Drinking water in 6344 (Austria)
For this postcode Gemeinde Walchsee publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.
The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
VZ Walchsee Ort, Gemeindebauhof, Schwaigs 7, Hahn WB Garage
Gemeinde WalchseeAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 13/06/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 2,6 mg/L | 50 mg/l | 5 % | Single value |
| Lead | < 1 µg/L below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 KBE / 100ml | 0/100 ml | — | Single value |
| Sulphate | 329,3 mg/L | 250 mg/l | 132 % above the parametric value | Single value |
| Note from the water supplier in the document: Überschreitungen bis 750 mg/l tolerierbar solange der dem Calcium nicht äquivalente Sulfatgehalt nicht über 250 mg/l liegt | ||||
| Sodium | 0,6 mg/L | 200 mg/l | 0.3 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.
Show all recorded parameters (161 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE / 100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE / 100ml | 0/100 ml | — | Single value |
| Pseudomonas aeruginosa | 0 KBE / 100ml | 0/100 ml | — | Single value |
Chemical parameters (99)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,1,1-Trichloroethane | ‡ mg/L not determined | — | — | Single value |
| 1,2-dichloroethane | ‡ mg/L not determined | 3 µg/l | — | Single value |
| Acrylamide | ‡ mg/L not determined | 0.1 µg/l | — | Single value |
| Alachlor | ‡ µg/L not determined | — | — | Single value |
| Aldrin | ‡ µg/L not determined | — | — | Single value |
| Antimony | ‡ µg/L not determined | 5 µg/l | — | Single value |
| Arsenic | ‡ µg/L not determined | 10 µg/l | — | Single value |
| Atrazine | ‡ µg/L not determined | — | — | Single value |
| Azoxystrobin | ‡ µg/L not determined | — | — | Single value |
| Bentazone | ‡ µg/L not determined | — | — | Single value |
| Benzene | ‡ mg/L not determined | 1 µg/l | — | Single value |
| Benzo(a)pyrene | ‡ mg/L not determined | 10 ng/l | — | Single value |
| Benzo(b)fluoranthene | ‡ mg/L not determined | — | — | Single value |
| Benzo(ghi)perylene | ‡ mg/L not determined | — | — | Single value |
| Benzo(k)fluoranthene | ‡ mg/L not determined | — | — | Single value |
| Bisphenol A | ‡ µg/L not determined | 2.5 µg/l | — | Single value |
| Boron | ‡ µg/L not determined | 1 mg/l | — | Single value |
| Bromacil | ‡ µg/L not determined | — | — | Single value |
| Bromate | ‡ mg/L not determined | 10 µg/l | — | Single value |
| Bromodichloromethane | ‡ mg/L not determined | — | — | Single value |
| Cadmium | [0,05] µg/L not detectable | 5 µg/l | — | Single value |
| Chlorate | ‡ mg/L not determined | 0.25 mg/l | — | Single value |
| Chloridazon | ‡ µg/L not determined | — | — | Single value |
| Chlorite | ‡ mg/L not determined | 0.25 mg/l | — | Single value |
| Chlorothalonil | ‡ µg/L not determined | — | — | Single value |
| Chromium | ‡ µg/L not determined | 50 µg/l | — | Single value |
| cis-1,2-Dichloroethene | ‡ mg/L not determined | — | — | Single value |
| Clopyralid | ‡ µg/L not determined | — | — | Single value |
| Clothianidin | ‡ µg/L not determined | — | — | Single value |
| Copper | < 5 µg/L below limit of quantification | 2 mg/l | < 0.2 % * | Single value |
| Cyanide | ‡ mg/L not determined | 50 µg/l | — | Single value |
| Desethylatrazine | ‡ µg/L not determined | — | — | Single value |
| Desethylterbuthylazine | ‡ µg/L not determined | — | — | Single value |
| Desisopropylatrazine | ‡ µg/L not determined | — | — | Single value |
| Dibromoacetic acid | ‡ mg/L not determined | — | — | Single value |
| Dibromochloromethane | ‡ mg/L not determined | — | — | Single value |
| Dicamba | ‡ µg/L not determined | — | — | Single value |
| Dichloroacetic acid | ‡ mg/L not determined | — | — | Single value |
