Skip to content
maunawai.info

Drinking water in 9500 (Austria)

For this postcode Stadt Villach - Wasserwerk publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 2 underneath.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

9500, Brunnen Urlaken

Stadt Villach - Wasserwerk

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 13/05/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
16 °dH
Key values 9500, Brunnen Urlaken
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,5 mg/l 50 mg/l
15 %
Maximum · 9500, Brunnen Urlaken
Sulphate 29,7 mg/l 250 mg/l
12 %
Maximum · 9500, Brunnen Urlaken
Sodium 12,1 mg/l 200 mg/l
6 %
Maximum · 9500, Brunnen Urlaken
Show all recorded parameters (11 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – 9500, Brunnen Urlaken
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,5 mg/l 50 mg/l
15 %
Maximum · 9500, Brunnen Urlaken

Indicator parameters (5)

Indicator parameters – 9500, Brunnen Urlaken
Parameter Value Parametric value Share of the parametric value Reference
Chloride 23,7 mg/l 200 mg/l
12 %
Maximum · 9500, Brunnen Urlaken
Conductivity (25 °C) 580 µS/cm 2,500 µS/cm Maximum · 9500, Brunnen Urlaken
pH 7,4 6,5–9,5 Maximum · 9500, Brunnen Urlaken
Sodium 12,1 mg/l 200 mg/l
6 %
Maximum · 9500, Brunnen Urlaken
Sulphate 29,7 mg/l 250 mg/l
12 %
Maximum · 9500, Brunnen Urlaken

Further parameters (5)

Further parameters – 9500, Brunnen Urlaken
Parameter Value Parametric value Share of the parametric value Reference
Calcium 83 mg/l 400 mg/l
21 %
Maximum · 9500, Brunnen Urlaken
Carbonate hardness 14 °dH Maximum · 9500, Brunnen Urlaken
Magnesium 18,9 mg/l 150 mg/l
13 %
Maximum · 9500, Brunnen Urlaken
Potassium 4,1 mg/l 50 mg/l
8 %
Maximum · 9500, Brunnen Urlaken
Total hardness 16 °dH Maximum · 9500, Brunnen Urlaken

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 2 more supply zones in this postcode

9500, Union Quelle

Stadt Villach - Wasserwerk

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 13/05/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
10.4 °dH
Key values 9500, Union Quelle
Parameter Value Parametric value Share of the parametric value Reference
Sulphate 6,1 mg/l 250 mg/l
2 %
Maximum · 9500, Union Quelle
Sodium 2,2 mg/l 200 mg/l
1 %
Maximum · 9500, Union Quelle
Show all recorded parameters (9 — most recent value per parameter)

Indicator parameters (5)

Indicator parameters – 9500, Union Quelle
Parameter Value Parametric value Share of the parametric value Reference
Chloride 3,5 mg/l 200 mg/l
2 %
Maximum · 9500, Union Quelle
Conductivity (25 °C) 340 µS/cm 2,500 µS/cm Maximum · 9500, Union Quelle
pH 7,8 6,5–9,5 Maximum · 9500, Union Quelle
Sodium 2,2 mg/l 200 mg/l
1 %
Maximum · 9500, Union Quelle
Sulphate 6,1 mg/l 250 mg/l
2 %
Maximum · 9500, Union Quelle

Further parameters (4)

Further parameters – 9500, Union Quelle
Parameter Value Parametric value Share of the parametric value Reference
Calcium 55 mg/l 400 mg/l
14 %
Maximum · 9500, Union Quelle
Carbonate hardness 9,6 °dH Maximum · 9500, Union Quelle
Magnesium 11,5 mg/l 150 mg/l
8 %
Maximum · 9500, Union Quelle
Total hardness 10,4 °dH Maximum · 9500, Union Quelle

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

9500, Barbara Quelle

Stadt Villach - Wasserwerk

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 13/05/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
12.3 °dH
Key values 9500, Barbara Quelle
Parameter Value Parametric value Share of the parametric value Reference
Sulphate 8,7 mg/l 250 mg/l
3 %
Maximum · 9500, Barbara Quelle
Show all recorded parameters (7 — most recent value per parameter)

Indicator parameters (3)

Indicator parameters – 9500, Barbara Quelle
Parameter Value Parametric value Share of the parametric value Reference
Conductivity (25 °C) 410 µS/cm 2,500 µS/cm Maximum · 9500, Barbara Quelle
pH 7,8 6,5–9,5 Maximum · 9500, Barbara Quelle
Sulphate 8,7 mg/l 250 mg/l
3 %
Maximum · 9500, Barbara Quelle

Further parameters (4)

Further parameters – 9500, Barbara Quelle
Parameter Value Parametric value Share of the parametric value Reference
Calcium 56 mg/l 400 mg/l
14 %
Maximum · 9500, Barbara Quelle
Carbonate hardness 11,7 °dH Maximum · 9500, Barbara Quelle
Magnesium 19,2 mg/l 150 mg/l
13 %
Maximum · 9500, Barbara Quelle
Total hardness 12,3 °dH Maximum · 9500, Barbara Quelle

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 9500

How hard is the water in Postcode 9500?
Stadt Villach - Wasserwerk publishes a total hardness of 16 °dH for the supply zone 9500, Brunnen Urlaken. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 2025-05-13, retrieved on 08/08/2026.
How much nitrate is in the drinking water in Postcode 9500?
Stadt Villach - Wasserwerk publishes a nitrate value of 7,5 mg/l for the supply zone 9500, Brunnen Urlaken. The statutory parametric value is 50 mg/l; the measured value represents 15 % of the parametric value. Basis: 2025-05-13, retrieved on 08/08/2026.
Who supplies the drinking water in Postcode 9500?
Stadt Villach - Wasserwerk. The values shown here come from the supply zone 9500, Brunnen Urlaken and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.