Skip to content
maunawai.info

Drinking water in 07607

For this postcode Zweckverband Trinkwasserversorgung und Abwasserbeseitigung Eisenberg (ZWE) publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 5 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
13.2 °dH
Hardness range 2

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Eisenberg (Bereich REK)
Parameter Value Parametric value Share of the parametric value Reference
pH 7,58 6,5–9,5 Single value · Eisenberg (Bereich REK)

Further parameters (2)

Further parameters – Eisenberg (Bereich REK)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 2 Single value · Eisenberg (Bereich REK)
Total hardness 13,20 °dH Single value · Eisenberg (Bereich REK)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://zwe-eisenberg.de/wasserhaerte/ · retrieved on 11/07/2026
Show 5 more supply zones in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
13.2 °dH
Hardness range 2

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Eisenberg (Klosterlausnitzer Str.)
Parameter Value Parametric value Share of the parametric value Reference
pH 7,58 6,5–9,5 Single value · Eisenberg (Klosterlausnitzer Str.)

Further parameters (2)

Further parameters – Eisenberg (Klosterlausnitzer Str.)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 2 Single value · Eisenberg (Klosterlausnitzer Str.)
Total hardness 13,20 °dH Single value · Eisenberg (Klosterlausnitzer Str.)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://zwe-eisenberg.de/wasserhaerte/ · retrieved on 11/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
16.2 °dH
Hardness range 3

No core values are available for this zone yet.

Show all recorded parameters (4 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Eisenberg (Königshofener Str.)
Parameter Value Parametric value Share of the parametric value Reference
pH 7,56 6,5–9,5 Single value · Eisenberg (Königshofener Str.)

Treatment substances (1)

Treatment substances – Eisenberg (Königshofener Str.)
Parameter Value Parametric value Share of the parametric value Reference
Chlorine dioxide x Single value · Eisenberg (Königshofener Str.)

Further parameters (2)

Further parameters – Eisenberg (Königshofener Str.)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 3 Single value · Eisenberg (Königshofener Str.)
Total hardness 16,20 °dH Single value · Eisenberg (Königshofener Str.)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://zwe-eisenberg.de/wasserhaerte/ · retrieved on 11/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
13.2 °dH
Hardness range 2

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Eisenberg (Promenadenweg)
Parameter Value Parametric value Share of the parametric value Reference
pH 7,58 6,5–9,5 Single value · Eisenberg (Promenadenweg)

Further parameters (2)

Further parameters – Eisenberg (Promenadenweg)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 2 Single value · Eisenberg (Promenadenweg)
Total hardness 13,20 °dH Single value · Eisenberg (Promenadenweg)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://zwe-eisenberg.de/wasserhaerte/ · retrieved on 11/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
16.2 °dH
Hardness range 3

No core values are available for this zone yet.

Show all recorded parameters (4 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Gösen
Parameter Value Parametric value Share of the parametric value Reference
pH 7,56 6,5–9,5 Single value · Gösen

Treatment substances (1)

Treatment substances – Gösen
Parameter Value Parametric value Share of the parametric value Reference
Chlorine dioxide x Single value · Gösen

Further parameters (2)

Further parameters – Gösen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 3 Single value · Gösen
Total hardness 16,20 °dH Single value · Gösen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://zwe-eisenberg.de/wasserhaerte/ · retrieved on 11/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
16.2 °dH
Hardness range 3

No core values are available for this zone yet.

Show all recorded parameters (4 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Hainspitz (Am Gerichtsfeld)
Parameter Value Parametric value Share of the parametric value Reference
pH 7,56 6,5–9,5 Single value · Hainspitz (Am Gerichtsfeld)

Treatment substances (1)

Treatment substances – Hainspitz (Am Gerichtsfeld)
Parameter Value Parametric value Share of the parametric value Reference
Chlorine dioxide x Single value · Hainspitz (Am Gerichtsfeld)

Further parameters (2)

Further parameters – Hainspitz (Am Gerichtsfeld)
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 3 Single value · Hainspitz (Am Gerichtsfeld)
Total hardness 16,20 °dH Single value · Hainspitz (Am Gerichtsfeld)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://zwe-eisenberg.de/wasserhaerte/ · retrieved on 11/07/2026

Frequent questions about postcode 07607

How hard is the water in Postcode 07607?
Zweckverband Trinkwasserversorgung und Abwasserbeseitigung Eisenberg (ZWE) publishes a total hardness of 13.2 °dH for the supply zone Eisenberg (Bereich REK) (hardness range 2). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 07607?
Zweckverband Trinkwasserversorgung und Abwasserbeseitigung Eisenberg (ZWE). The values shown here come from the supply zone Eisenberg (Bereich REK) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.