Skip to content
maunawai.info

Drinking water in 4074 (Austria)

For this postcode Marktgemeinde Prambachkirchen (Wasserversorgung) publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
16 °dH
Key values Brunnen Gschnarret
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 28,1 mg/l 50 mg/l
56 %
Single value · Brunnen Gschnarret
Sulphate 31,8 mg/l 250 mg/l
13 %
Single value · Brunnen Gschnarret
Sodium 14,1 mg/l 200 mg/l
7 %
Single value · Brunnen Gschnarret
Show all recorded parameters (9 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Brunnen Gschnarret
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 28,1 mg/l 50 mg/l
56 %
Single value · Brunnen Gschnarret

Indicator parameters (4)

Indicator parameters – Brunnen Gschnarret
Parameter Value Parametric value Share of the parametric value Reference
Chloride 46.8 mg/l 200 mg/l
23 %
Single value · Brunnen Gschnarret
pH 7,2 -- 6,5–9,5 Single value · Brunnen Gschnarret
Sodium 14,1 mg/l 200 mg/l
7 %
Single value · Brunnen Gschnarret
Sulphate 31,8 mg/l 250 mg/l
13 %
Single value · Brunnen Gschnarret

Further parameters (4)

Further parameters – Brunnen Gschnarret
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 11,5 ° dH Single value · Brunnen Gschnarret
Magnesium 20,9 mg/l 150 mg/l
14 %
Single value · Brunnen Gschnarret
Potassium 2,34 mg/l 50 mg/l
5 %
Single value · Brunnen Gschnarret
Total hardness 16,0 ° dH Single value · Brunnen Gschnarret

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 1 more supply zone in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
12.1 °dH
Key values Netzprobe Langstögen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 20,8 mg/l 50 mg/l
42 %
Single value · Netzprobe Langstögen
Sulphate 46,1 mg/l 250 mg/l
18 %
Single value · Netzprobe Langstögen
Sodium 8,21 mg/l 200 mg/l
4 %
Single value · Netzprobe Langstögen
Show all recorded parameters (9 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Netzprobe Langstögen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 20,8 mg/l 50 mg/l
42 %
Single value · Netzprobe Langstögen

Indicator parameters (4)

Indicator parameters – Netzprobe Langstögen
Parameter Value Parametric value Share of the parametric value Reference
Chloride 11,0 mg/l 200 mg/l
5 %
Single value · Netzprobe Langstögen
pH 7,5 -- 6,5–9,5 Single value · Netzprobe Langstögen
Sodium 8,21 mg/l 200 mg/l
4 %
Single value · Netzprobe Langstögen
Sulphate 46,1 mg/l 250 mg/l
18 %
Single value · Netzprobe Langstögen

Further parameters (4)

Further parameters – Netzprobe Langstögen
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 9,49 ° dH Single value · Netzprobe Langstögen
Magnesium 15,0 mg/l 150 mg/l
10 %
Single value · Netzprobe Langstögen
Potassium 1,17 mg/l 50 mg/l
2 %
Single value · Netzprobe Langstögen
Total hardness 12,1 ° dH Single value · Netzprobe Langstögen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 4074

How hard is the water in Postcode 4074?
Marktgemeinde Prambachkirchen (Wasserversorgung) publishes a total hardness of 16 °dH for the supply zone Brunnen Gschnarret. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: Publication by the water supplier, retrieved on 14/08/2026.
How much nitrate is in the drinking water in Postcode 4074?
Marktgemeinde Prambachkirchen (Wasserversorgung) publishes a nitrate value of 28,1 mg/l for the supply zone Brunnen Gschnarret. The statutory parametric value is 50 mg/l; the measured value represents 56 % of the parametric value. Basis: Publication by the water supplier, retrieved on 14/08/2026.
Who supplies the drinking water in Postcode 4074?
Marktgemeinde Prambachkirchen (Wasserversorgung). The values shown here come from the supply zone Brunnen Gschnarret and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.