| Dichloromethane | ‡ mg/L not determined | — | — | Single value |
| Dichlorprop | ‡ µg/L not determined | — | — | Single value |
| Dieldrin | ‡ µg/L not determined | — | — | Single value |
| Dimethachlor | ‡ µg/L not determined | — | — | Single value |
| Dimethenamid | ‡ µg/L not determined | — | — | Single value |
| Diuron | ‡ µg/L not determined | — | — | Single value |
| Epichlorohydrin | ‡ µg/L not determined | 0.1 µg/l | — | Single value |
| Ethofumesate | ‡ µg/L not determined | — | — | Single value |
| Flufenacet | ‡ µg/L not determined | — | — | Single value |
| Fluoranthene | ‡ mg/L not determined | — | — | Single value |
| Fluoride | < 0.5 mg/L below limit of quantification | 1.5 mg/l | < 33 % * | Single value |
| Glyphosate | ‡ µg/L not determined | — | — | Single value |
| Haloacetic acids (HAA) | ‡ mg/L not determined | 60 µg/l | — | Single value |
| Heptachlor | ‡ µg/L not determined | — | — | Single value |
| Hexazinone | ‡ µg/L not determined | — | — | Single value |
| Imidacloprid | ‡ µg/L not determined | — | — | Single value |
| Indeno(1,2,3-cd)pyrene | ‡ mg/L not determined | — | — | Single value |
| Iodosulfuron-methyl | ‡ µg/L not determined | — | — | Single value |
| Isoproturon | ‡ µg/L not determined | — | — | Single value |
| Lead | < 1 µg/L below limit of quantification | 10 µg/l | < 10 % * | Single value |
| MCPA | ‡ µg/L not determined | — | — | Single value |
| Mercury | ‡ µg/L not determined | 1 µg/l | — | Single value |
| Mesosulfuron-methyl | ‡ µg/L not determined | — | — | Single value |
| Metalaxyl | ‡ µg/L not determined | — | — | Single value |
| Metamitron | ‡ µg/L not determined | — | — | Single value |
| Metazachlor | ‡ µg/L not determined | — | — | Single value |
| Metazachlor acid | ‡ µg/L not determined | — | — | Single value |
| Metazachlor sulfonic acid | ‡ µg/L not determined | — | — | Single value |
| Metolachlor | ‡ µg/L not determined | — | — | Single value |
| Metribuzin | ‡ µg/L not determined | — | — | Single value |
| Metsulfuron-methyl | ‡ µg/L not determined | — | — | Single value |
| Monobromoacetic acid | ‡ mg/L not determined | — | — | Single value |
| Monochloroacetic acid | ‡ mg/L not determined | — | — | Single value |
| Nickel | < 1 µg/L below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nicosulfuron | ‡ µg/L not determined | — | — | Single value |
| Nitrate | 2,6 mg/L | 50 mg/l | 5 % | Single value |
| Nitrite | < 0,01 mg/L below limit of quantification | 0.1 mg/l | < 10 % * | Single value |
| Pesticides — Total | ‡ µg/L not determined | 0.5 µg/l | — | Single value |
| Pethoxamid | ‡ µg/L not determined | — | — | Single value |
| Propazine | ‡ µg/L not determined | — | — | Single value |
| Propiconazole | ‡ µg/L not determined | — | — | Single value |
| Selenium | ‡ µg/L not determined | 20 µg/l | — | Single value |
| Simazine | ‡ µg/L not determined | — | — | Single value |
| Terbuthylazine | ‡ µg/L not determined | — | — | Single value |
| Tetrachloroethene | ‡ mg/L not determined | — | — | Single value |
| Tetrachloromethane | ‡ mg/L not determined | — | — | Single value |
| Thiacloprid | ‡ µg/L not determined | — | — | Single value |
| Thiamethoxam | ‡ µg/L not determined | — | — | Single value |
| Thifensulfuron-methyl | ‡ µg/L not determined | — | — | Single value |
| Tolylfluanid | ‡ µg/L not determined | — | — | Single value |
| trans-1,2-Dichloroethene | ‡ mg/L not determined | — | — | Single value |
| Tribenuron-methyl | ‡ µg/L not determined | — | — | Single value |
| Tribromomethane (bromoform) | ‡ mg/L not determined | — | — | Single value |
| Trichloroacetic acid | ‡ mg/L not determined | — | — | Single value |
| Trichloroethene | ‡ mg/L not determined | — | — | Single value |
