Drinking water in 02829
For this postcode Stadtwerke Görlitz AG publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 2 underneath.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
WW Reichenbach Reinwasser
Stadtwerke Görlitz AGAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 9,1 mg/l | 50 mg/l | 18 % | Mean |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Sulphate | 100 mg/l | 250 mg/l | 40 % | Mean |
| Sodium | 27,1 mg/l | 200 mg/l | 14 % | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (42 — most recent value per parameter)
Microbiology (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Intestinal enterococci | 1 in 100 ml | 0/100 ml | above the parametric value — this parameter must not be detectable | Maximum · Median 0 |
An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.
Chemical parameters (21)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,0002 mg/l below limit of quantification | 3 µg/l | < 7 % * | Mean |
| Antimony | <0,0005 mg/l below limit of quantification | 5 µg/l | < 10 % * | Mean |
| Arsenic | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Benzene | <0,0002 mg/l below limit of quantification | 1 µg/l | < 20 % * | Mean |
| Benzo(a)pyrene | <0,000005 mg/l below limit of quantification | 10 ng/l | < 50 % * | Mean |
| Bisphenol A | <0,0001 mg/l below limit of quantification | 2.5 µg/l | < 4 % * | Mean |
| Boron | 0,012 mg/l | 1 mg/l | 1 % | Mean |
| Bromate | <0,003 mg/l below limit of quantification | 10 µg/l | < 30 % * | Mean |
| Cadmium | <0,00005 mg/l below limit of quantification | 3 µg/l | < 2 % * | Mean |
| Chlorite | 0,075 mg/l | 0.2 mg/l | 37 % | Mean |
| Copper | <0,004 mg/l below limit of quantification | 2 mg/l | < 0.2 % * | Mean |
| Fluoride | 0,27 mg/l | 1.5 mg/l | 18 % | Mean |
| Haloacetic acids (HAA) | <0,001 mg/l below limit of quantification | — | — | Mean |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Mean |
| Nickel | 0,002 mg/l | 20 µg/l | 10 % | Mean |
| Nitrate | 9,1 mg/l | 50 mg/l | 18 % | Mean |
| Nitrite | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Mean |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
| Trihalomethanes — Total | <0,0002 mg/l below limit of quantification | 50 µg/l | < 0.4 % * | Mean |
| Uranium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (12)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | 0,016 mg/l | 0.2 mg/l | 8 % | Mean |
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Mean |
| Calcite dissolution capacity | 0,8 mg/l | 5 mg/l CaCO3 | — | Mean |
| Chloride | 30 mg/l | 250 mg/l | 12 % | Mean |
| Coliform bacteria | 0 in 100 ml | 0/100 ml | — | Maximum · Median 0 |
| Colony count 22 °C | 0 pro ml | ohne anormale Veränderung | — | Mean |
| Colony count 36 °C | 0 pro ml | ohne anormale Veränderung | — | Mean |
| Conductivity (25 °C) | 539 µS/cm | 2,790 µS/cm | — | Mean |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Mean |
| Sodium | 27,1 mg/l | 200 mg/l | 14 % | Mean |
| Sulphate | 100 mg/l | 250 mg/l | 40 % | Mean |
| Temperature | 10,6 °C | — | — | Mean |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Treatment substances (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chlorine dioxide | 0,08 mg/l | — | — | Mean |
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 66,7 mg/l | — | — | Mean |
| Magnesium | 8,1 mg/l | — | — | Mean |
| Oxygen | 9,4 mg/l | — | — | Mean |
| Phosphate | 0,066 mg/l | — | — | Mean |
| Potassium | 2,88 mg/l | — | — | Mean |
| Silicate / silicic acid | 9,765 mg/l | — | — | Mean |
| Total hardness | 2,00 mmol/l | — | — | Mean |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Show 2 more supply zones in this postcode
Görlitz
Stadtwerke Görlitz AGAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7,3 mg/l | 50 mg/l | 15 % | Single value · Görlitz |
| Sodium | 37,8 mg/l | 200 mg/l | 19 % | Single value · Görlitz |
Show all recorded parameters (6 — most recent value per parameter)
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 7,3 mg/l | 50 mg/l | 15 % | Single value · Görlitz |
Indicator parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,8 | 6,5–9,5 | — | Single value · Görlitz |
| Sodium | 37,8 mg/l | 200 mg/l | 19 % | Single value · Görlitz |
Further parameters (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 43,6 mg/l | — | — | Single value · Görlitz |
| Magnesium | 10,1 mg/l | — | — | Single value · Görlitz |
| Total hardness | 8,4 °dH | — | — | Single value · Görlitz |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Reichenbach
Stadtwerke Görlitz AGAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 9,1 mg/l | 50 mg/l | 18 % | Single value · Reichenbach |
| Sodium | 27,1 mg/l | 200 mg/l | 14 % | Single value · Reichenbach |
Show all recorded parameters (6 — most recent value per parameter)
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 9,1 mg/l | 50 mg/l | 18 % | Single value · Reichenbach |
Indicator parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,5 | 6,5–9,5 | — | Single value · Reichenbach |
| Sodium | 27,1 mg/l | 200 mg/l | 14 % | Single value · Reichenbach |
Further parameters (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 66,7 mg/l | — | — | Single value · Reichenbach |
| Magnesium | 8,1 mg/l | — | — | Single value · Reichenbach |
| Total hardness | 11,2 °dH | — | — | Single value · Reichenbach |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 02829
- How hard is the water in Postcode 02829?
- Stadtwerke Görlitz AG publishes a total hardness of 2,00 mmol/l for the supply zone WW Reichenbach Reinwasser — that corresponds to 11.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 12.02.2025, retrieved on 13/07/2026.
- How much nitrate is in the drinking water in Postcode 02829?
- Stadtwerke Görlitz AG publishes a nitrate value of 9,1 mg/l for the supply zone WW Reichenbach Reinwasser. The statutory parametric value is 50 mg/l; the measured value represents 18 % of the parametric value. Basis: 12.02.2025, retrieved on 13/07/2026.
- Who supplies the drinking water in Postcode 02829?
- Stadtwerke Görlitz AG. The values shown here come from the supply zone WW Reichenbach Reinwasser and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.