Skip to content
maunawai.info

Drinking water in 9816 (Austria)

For this postcode Reißeck publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 2 underneath.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

WVA Kolbnitz

Reißeck

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2021. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
2.6 °dH
Key values WVA Kolbnitz
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,6 ± 0,2 mg/l 50 mg/l Single value · WVA Kolbnitz
Show all recorded parameters (4 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – WVA Kolbnitz
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,6 ± 0,2 mg/l 50 mg/l Single value · WVA Kolbnitz
Nitrite unter der Nachweisgrenze
not detectable
Unit not stated in the document
0.1 mg/l Single value · WVA Kolbnitz
Pesticides keine
not detectable
Unit not stated in the document
0.1 µg/l Single value · WVA Kolbnitz

Further parameters (1)

Further parameters – WVA Kolbnitz
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 2,6 °dH Single value · WVA Kolbnitz

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 2 more supply zones in this postcode

WVA Napplach/Gappen (einschl. Kohlstatt)

Reißeck

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2021. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
2.6 °dH
Key values WVA Napplach/Gappen (einschl. Kohlstatt)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2,1 ± 0,3 mg/l 50 mg/l Single value · WVA Napplach/Gappen (einschl. Kohlstatt)
Show all recorded parameters (4 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – WVA Napplach/Gappen (einschl. Kohlstatt)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2,1 ± 0,3 mg/l 50 mg/l Single value · WVA Napplach/Gappen (einschl. Kohlstatt)
Nitrite unter der Nachweisgrenze
not detectable
Unit not stated in the document
0.1 mg/l Single value · WVA Napplach/Gappen (einschl. Kohlstatt)
Pesticides keine
not detectable
Unit not stated in the document
0.1 µg/l Single value · WVA Napplach/Gappen (einschl. Kohlstatt)

Further parameters (1)

Further parameters – WVA Napplach/Gappen (einschl. Kohlstatt)
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 2,6 °dH Single value · WVA Napplach/Gappen (einschl. Kohlstatt)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

WVA Penk

Reißeck

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2021. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
12.5 °dH
Key values WVA Penk
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,2 ± 0,2 mg/l 50 mg/l Single value · WVA Penk
Show all recorded parameters (4 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – WVA Penk
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,2 ± 0,2 mg/l 50 mg/l Single value · WVA Penk
Nitrite unter der Nachweisgrenze
not detectable
Unit not stated in the document
0.1 mg/l Single value · WVA Penk
Pesticides keine
not detectable
Unit not stated in the document
0.1 µg/l Single value · WVA Penk

Further parameters (1)

Further parameters – WVA Penk
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 12,5 °dH Single value · WVA Penk

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 9816

How hard is the water in Postcode 9816?
Reißeck publishes a total hardness of 2.6 °dH for the supply zone WVA Kolbnitz. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: Publication by the water supplier, retrieved on 11/08/2026.
Who supplies the drinking water in Postcode 9816?
Reißeck. The values shown here come from the supply zone WVA Kolbnitz and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.