Skip to content
maunawai.info

Drinking water in 4890 (Austria)

For this postcode Gemeinde Weißenkirchen im Attergau publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 4 underneath.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Brunnenhaus (nach UV-Anlage)

Gemeinde Weißenkirchen im Attergau

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Brunnenhaus (nach UV-Anlage)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/250ml 0/100 ml Single value · Brunnenhaus (nach UV-Anlage)
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Brunnenhaus (nach UV-Anlage)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/250ml 0/100 ml Single value · Brunnenhaus (nach UV-Anlage)
Intestinal enterococci 0 KBE/250ml 0/100 ml Single value · Brunnenhaus (nach UV-Anlage)
Pseudomonas aeruginosa 0 KBE/250ml 0/100 ml Single value · Brunnenhaus (nach UV-Anlage)

Indicator parameters (10)

Indicator parameters – Brunnenhaus (nach UV-Anlage)
Parameter Value Parametric value Share of the parametric value Reference
Clostridium perfringens (including spores) 0 KBE/250ml 0/100 ml Single value · Brunnenhaus (nach UV-Anlage)
Coliform bacteria 0 KBE/250ml 0/100 ml Single value · Brunnenhaus (nach UV-Anlage)
Colony count 22 °C 1 KBE/ml 100 1/ml Single value · Brunnenhaus (nach UV-Anlage)
Colony count 36 °C 0 KBE/ml 20 1/ml Single value · Brunnenhaus (nach UV-Anlage)
Colour farblos, klar, ohne Bodensatz Single value · Brunnenhaus (nach UV-Anlage)
Conductivity (25 °C) 439 µS/cm 2,500 µS/cm Single value · Brunnenhaus (nach UV-Anlage)
Odour geruchlos Single value · Brunnenhaus (nach UV-Anlage)
pH 7,3 6,5–9,5 Single value · Brunnenhaus (nach UV-Anlage)
Taste geschmacklos Single value · Brunnenhaus (nach UV-Anlage)
Temperature 8,5 °C Single value · Brunnenhaus (nach UV-Anlage)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.weissenkirchen.ooe.gv.at/system/web/getDocument.ashx?cts=1767954507&fileid=4166314 · 09.12.2025 · Probenahme 03.12.2025 (Prüfungen 03.12.–09.12.2025) · retrieved on 14/08/2026
Show 4 more supply zones in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Wieneröth
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Wieneröth
Show all recorded parameters (12 — most recent value per parameter)

Microbiology (3)

Microbiology – Wieneröth
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Wieneröth
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value · Wieneröth
Pseudomonas aeruginosa 0 KBE/100ml 0/100 ml Single value · Wieneröth

Indicator parameters (9)

Indicator parameters – Wieneröth
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value · Wieneröth
Colony count 22 °C 2 KBE/ml 100 1/ml Single value · Wieneröth
Colony count 36 °C 1 KBE/ml 20 1/ml Single value · Wieneröth
Colour farblos, klar, ohne Bodensatz Single value · Wieneröth
Conductivity (25 °C) 429 µS/cm 2,500 µS/cm Single value · Wieneröth
Odour geruchlos Single value · Wieneröth
pH 7,3 6,5–9,5 Single value · Wieneröth
Taste geschmacklos Single value · Wieneröth
Temperature 8,0 °C Single value · Wieneröth

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.weissenkirchen.ooe.gv.at/system/web/getDocument.ashx?cts=1767954507&fileid=4166314 · 09.12.2025 · Probenahme 03.12.2025 (Prüfungen 03.12.–09.12.2025) · retrieved on 14/08/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Brandstatt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Brandstatt
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – Brandstatt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Brandstatt
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value · Brandstatt

Indicator parameters (9)

Indicator parameters – Brandstatt
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value · Brandstatt
Colony count 22 °C 86 KBE/ml 100 1/ml Single value · Brandstatt
Colony count 36 °C 48 KBE/ml 20 1/ml Single value · Brandstatt
Colour farblos, klar, ohne Bodensatz Single value · Brandstatt
Conductivity (25 °C) 432 µS/cm 2,500 µS/cm Single value · Brandstatt
Odour geruchlos Single value · Brandstatt
pH 7,3 6,5–9,5 Single value · Brandstatt
Taste geschmacklos Single value · Brandstatt
Temperature 8,4 °C Single value · Brandstatt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.weissenkirchen.ooe.gv.at/system/web/getDocument.ashx?cts=1767954507&fileid=4166314 · 09.12.2025 · Probenahme 03.12.2025 (Prüfungen 03.12.–09.12.2025) · retrieved on 14/08/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Röth
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Röth
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – Röth
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Röth
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value · Röth

Indicator parameters (9)

Indicator parameters – Röth
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value · Röth
Colony count 22 °C 1 KBE/ml 100 1/ml Single value · Röth
Colony count 36 °C 0 KBE/ml 20 1/ml Single value · Röth
Colour farblos, klar, ohne Bodensatz Single value · Röth
Conductivity (25 °C) 432 µS/cm 2,500 µS/cm Single value · Röth
Odour geruchlos Single value · Röth
pH 7,3 6,5–9,5 Single value · Röth
Taste geschmacklos Single value · Röth
Temperature 9,1 °C Single value · Röth

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.weissenkirchen.ooe.gv.at/system/web/getDocument.ashx?cts=1767954507&fileid=4166314 · 09.12.2025 · Probenahme 03.12.2025 (Prüfungen 03.12.–09.12.2025) · retrieved on 14/08/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Zieglstadl
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Zieglstadl
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – Zieglstadl
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Zieglstadl
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value · Zieglstadl

Indicator parameters (9)

Indicator parameters – Zieglstadl
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value · Zieglstadl
Colony count 22 °C 1 KBE/ml 100 1/ml Single value · Zieglstadl
Colony count 36 °C 0 KBE/ml 20 1/ml Single value · Zieglstadl
Colour farblos, klar, ohne Bodensatz Single value · Zieglstadl
Conductivity (25 °C) 435 µS/cm 2,500 µS/cm Single value · Zieglstadl
Odour geruchlos Single value · Zieglstadl
pH 7,2 6,5–9,5 Single value · Zieglstadl
Taste geschmacklos Single value · Zieglstadl
Temperature 9,3 °C Single value · Zieglstadl

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.weissenkirchen.ooe.gv.at/system/web/getDocument.ashx?cts=1767954507&fileid=4166314 · 09.12.2025 · Probenahme 03.12.2025 (Prüfungen 03.12.–09.12.2025) · retrieved on 14/08/2026

Frequent questions about postcode 4890

Who supplies the drinking water in Postcode 4890?
Gemeinde Weißenkirchen im Attergau. The values shown here come from the supply zone Brunnenhaus (nach UV-Anlage) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.