Skip to content
maunawai.info

Drinking water in 5163 (Austria)

For this postcode Marktgemeinde Mattsee publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

GD Mattsee, TWA; nach UV-Anlage im Tiefbehälter

Marktgemeinde Mattsee

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
17.1 °dH
Key values GD Mattsee, TWA; nach UV-Anlage im Tiefbehälter
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) n.n. KBE/250ml
not detectable
0/100 ml Single value
Show all recorded parameters (14 — most recent value per parameter)

Microbiology (3)

Microbiology – GD Mattsee, TWA; nach UV-Anlage im Tiefbehälter
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) n.n. KBE/250ml
not detectable
0/100 ml Single value
Intestinal enterococci n.n. KBE/250ml
not detectable
0/100 ml Single value
Pseudomonas aeruginosa n.n. KBE/250ml
not detectable
0/100 ml Single value

Indicator parameters (8)

Indicator parameters – GD Mattsee, TWA; nach UV-Anlage im Tiefbehälter
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7,8 mg/l 200 mg/l
4 %
Single value
Clostridium perfringens (including spores) n.n. KBE/250ml
not detectable
0/100 ml Single value
Coliform bacteria n.n. KBE/250ml
not detectable
0/100 ml Single value
Colony count 22 °C n.n. KBE/ml
not detectable
100 1/ml Single value
Colony count 36 °C n.n. KBE/ml
not detectable
20 1/ml Single value
Conductivity (25 °C) 512 µS/cm 2,500 µS/cm Single value
pH 7,66 - 6,5–9,5 Single value
Turbidity < 0,1 NTU
below limit of quantification
Single value

Further parameters (3)

Further parameters – GD Mattsee, TWA; nach UV-Anlage im Tiefbehälter
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 6,09 mmol/l Single value
Hydrogen carbonate 17,0 °dH Single value
Total hardness 3,04 mmol/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.mattsee.at/system/web/getDocument.ashx?cts=1765800198&fileid=2127190 · 12.11.2025 · Probenahme-Datum 04.11.2025 · retrieved on 14/08/2026
Show 1 more supply zone in this postcode

Vor-Ort (Probenahme)

Marktgemeinde Mattsee

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Vor-Ort (Probenahme)
Parameter Value Parametric value Share of the parametric value Reference
Temperature 10,1 °C Single value · Vor-Ort (Probenahme)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.mattsee.at/system/web/getDocument.ashx?cts=1765800198&fileid=2127190 · 12.11.2025 · Probenahme-Datum 04.11.2025 · retrieved on 14/08/2026

Frequent questions about postcode 5163

How hard is the water in Postcode 5163?
Marktgemeinde Mattsee publishes a total hardness of 3,04 mmol/l for the supply zone GD Mattsee, TWA; nach UV-Anlage im Tiefbehälter — that corresponds to 17.1 °dH. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 12.11.2025, retrieved on 14/08/2026.
Who supplies the drinking water in Postcode 5163?
Marktgemeinde Mattsee. The values shown here come from the supply zone GD Mattsee, TWA; nach UV-Anlage im Tiefbehälter and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.