| Trichloromethane (chloroform) | ‡ mg/L not determined | — | — | Single value |
| Triclopyr | ‡ µg/L not determined | — | — | Single value |
| Triflusulfuron-methyl | ‡ µg/L not determined | — | — | Single value |
| Tritosulfuron | ‡ µg/L not determined | — | — | Single value |
| Uranium | ‡ µg/L not determined | 15 µg/l | — | Single value |
| Vinyl chloride | ‡ mg/L not determined | 0.5 µg/l | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (20)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | ‡ µg/L not determined | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | ‡ µg/L not determined | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | ‡ µg/L not determined | — | — | Single value |
| Perfluorodecanoic acid (PFDA) | ‡ µg/L not determined | — | — | Single value |
| Perfluorododecane sulfonic acid (PFDoDS) | ‡ µg/L not determined | — | — | Single value |
| Perfluorododecanoic acid (PFDoDA) | ‡ µg/L not determined | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | ‡ µg/L not determined | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | ‡ µg/L not determined | — | — | Single value |
| Perfluorohexane sulfonic acid (PFHxS) | ‡ µg/L not determined | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | ‡ µg/L not determined | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | ‡ µg/L not determined | — | — | Single value |
| Perfluorononanoic acid (PFNA) | ‡ µg/L not determined | — | — | Single value |
| Perfluorooctanesulfonic acid (PFOS) | ‡ µg/L not determined | — | — | Single value |
| Perfluorooctanoic acid (PFOA) | ‡ µg/L not determined | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | ‡ µg/L not determined | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | ‡ µg/L not determined | — | — | Single value |
| Perfluorotridecanesulfonic acid (PFTrDS) | ‡ µg/L not determined | — | — | Single value |
| Perfluorotridecanoic acid (PFTrDA) | ‡ µg/L not determined | — | — | Single value |
| Perfluoroundecanesulfonic acid (PFUnDS) | ‡ µg/L not determined | — | — | Single value |
| Perfluoroundecanoic acid (PFUnDA) | ‡ µg/L not determined | — | — | Single value |
Metabolites (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 2-Hydroxyatrazine | ‡ µg/L not determined | — | — | Single value |
| Dimethylsulfamide (DMS) | ‡ µg/L not determined | — | — | Single value |
| Flufenacet sulfonic acid M2 | ‡ µg/L not determined | — | — | Single value |
| Methyl-desphenyl-chloridazon | ‡ µg/L not determined | — | — | Single value |
Indicator parameters (15)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | ‡ µg/L not determined | 0.2 mg/l | — | Single value |
| Ammonium | < 0,01 mg/L below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Chloride | 0,7 mg/L | 200 mg/l | 0.4 % | Single value |
| Clostridium perfringens (including spores) | n.a. KBE / 100ml not detectable | 0/100 ml | — | Single value |
| Coliform bacteria | 0 KBE / 100ml | 0/100 ml | — | Single value |
| Colour | farblos subjektiv | — | — | Single value |
| Conductivity (25 °C) | 717 in µS/cm | 2,500 µS/cm | — | Single value |
| Iron | [1,22] µg/L not detectable | 0.2 mg/l | — | Single value |
| Manganese | [0,49] µg/L not detectable | 50 µg/l | — | Single value |
| Odour | geruchlos subjektiv | — | — | Single value |
| pH | 7,7 | 6,5–9,5 | — | Single value |
| Sodium | 0,6 mg/L | 200 mg/l | 0.3 % | Single value |
| Sulphate | 329,3 mg/L | 250 mg/l | 132 % above the parametric value | Single value |
| Note from the water supplier in the document: Überschreitungen bis 750 mg/l tolerierbar solange der dem Calcium nicht äquivalente Sulfatgehalt nicht über 250 mg/l liegt | ||||
| Taste | o.b. subjektiv | — | — | Single value |
| Turbidity | keine subjektiv | — | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.
