Drinking water in 5743 (Austria)
One supply zone, water supplier: Gemeinde Krimml.
The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
5743, TWA Hochquellenleitung
Gemeinde KrimmlAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 19/05/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 2 mg/l | 50 mg/l | 4 % | Single value · 5743, TWA Hochquellenleitung |
| Sulphate | 8,7 mg/l | 250 mg/l | 3 % | Single value · 5743, TWA Hochquellenleitung |
| Sodium | 0,9 mg/l | 200 mg/l | 0.5 % | Single value · 5743, TWA Hochquellenleitung |
Show all recorded parameters (11 — most recent value per parameter)
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 2 mg/l | 50 mg/l | 4 % | Single value · 5743, TWA Hochquellenleitung |
Indicator parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 0,3 mg/l | 200 mg/l | 0.2 % | Single value · 5743, TWA Hochquellenleitung |
| Conductivity (25 °C) | 173 µS/cm | 2,500 µS/cm | — | Single value · 5743, TWA Hochquellenleitung |
| pH | 8,2 | 6,5–9,5 | — | Single value · 5743, TWA Hochquellenleitung |
| Sodium | 0,9 mg/l | 200 mg/l | 0.5 % | Single value · 5743, TWA Hochquellenleitung |
| Sulphate | 8,7 mg/l | 250 mg/l | 3 % | Single value · 5743, TWA Hochquellenleitung |
Further parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 28,1 mg/l | 400 mg/l | 7 % | Single value · 5743, TWA Hochquellenleitung |
| Carbonate hardness | 4,2 °dH | — | — | Single value · 5743, TWA Hochquellenleitung |
| Magnesium | 2,4 mg/l | 150 mg/l | 2 % | Single value · 5743, TWA Hochquellenleitung |
| Potassium | 0,7 mg/l | 50 mg/l | 1 % | Single value · 5743, TWA Hochquellenleitung |
| Total hardness | 4,5 °dH | — | — | Single value · 5743, TWA Hochquellenleitung |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 5743
- How hard is the water in Postcode 5743?
- Gemeinde Krimml publishes a total hardness of 4.5 °dH for the supply zone 5743, TWA Hochquellenleitung. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 2022-05-19, retrieved on 08/08/2026.
- How much nitrate is in the drinking water in Postcode 5743?
- Gemeinde Krimml publishes a nitrate value of 2 mg/l for the supply zone 5743, TWA Hochquellenleitung. The statutory parametric value is 50 mg/l; the measured value represents 4 % of the parametric value. Basis: 2022-05-19, retrieved on 08/08/2026.
- Who supplies the drinking water in Postcode 5743?
- Gemeinde Krimml. The values shown here come from the supply zone 5743, TWA Hochquellenleitung and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.