Skip to content
maunawai.info

Drinking water in 3361 (Austria)

For this postcode Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt) publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 8 underneath.

The values come from the Austrian drinking water database, to which water suppliers report voluntarily. In each case the highest value of the published range is given.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
13.7 °dH
Key values at-aschbach-markt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 5,34 mg/l 50 mg/l
11 %
Single value
Lead <0,0010 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Sulphate 6,9 mg/l 250 mg/l
3 %
Single value
Sodium 3,20 mg/l 200 mg/l
2 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (74 — most recent value per parameter)

Chemical parameters (33)

Chemical parameters – at-aschbach-markt gesamt
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,00020 (NWG) mg/l
below limit of quantification
3 µg/l
< 17 % *
Single value
Antimony <0,0010 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic <0,0010 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Benzene <0,00010 (NWG) mg/l
below limit of quantification
1 µg/l
< 30 % *
Single value
Benzo(a)pyrene <0,0000020 (NWG) mg/l
below limit of quantification
10 ng/l
< 50 % *
Single value
Benzo(b)fluoranthene <0,0000020 (NWG) mg/l
below limit of quantification
Single value
Benzo(ghi)perylene <0,0000020 (NWG) mg/l
below limit of quantification
Single value
Benzo(k)fluoranthene <0,0000020 (NWG) mg/l
below limit of quantification
Single value
Boron <0,020 mg/l
below limit of quantification
1 mg/l
< 2 % *
Single value
Bromodichloromethane <0,000030 (NWG) mg/l
below limit of quantification
Single value
Cadmium <0,00010 mg/l
below limit of quantification
5 µg/l
< 2 % *
Single value
Chromium <0,001 mg/l
below limit of quantification
50 µg/l
< 2 % *
Single value
Copper 0,0033 mg/l 2 mg/l
0.2 %
Single value
Dibromochloromethane <0,000030 (NWG) mg/l
below limit of quantification
Single value
Fluoride 0,05 mg/l 1.5 mg/l
3 %
Single value
Indeno(1,2,3-cd)pyrene <0,0000020 (NWG) mg/l
below limit of quantification
Single value
Lead <0,0010 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Mercury <0,000010 mg/l
below limit of quantification
1 µg/l
< 1 % *
Single value
Nickel <0,0010 mg/l
below limit of quantification
20 µg/l
< 5 % *
Single value
Nitrate 5,34 mg/l 50 mg/l
11 %
Single value
Nitrate/50 + Nitrite/3 0,110 mg/l Single value
Nitrite <0,01 mg/l
below limit of quantification
0.1 mg/l
< 10 % *
Single value
Polycyclic aromatic hydrocarbons <0,000050 mg/l
below limit of quantification
0.1 µg/l
< 50 % *
Single value
Selenium <0,0010 mg/l
below limit of quantification
20 µg/l
< 5 % *
Single value
Tetrachloroethene <0,00030 (NWG) mg/l
below limit of quantification
Single value
Tetrachloroethene and Trichloroethene (sum) <0,0010 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Tetrachloromethane <0,00003 (NWG) mg/l
below limit of quantification
Single value
Tribromomethane (bromoform) <0,000030 (NWG) mg/l
below limit of quantification
Single value
Trichloroethene <0,00030 (NWG) mg/l
below limit of quantification
Single value
Trichloromethane (chloroform) <0,000030 (NWG) mg/l
below limit of quantification
Single value
Trihalomethanes — Total <0,000030 (NWG) mg/l
below limit of quantification
30 µg/l
< 0.3 % *
Single value
Uranium 1,2 µg/l 15 µg/l
8 %
Single value
Vinyl chloride <0,000050 (NWG) mg/l
below limit of quantification
0.5 µg/l
< 30 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (18)

PFAS – at-aschbach-markt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Perfluorobutane sulfonic acid (PFBS) <0,0010 µg/l
below limit of quantification
Single value
Perfluorobutanoic acid (PFBA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorodecane sulfonic acid (PFDS) <0,0010 µg/l
below limit of quantification
Single value
Perfluorodecanoic acid (PFDA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorododecanoic acid (PFDoDA) <0,0010 µg/l
below limit of quantification
Single value
Perfluoroheptane sulfonic acid (PFHpS) <0,0010 µg/l
below limit of quantification
Single value
Perfluoroheptanoic acid (PFHpA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorohexane sulfonic acid (PFHxS) <0,0010 µg/l
below limit of quantification
Single value
Perfluorohexanoic acid (PFHxA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorononane sulfonic acid (PFNS) <0,0010 µg/l
below limit of quantification
Single value
Perfluorononanoic acid (PFNA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorooctanesulfonic acid (PFOS) <0,0010 µg/l
below limit of quantification
Single value
Perfluorooctanoic acid (PFOA) <0,0010 µg/l
below limit of quantification
Single value
Perfluoropentanesulfonic acid (PFPeS) <0,0010 µg/l
below limit of quantification
Single value
Perfluoropentanoic acid (PFPeA) <0,0010 µg/l
below limit of quantification
Single value
Perfluorotridecanoic acid (PFTrDA) <0,0010 µg/l
below limit of quantification
Single value
Perfluoroundecanesulfonic acid (PFUnDS) <0,0010 µg/l
below limit of quantification
Single value
Perfluoroundecanoic acid (PFUnDA) <0,0010 µg/l
below limit of quantification
Single value

