Skip to content
maunawai.info

Drinking water in 4153 (Austria)

One supply zone, water supplier: Gemeinde Julbach.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

WV Gemeinde Julbach – Hochbehälter Leithen, nach Entsäuerung (Probehahn nach Entsäuerung)

Gemeinde Julbach

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
6.7 °dH
Key values WV Gemeinde Julbach – Hochbehälter Leithen, nach Entsäuerung (Probehahn nach Entsäuerung)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 8,63 mg/l 50 mg/l
17 %
Single value
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Sulphate 6,8 mg/l 250 mg/l
3 %
Single value
Sodium 5,19 mg/l 200 mg/l
3 %
Single value
Show all recorded parameters (32 — most recent value per parameter)

Microbiology (3)

Microbiology – WV Gemeinde Julbach – Hochbehälter Leithen, nach Entsäuerung (Probehahn nach Entsäuerung)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value
Pseudomonas aeruginosa 0 KBE/100ml 0/100 ml Single value

Chemical parameters (3)

Chemical parameters – WV Gemeinde Julbach – Hochbehälter Leithen, nach Entsäuerung (Probehahn nach Entsäuerung)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 8,63 mg/l 50 mg/l
17 %
Single value
Nitrate/50 + Nitrite/3 0,176 mg/l Single value
Nitrite <0,01 mg/l
below limit of quantification
0.1 mg/l
< 10 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (17)

Indicator parameters – WV Gemeinde Julbach – Hochbehälter Leithen, nach Entsäuerung (Probehahn nach Entsäuerung)
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,011 mg/l 0.5 mg/l
2 %
Single value
Calcite dissolution capacity 0,953 mg/l Single value
Chloride 1,9 mg/l 200 mg/l
1 %
Single value
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 0 KBE/ml 100 1/ml Single value
Colony count 36 °C 2 KBE/ml 20 1/ml Single value
Colour farblos, klar, ohne Bodensatz Single value
Conductivity (25 °C) 241 µS/cm 2,500 µS/cm Single value
Iron <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Odour geruchlos Single value
Oxidisability <0,25 (+) mg O2/l
below limit of quantification
5 mg/l Single value
pH 7,80 6,5–9,5 Single value
Sodium 5,19 mg/l 200 mg/l
3 %
Single value
Sulphate 6,8 mg/l 250 mg/l
3 %
Single value
Taste geschmacklos Single value
Temperature 9,1 °C Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – WV Gemeinde Julbach – Hochbehälter Leithen, nach Entsäuerung (Probehahn nach Entsäuerung)
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,40 mmol/l Single value
Base capacity to pH 8.2 0,07 mmol/l Single value
Calcium 44,9 mg/l 400 mg/l
11 %
Single value
Carbonate hardness 6,58 °dH Single value
Hydrogen carbonate 143 mg/l Single value
Magnesium 2,01 mg/l 150 mg/l
1 %
Single value
Potassium 1,87 mg/l 50 mg/l
4 %
Single value
Saturation index -0,04 Single value
Total hardness 1,20 mmol/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 4153

How hard is the water in Postcode 4153?
Gemeinde Julbach publishes a total hardness of 1,20 mmol/l for the supply zone WV Gemeinde Julbach – Hochbehälter Leithen, nach Entsäuerung (Probehahn nach Entsäuerung) — that corresponds to 6.7 °dH. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 25.06.2026, retrieved on 26/08/2026.
How much nitrate is in the drinking water in Postcode 4153?
Gemeinde Julbach publishes a nitrate value of 8,63 mg/l for the supply zone WV Gemeinde Julbach – Hochbehälter Leithen, nach Entsäuerung (Probehahn nach Entsäuerung). The statutory parametric value is 50 mg/l; the measured value represents 17 % of the parametric value. Basis: 25.06.2026, retrieved on 26/08/2026.
Who supplies the drinking water in Postcode 4153?
Gemeinde Julbach. The values shown here come from the supply zone WV Gemeinde Julbach – Hochbehälter Leithen, nach Entsäuerung (Probehahn nach Entsäuerung) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.