Wollin
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Wollin
Manganese < 0,001 mg/l
below limit of quantification
50 µg/l
< 2 % *
Single value · Wollin
pH 8,3 6,5–9,5 Single value · Wollin
Sodium 13,1 mg/l 200 mg/l
7 %
Single value · Wollin
Sulphate 107,0 mg/l 250 mg/l
43 %
Single value · Wollin
Total organic carbon (TOC) 1,3 mg C/l ohne anormale Veränderung Single value · Wollin

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (6)

Further parameters – Wollin
Parameter Value Parametric value Share of the parametric value Reference
Calcium 50,00 mg/l Single value · Wollin
Hardness range (WRMG) mittel Single value · Wollin
Magnesium 15,50 mg/l Single value · Wollin
Oxygen 7,70 mg/l Single value · Wollin
Potassium 2,65 mg/l Single value · Wollin
Total hardness 10,6 ° dH Single value · Wollin

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wazv-ziesar.de/seite/375780/analyse-wasserwerke.html · 2025 · retrieved on 25/07/2026
Show 2 more supply zones in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Wollin
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 0,95 mg/l 50 mg/l
2 %
Single value · Wollin
Sulphate 107,0 mg/l 250 mg/l
43 %
Single value · Wollin
Sodium 13,1 mg/l 200 mg/l
7 %
Single value · Wollin
Show all recorded parameters (16 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Wollin
Parameter Value Parametric value Share of the parametric value Reference
Copper < 0,001 mg/l
below limit of quantification
2 mg/l
< < 0.1 % *
Single value · Wollin
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value · Wollin
Nitrate 0,95 mg/l 50 mg/l
2 %
Single value · Wollin

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – Wollin
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value · Wollin
Chloride 26,4 mg/l 250 mg/l
11 %
Single value · Wollin
Conductivity (25 °C) 457 µs/cm 2,790 µS/cm Single value · Wollin
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Wollin
Manganese < 0,001 mg/l
below limit of quantification
50 µg/l
< 2 % *
Single value · Wollin
pH 8,3 6,5–9,5 Single value · Wollin
Sodium 13,1 mg/l 200 mg/l
7 %
Single value · Wollin
Sulphate 107,0 mg/l 250 mg/l
43 %
Single value · Wollin
Total organic carbon (TOC) 1,3 mg C/l ohne anormale Veränderung Single value · Wollin

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Wollin
Parameter Value Parametric value Share of the parametric value Reference
Calcium 50,00 mg/l Single value · Wollin
Magnesium 15,50 mg/l Single value · Wollin
Oxygen 7,70 mg/l Single value · Wollin
Potassium 2,65 mg/l Single value · Wollin

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: beetzsee-cd0c26ef.html · 2025 · retrieved on 13/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 14/02/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
12.3 °dH
Hardness range medium
Key values Wasserwerk Mahlenzien
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,2 mg/l 50 mg/l
2 %
Single value
Lead <0,0003 mg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value
Sulphate 77,2 mg/l 250 mg/l
31 %
Single value
Sodium 13,8 mg/l 200 mg/l
7 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (20 — most recent value per parameter)

Microbiology (1)

Microbiology – Wasserwerk Mahlenzien
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value

Chemical parameters (3)

Chemical parameters – Wasserwerk Mahlenzien
Parameter Value Parametric value Share of the parametric value Reference
Lead <0,0003 mg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Nitrate 1,2 mg/l 50 mg/l
2 %
Single value
Nitrite <0,03 mg/l
below limit of quantification
0.5 mg/l
< 6 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (13)

Indicator parameters – Wasserwerk Mahlenzien
Parameter Value Parametric value Share of the parametric value Reference
Ammonium <0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value
Chloride 25,6 mg/l 250 mg/l
10 %
Single value
Coliform bacteria 0 KBE/100 ml 0/100 ml Single value
Colony count 22 °C 0 1 ml ohne anormale Veränderung Single value
Colony count 36 °C 0 1 ml ohne anormale Veränderung Single value
Conductivity (25 °C) 528 µS/cm 2,790 µS/cm Single value
Iron 0,019 mg/l 0.2 mg/l
10 %
Single value
Manganese <0,007 mg/l
below limit of quantification
50 µg/l
< 14 % *
Single value
Sodium 13,8 mg/l 200 mg/l
7 %
Single value
Sulphate 77,2 mg/l 250 mg/l
31 %
Single value
Taste ohne ohne für den Verbraucher annehmbar Single value
Temperature 10,5 ° C Single value
Turbidity 0,25 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (3)

Further parameters – Wasserwerk Mahlenzien
Parameter Value Parametric value Share of the parametric value Reference
Calcium 81,2 mg/l Single value
Magnesium 5,6 mg/l Single value
Total hardness 12,3 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: beetzsee-4a7a390f.html · Probenahmedatum 27.01.2025, gemessen am 14.02.2025 · retrieved on 13/07/2026

Frequent questions about postcode 14778

How hard is the water in Postcode 14778?
Wasser- und Abwasserzweckverband Ziesar publishes a total hardness of 10.6 °dH for the supply zone Wollin (hardness range mittel). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 25/07/2026.
How much nitrate is in the drinking water in Postcode 14778?
Wasser- und Abwasserzweckverband Ziesar publishes a nitrate value of 0,95 mg/l for the supply zone Wollin. The statutory parametric value is 50 mg/l; the measured value represents 2 % of the parametric value. Basis: Publication by the water supplier, retrieved on 25/07/2026.
Who supplies the drinking water in Postcode 14778?
Wasser- und Abwasserzweckverband Ziesar. The values shown here come from the supply zone Wollin and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.