Drinking water in 5222 (Austria)
For this postcode WV Lochen-Mattsee-Palting publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.
The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Wasserversorgung des Wasserverbandes Lochen-Mattsee-Palting; Probehahn Brunnen Scherschham
WV Lochen-Mattsee-PaltingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 8,5 mg/l | 50 mg/l | 17 % | Single value |
| Escherichia coli (E. coli) | n.n. KBE/100ml not detectable | 0/100 ml | — | Single value |
| Sulphate | 6,5 mg/l | 250 mg/l | 3 % | Single value |
| Sodium | 2,2 mg/l | 200 mg/l | 1 % | Single value |
Show all recorded parameters (19 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | n.n. KBE/100ml not detectable | 0/100 ml | — | Single value |
| Intestinal enterococci | n.n. KBE/100ml not detectable | 0/100 ml | — | Single value |
Chemical parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 8,5 mg/l | 50 mg/l | 17 % | Single value |
| Nitrite | < 0,003 mg/l below limit of quantification | 0.1 mg/l | < 3 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | < 0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Single value |
| Chloride | 4,2 mg/l | 200 mg/l | 2 % | Single value |
| Coliform bacteria | n.n. KBE/100ml not detectable | 0/100 ml | — | Single value |
| Colony count 22 °C | 9 KBE/ml | 100 1/ml | — | Single value |
| Colony count 36 °C | 4 KBE/ml | 20 1/ml | — | Single value |
| Conductivity (25 °C) | 459 µS/cm | 2,500 µS/cm | — | Single value |
| pH | 7,14 - | 6,5–9,5 | — | Single value |
| Sodium | 2,2 mg/l | 200 mg/l | 1 % | Single value |
| Sulphate | 6,5 mg/l | 250 mg/l | 3 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 5,37 mmol/l | — | — | Single value |
| Calcium | 93 mg/l | 400 mg/l | 23 % | Single value |
| Hydrogen carbonate | 328 mg/l | — | — | Single value |
| Magnesium | 10,5 mg/l | 150 mg/l | 7 % | Single value |
| Potassium | 1,02 mg/l | 50 mg/l | 2 % | Single value |
| Total hardness | 2,75 mmol/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Show 1 more supply zone in this postcode
Vor-Ort (Probenahme)
WV Lochen-Mattsee-PaltingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No core values are available for this zone yet.
Show all recorded parameters (1 — most recent value per parameter)
Indicator parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Temperature | 10,4 °C | — | — | Single value · Vor-Ort (Probenahme) |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 5222
- How hard is the water in Postcode 5222?
- WV Lochen-Mattsee-Palting publishes a total hardness of 2,75 mmol/l for the supply zone Wasserversorgung des Wasserverbandes Lochen-Mattsee-Palting; Probehahn Brunnen Scherschham — that corresponds to 15.4 °dH. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 21.04.2026, retrieved on 14/08/2026.
- How much nitrate is in the drinking water in Postcode 5222?
- WV Lochen-Mattsee-Palting publishes a nitrate value of 8,5 mg/l for the supply zone Wasserversorgung des Wasserverbandes Lochen-Mattsee-Palting; Probehahn Brunnen Scherschham. The statutory parametric value is 50 mg/l; the measured value represents 17 % of the parametric value. Basis: 21.04.2026, retrieved on 14/08/2026.
- Who supplies the drinking water in Postcode 5222?
- WV Lochen-Mattsee-Palting. The values shown here come from the supply zone Wasserversorgung des Wasserverbandes Lochen-Mattsee-Palting; Probehahn Brunnen Scherschham and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.