Skip to content
maunawai.info

Drinking water in 6822 (Austria)

For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 2 underneath.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

PW Satteinser Au

Gemeindeamt Satteins

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
18.5 °dH
Key values PW Satteinser Au
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.0 mg/l 50 mg/l
8 %
Single value
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Sulphate 148 mg/l 250 mg/l
59 %
Single value
Sodium 5.9 mg/l 200 mg/l
3 %
Single value
Show all recorded parameters (18 — most recent value per parameter)

Microbiology (2)

Microbiology – PW Satteinser Au
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Chemical parameters (2)

Chemical parameters – PW Satteinser Au
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.0 mg/l 50 mg/l
8 %
Single value
Nitrite < 0.010 mg/l
below limit of quantification
0.1 mg/l
< 10 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (9)

Indicator parameters – PW Satteinser Au
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0.010 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Chloride 7.3 mg/l 200 mg/l
4 %
Single value
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 0 KBE/ml 100 1/ml Single value
Colony count 36 °C 0 KBE/ml 20 1/ml Single value
Iron < 2.0 µg/l
below limit of quantification
0.2 mg/l
< 1 % *
Single value
Manganese < 2.0 µg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
Sodium 5.9 mg/l 200 mg/l
3 %
Single value
Sulphate 148 mg/l 250 mg/l
59 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – PW Satteinser Au
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3.67 mmol/l Single value
Calcium 88 mg/l 400 mg/l
22 %
Single value
Magnesium 27 mg/l 150 mg/l
18 %
Single value
Potassium 1.9 mg/l 50 mg/l
4 %
Single value
Total hardness 18.5 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.satteins.net/system/web/getDocument.ashx?cts=1774972661&fileid=1325835 · 23.01.2026 · Probenahme 10.11.2025 09:30 Uhr; Analysendatum 10.11.2025 bis 22.01.2026 · retrieved on 14/08/2026
Show 2 more supply zones in this postcode

HB Kamizan nach UV Anlage

Gemeindeamt Satteins

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
14 °dH
Key values HB Kamizan nach UV Anlage
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3.6 mg/l 50 mg/l
7 %
Single value · HB Kamizan nach UV Anlage
Escherichia coli (E. coli) 0 KBE/250ml 0/100 ml Single value · HB Kamizan nach UV Anlage
Sulphate 31 mg/l 250 mg/l
12 %
Single value · HB Kamizan nach UV Anlage
Sodium 3.9 mg/l 200 mg/l
2 %
Single value · HB Kamizan nach UV Anlage
Show all recorded parameters (20 — most recent value per parameter)

Microbiology (3)

Microbiology – HB Kamizan nach UV Anlage
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/250ml 0/100 ml Single value · HB Kamizan nach UV Anlage
Intestinal enterococci 0 KBE/250ml 0/100 ml Single value · HB Kamizan nach UV Anlage
Pseudomonas aeruginosa 0 KBE/250ml 0/100 ml Single value · HB Kamizan nach UV Anlage

Chemical parameters (2)

Chemical parameters – HB Kamizan nach UV Anlage
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3.6 mg/l 50 mg/l
7 %
Single value · HB Kamizan nach UV Anlage
Nitrite <0.010 mg/l
below limit of quantification
0.1 mg/l
< 10 % *
Single value · HB Kamizan nach UV Anlage

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (10)

Indicator parameters – HB Kamizan nach UV Anlage
Parameter Value Parametric value Share of the parametric value Reference
Ammonium <0.010 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · HB Kamizan nach UV Anlage
Chloride 4.2 mg/l 200 mg/l
2 %
Single value · HB Kamizan nach UV Anlage
Clostridium perfringens (including spores) 0 KBE/250ml 0/100 ml Single value · HB Kamizan nach UV Anlage
Coliform bacteria 0 KBE/250ml 0/100 ml Single value · HB Kamizan nach UV Anlage
Colony count 22 °C 0 KBE/ml 100 1/ml Single value · HB Kamizan nach UV Anlage
Colony count 36 °C 0 KBE/ml 20 1/ml Single value · HB Kamizan nach UV Anlage
Iron <2.0 µg/l
below limit of quantification
0.2 mg/l
< 1 % *
Single value · HB Kamizan nach UV Anlage
Manganese <2.0 µg/l
below limit of quantification
50 µg/l
< 4 % *
Single value · HB Kamizan nach UV Anlage
Sodium 3.9 mg/l 200 mg/l
2 %
Single value · HB Kamizan nach UV Anlage
Sulphate 31 mg/l 250 mg/l
12 %
Single value · HB Kamizan nach UV Anlage

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – HB Kamizan nach UV Anlage
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 4.32 mmol/l Single value · HB Kamizan nach UV Anlage
Calcium 61 mg/l 400 mg/l
15 %
Single value · HB Kamizan nach UV Anlage
Magnesium 24 mg/l 150 mg/l
16 %
Single value · HB Kamizan nach UV Anlage
Potassium 1.5 mg/l 50 mg/l
3 %
Single value · HB Kamizan nach UV Anlage
Total hardness 14.0 °dH Single value · HB Kamizan nach UV Anlage

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.satteins.net/system/web/getDocument.ashx?cts=1774972657&fileid=1325834 · 23.01.2026 · Probenahme 10.11.2025, Analysendatum 10.11.2025 bis 22.01.2026 · retrieved on 14/08/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 06/05/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values Allmeinquelle, HB Netzabgabe
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Allmeinquelle, HB Netzabgabe
Show all recorded parameters (5 — most recent value per parameter)

Microbiology (2)

Microbiology – Allmeinquelle, HB Netzabgabe
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Allmeinquelle, HB Netzabgabe
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value · Allmeinquelle, HB Netzabgabe

Indicator parameters (3)

Indicator parameters – Allmeinquelle, HB Netzabgabe
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value · Allmeinquelle, HB Netzabgabe
Colony count 22 °C 4 KBE/ml 100 1/ml Single value · Allmeinquelle, HB Netzabgabe
Colony count 36 °C 0 KBE/ml 20 1/ml Single value · Allmeinquelle, HB Netzabgabe

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.schnifis.at/system/web/getDocument.ashx?cts=1741685927&fileid=1253465 · Bregenz, am 18.06.2024 · Probenahme am 06.05.2024 · retrieved on 14/08/2026

Frequent questions about postcode 6822

How hard is the water in Postcode 6822?
Gemeindeamt Satteins publishes a total hardness of 18.5 °dH for the supply zone PW Satteinser Au. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 23.01.2026, retrieved on 14/08/2026.
How much nitrate is in the drinking water in Postcode 6822?
Gemeindeamt Satteins publishes a nitrate value of 4.0 mg/l for the supply zone PW Satteinser Au. The statutory parametric value is 50 mg/l; the measured value represents 8 % of the parametric value. Basis: 23.01.2026, retrieved on 14/08/2026.
Who supplies the drinking water in Postcode 6822?
Gemeindeamt Satteins. The values shown here come from the supply zone PW Satteinser Au and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.