Skip to content
maunawai.info

Drinking water in 9182 (Austria)

For this postcode Marktgemeinde St. Jakob i. Ros. publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

9182, 9184STJG Hochbehälter St. Oswald

Marktgemeinde St. Jakob i. Ros.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 29/04/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
12.8 °dH
Key values 9182, 9184STJG Hochbehälter St. Oswald
Parameter Value Parametric value Share of the parametric value Reference
Sulphate 32 mg/l 250 mg/l
13 %
Single value · 9182, 9184STJG Hochbehälter St. Oswald
Show all recorded parameters (8 — most recent value per parameter)

Indicator parameters (3)

Indicator parameters – 9182, 9184STJG Hochbehälter St. Oswald
Parameter Value Parametric value Share of the parametric value Reference
Conductivity (25 °C) 430 µS/cm 2,500 µS/cm Single value · 9182, 9184STJG Hochbehälter St. Oswald
pH 7,8 6,5–9,5 Single value · 9182, 9184STJG Hochbehälter St. Oswald
Sulphate 32 mg/l 250 mg/l
13 %
Single value · 9182, 9184STJG Hochbehälter St. Oswald

Further parameters (5)

Further parameters – 9182, 9184STJG Hochbehälter St. Oswald
Parameter Value Parametric value Share of the parametric value Reference
Calcium 50 mg/l 400 mg/l
13 %
Single value · 9182, 9184STJG Hochbehälter St. Oswald
Carbonate hardness 10,7 °dH Single value · 9182, 9184STJG Hochbehälter St. Oswald
Magnesium 25 mg/l 150 mg/l
17 %
Single value · 9182, 9184STJG Hochbehälter St. Oswald
Potassium 1,3 mg/l 50 mg/l
3 %
Single value · 9182, 9184STJG Hochbehälter St. Oswald
Total hardness 12,8 °dH Single value · 9182, 9184STJG Hochbehälter St. Oswald

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 1 more supply zone in this postcode

9182, 9184STJG Quellsammelschacht nach UV

Marktgemeinde St. Jakob i. Ros.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 29/04/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
10.8 °dH
Key values 9182, 9184STJG Quellsammelschacht nach UV
Parameter Value Parametric value Share of the parametric value Reference
Sulphate 4,3 mg/l 250 mg/l
2 %
Single value · 9182, 9184STJG Quellsammelschacht nach UV
Show all recorded parameters (7 — most recent value per parameter)

Indicator parameters (3)

Indicator parameters – 9182, 9184STJG Quellsammelschacht nach UV
Parameter Value Parametric value Share of the parametric value Reference
Conductivity (25 °C) 360 µS/cm 2,500 µS/cm Single value · 9182, 9184STJG Quellsammelschacht nach UV
pH 7,8 6,5–9,5 Single value · 9182, 9184STJG Quellsammelschacht nach UV
Sulphate 4,3 mg/l 250 mg/l
2 %
Single value · 9182, 9184STJG Quellsammelschacht nach UV

Further parameters (4)

Further parameters – 9182, 9184STJG Quellsammelschacht nach UV
Parameter Value Parametric value Share of the parametric value Reference
Calcium 53 mg/l 400 mg/l
13 %
Single value · 9182, 9184STJG Quellsammelschacht nach UV
Carbonate hardness 10,5 °dH Single value · 9182, 9184STJG Quellsammelschacht nach UV
Magnesium 15 mg/l 150 mg/l
10 %
Single value · 9182, 9184STJG Quellsammelschacht nach UV
Total hardness 10,8 °dH Single value · 9182, 9184STJG Quellsammelschacht nach UV

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 9182

How hard is the water in Postcode 9182?
Marktgemeinde St. Jakob i. Ros. publishes a total hardness of 12.8 °dH for the supply zone 9182, 9184STJG Hochbehälter St. Oswald. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 2025-04-29, retrieved on 08/08/2026.
Who supplies the drinking water in Postcode 9182?
Marktgemeinde St. Jakob i. Ros.. The values shown here come from the supply zone 9182, 9184STJG Hochbehälter St. Oswald and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.