Further parameters (20)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,1-Dichloroethene | ‡ mg/L not determined | — | — | Single value |
| Anthracene | ‡ mg/L not determined | — | — | Single value |
| Benzo(a)anthracene | ‡ mg/L not determined | — | — | Single value |
| Calcium | 129,9 mg/L | 400 mg/l | 32 % | Single value |
| Carbonate hardness | 5,9 ° dH | — | — | Single value |
| Chrysene | ‡ mg/L not determined | — | — | Single value |
| Ethylbenzene | ‡ mg/L not determined | — | — | Single value |
| Fluorene | ‡ mg/L not determined | — | — | Single value |
| Hydrogen carbonate | 127,5 mg/L | — | — | Single value |
| Magnesium | 29,4 mg/L | 150 mg/l | 20 % | Single value |
| Naphthalene | ‡ mg/L not determined | — | — | Single value |
| Non-carbonate hardness | 19,1 ° dH | — | — | Single value |
| Phenanthrene | ‡ mg/L not determined | — | — | Single value |
| Phosphate | < 0,01 mg/L below limit of quantification | — | — | Single value |
| Potassium | 0,4 mg/L | 50 mg/l | 0.8 % | Single value |
| Pyrene | ‡ mg/L not determined | — | — | Single value |
| Toluene | ‡ mg/L not determined | — | — | Single value |
| Total hardness | 25 ° dH | — | — | Single value |
| Xylenes | ‡ mg/L not determined | — | — | Single value |
| Zinc | < 10 µg/L below limit of quantification | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Show 1 more supply zone in this postcode
VZ Seestraße-Amberg-Seeblick-Sonnleiten, Laufbrunnen bei Haus Seeblick 44
Gemeinde WalchseeAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 13/06/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE in 100 ml | 0/100 ml | — | Single value |
Show all recorded parameters (11 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE in 100 ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE in 100 ml | 0/100 ml | — | Single value |
| Pseudomonas aeruginosa | 0 KBE in 100 ml | 0/100 ml | — | Single value |
Indicator parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 KBE in 100 ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 1 KBE in 1 ml | 100 1/ml | — | Single value |
| Colour | farblos | — | — | Single value |
| Conductivity (25 °C) | 284 in µS/cm | 2,500 µS/cm | — | Single value |
| Odour | geruchlos | — | — | Single value |
| Taste | n.a. not detectable | — | — | Single value |
| Temperature | 9,7 in °C | — | — | Single value |
| Turbidity | keine | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 6344
- How hard is the water in Postcode 6344?
- Gemeinde Walchsee publishes a total hardness of 25 °dH for the supply zone VZ Walchsee Ort, Gemeindebauhof, Schwaigs 7, Hahn WB Garage. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: Publication by the water supplier, retrieved on 14/08/2026.
- How much nitrate is in the drinking water in Postcode 6344?
- Gemeinde Walchsee publishes a nitrate value of 2,6 mg/L for the supply zone VZ Walchsee Ort, Gemeindebauhof, Schwaigs 7, Hahn WB Garage. The statutory parametric value is 50 mg/l; the measured value represents 5 % of the parametric value. Basis: Publication by the water supplier, retrieved on 14/08/2026.
- Who supplies the drinking water in Postcode 6344?
- Gemeinde Walchsee. The values shown here come from the supply zone VZ Walchsee Ort, Gemeindebauhof, Schwaigs 7, Hahn WB Garage and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.