Skip to content
maunawai.info

Drinking water in 5450 (Austria)

For this postcode WVA Gemeinde Werfen publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 2 underneath.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Versorgungsgebiet Tenneck (WVA Gemeinde Werfen, Probenahmestelle AI Werkstatt)

WVA Gemeinde Werfen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 04/04/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
24.2 °dH
Key values Versorgungsgebiet Tenneck (WVA Gemeinde Werfen, Probenahmestelle AI Werkstatt)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5,2 mg/l 50 mg/l
10 %
Single value
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Sulphate 154 mg/l 250 mg/l
62 %
Single value
Sodium 1,68 mg/l 200 mg/l
0.8 %
Single value
Show all recorded parameters (28 — most recent value per parameter)

Microbiology (2)

Microbiology – Versorgungsgebiet Tenneck (WVA Gemeinde Werfen, Probenahmestelle AI Werkstatt)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Chemical parameters (3)

Chemical parameters – Versorgungsgebiet Tenneck (WVA Gemeinde Werfen, Probenahmestelle AI Werkstatt)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5,2 mg/l 50 mg/l
10 %
Single value
Nitrate/50 + Nitrite/3 0,108 mg/l Single value
Nitrite <0,01 mg/l
below limit of quantification
0.1 mg/l
< 10 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – Versorgungsgebiet Tenneck (WVA Gemeinde Werfen, Probenahmestelle AI Werkstatt)
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,048 mg/l 0.5 mg/l
10 %
Single value
Chloride 1,7 mg/l 200 mg/l
0.8 %
Single value
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 4 KBE/ml 100 1/ml Single value
Colony count 36 °C 1 KBE/ml 20 1/ml Single value
Colour farblos, klar, ohne Bodensatz Single value
Conductivity (25 °C) 668 µS/cm 2,500 µS/cm Single value
Iron <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Odour geruchlos Single value
Oxidisability <0,10 (NWG) mg O2/l
below limit of quantification
5 mg/l Single value
pH 7,8 6,5–9,5 Single value
Sodium 1,68 mg/l 200 mg/l
0.8 %
Single value
Sulphate 154 mg/l 250 mg/l
62 %
Single value
Taste geschmacklos Single value
Temperature 10,1 °C Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (7)

Further parameters – Versorgungsgebiet Tenneck (WVA Gemeinde Werfen, Probenahmestelle AI Werkstatt)
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 5,40 mmol/l Single value
Calcium 112 mg/l 400 mg/l
28 %
Single value
Carbonate hardness 15,0 °dH Single value
Hydrogen carbonate 326 mg/l Single value
Magnesium 36,9 mg/l 150 mg/l
25 %
Single value
Potassium 1,77 mg/l 50 mg/l
4 %
Single value
Total hardness 4,31 mmol/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gemeindewerfen.at/system/web/GetDocument.ashx?cts=1715001142&fileId=1381842 · 23.04.2024 · Probenahme 04.04.2024 · retrieved on 14/08/2026
Show 2 more supply zones in this postcode

WVA Gemeinde Werfen - Versorgungsgebiet Imlau Ortsnetz

WVA Gemeinde Werfen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 04/04/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
6.6 °dH
Key values WVA Gemeinde Werfen - Versorgungsgebiet Imlau Ortsnetz
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2,0 mg/l 50 mg/l
4 %
Single value
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Sulphate 2,1 mg/l 250 mg/l
0.8 %
Single value
Sodium <0,5 mg/l
below limit of quantification
200 mg/l
< 0.3 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (28 — most recent value per parameter)

Microbiology (2)

Microbiology – WVA Gemeinde Werfen - Versorgungsgebiet Imlau Ortsnetz
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Chemical parameters (3)

Chemical parameters – WVA Gemeinde Werfen - Versorgungsgebiet Imlau Ortsnetz
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2,0 mg/l 50 mg/l
4 %
Single value
Nitrate/50 + Nitrite/3 0,043 mg/l Single value
Nitrite <0,01 mg/l
below limit of quantification
0.1 mg/l
< 10 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – WVA Gemeinde Werfen - Versorgungsgebiet Imlau Ortsnetz
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,033 mg/l 0.5 mg/l
7 %
Single value
Chloride <1 mg/l
below limit of quantification
200 mg/l
< 0.5 % *
Single value
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 9 KBE/ml 100 1/ml Single value
Colony count 36 °C 12 KBE/ml 20 1/ml Single value
Colour farblos, klar, ohne Bodensatz Single value
Conductivity (25 °C) 193 µS/cm 2,500 µS/cm Single value
Iron <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Odour geruchlos Single value
Oxidisability <0,25 (+) mg O2/l
below limit of quantification
5 mg/l Single value
pH 8,1 6,5–9,5 Single value
Sodium <0,5 mg/l
below limit of quantification
200 mg/l
< 0.3 % *
Single value
Sulphate 2,1 mg/l 250 mg/l
0.8 %
Single value
Taste geschmacklos Single value
Temperature 8,1 °C Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (7)

Further parameters – WVA Gemeinde Werfen - Versorgungsgebiet Imlau Ortsnetz
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,30 mmol/l Single value
Calcium 36,3 mg/l 400 mg/l
9 %
Single value
Carbonate hardness 6,30 °dH Single value
Hydrogen carbonate 137 mg/l Single value
Magnesium 6,64 mg/l 150 mg/l
4 %
Single value
Potassium <0,5 mg/l
below limit of quantification
50 mg/l
< 1 % *
Single value
Total hardness 1,18 mmol/l Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gemeindewerfen.at/system/web/GetDocument.ashx?cts=1715001251&fileId=1381841 · 23.04.2024 · Probenahme 04.04.2024 · retrieved on 14/08/2026

WVA Gemeinde Werfen - VSG Werfen, Reichhofquelle

WVA Gemeinde Werfen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 04/04/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – WVA Gemeinde Werfen - VSG Werfen, Reichhofquelle
Parameter Value Parametric value Share of the parametric value Reference
Odour geruchlos Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gemeindewerfen.at/system/web/GetDocument.ashx?cts=1715001547&fileId=1349989 · 23.04.2024 · Probenahme 04.04.2024 · retrieved on 14/08/2026

Frequent questions about postcode 5450

How hard is the water in Postcode 5450?
WVA Gemeinde Werfen publishes a total hardness of 4,31 mmol/l for the supply zone Versorgungsgebiet Tenneck (WVA Gemeinde Werfen, Probenahmestelle AI Werkstatt) — that corresponds to 24.2 °dH. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 23.04.2024, retrieved on 14/08/2026.
How much nitrate is in the drinking water in Postcode 5450?
WVA Gemeinde Werfen publishes a nitrate value of 5,2 mg/l for the supply zone Versorgungsgebiet Tenneck (WVA Gemeinde Werfen, Probenahmestelle AI Werkstatt). The statutory parametric value is 50 mg/l; the measured value represents 10 % of the parametric value. Basis: 23.04.2024, retrieved on 14/08/2026.
Who supplies the drinking water in Postcode 5450?
WVA Gemeinde Werfen. The values shown here come from the supply zone Versorgungsgebiet Tenneck (WVA Gemeinde Werfen, Probenahmestelle AI Werkstatt) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.