Indicator parameters (11)

Indicator parameters – at-aschbach-markt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Ammonium 0,027 mg/l 0.5 mg/l
5 %
Single value
Chloride 4,8 mg/l 200 mg/l
2 %
Single value
Colour <0,5 m-1
below limit of quantification
Single value
Iron <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Oxidisability <0,25 (+) mg O2/l
below limit of quantification
5 mg/l Single value
Sodium 3,20 mg/l 200 mg/l
2 %
Single value
Sulphate 6,9 mg/l 250 mg/l
3 %
Single value
Total organic carbon (TOC) 0,60 mg/l Single value
Turbidity <0,25 NTU
below limit of quantification
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (12)

Further parameters – at-aschbach-markt gesamt
Parameter Value Parametric value Share of the parametric value Reference
1,1-Dichloroethene <0,000030 (NWG) mg/l
below limit of quantification
Single value
Acid capacity to pH 4.3 4,79 mmol/l Single value
Barium <0,010 mg/l
below limit of quantification
Single value
Calcium 55,7 mg/l 400 mg/l
14 %
Single value
Carbonate hardness 13,3 °dH Single value
Hydrogen carbonate 289 mg/l Single value
Magnesium 25,8 mg/l 150 mg/l
17 %
Single value
Phosphate <0,015 mg/l
below limit of quantification
Single value
Potassium 0,65 mg/l 50 mg/l
1 %
Single value
Spectral absorption coefficient 254 nm (SAC 254) 1,15 m-1 Single value
Total hardness 2,45 mmol/l Single value
Zinc <0,0010 mg/l
below limit of quantification
Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: at-aschbach-markt-b170d27ee.pdf · 18.03.2026 · Frühjahrsuntersuchung · retrieved on 11/08/2026
Show 8 more supply zones in this postcode

WV Gemeinde Aschbach Markt / Ortsnetz Aschbach-Markt

Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values WV Gemeinde Aschbach Markt / Ortsnetz Aschbach-Markt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – WV Gemeinde Aschbach Markt / Ortsnetz Aschbach-Markt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value
Pseudomonas aeruginosa 0 KBE/100ml 0/100 ml Single value

Indicator parameters (10)

Indicator parameters – WV Gemeinde Aschbach Markt / Ortsnetz Aschbach-Markt
Parameter Value Parametric value Share of the parametric value Reference
Clostridium perfringens (including spores) 0 KBE/100ml 0/100 ml Single value
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 4 KBE/ml 100 1/ml Single value
Colony count 36 °C 1 KBE/ml 20 1/ml Single value
Colour farblos, klar, ohne Bodensatz Single value
Conductivity (25 °C) 418 µS/cm 2,500 µS/cm Single value
Odour geruchlos Single value
pH 7,6 - 6,5–9,5 Single value
Taste geschmacklos Single value
Temperature 8,1 °C Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: at-aschbach-markt-b170d27ed.pdf · 18.03.2026 · Probenahme 05.03.2026 (Beginn der Prüfungen: 05.03.2026, Ende der Prüfungen: 09.03.2026) · retrieved on 11/08/2026

Hochbehälter Kreuzberg (Analyse 301282)

Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Hochbehälter Kreuzberg (Analyse 301282)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Hochbehälter Kreuzberg (Analyse 301282)
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – Hochbehälter Kreuzberg (Analyse 301282)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value · Hochbehälter Kreuzberg (Analyse 301282)
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value · Hochbehälter Kreuzberg (Analyse 301282)

Indicator parameters (9)

Indicator parameters – Hochbehälter Kreuzberg (Analyse 301282)
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value · Hochbehälter Kreuzberg (Analyse 301282)
Colony count 22 °C 13 KBE/ml 100 1/ml Single value · Hochbehälter Kreuzberg (Analyse 301282)
Colony count 36 °C 7 KBE/ml 20 1/ml Single value · Hochbehälter Kreuzberg (Analyse 301282)
Colour farblos, klar, ohne Bodensatz Single value · Hochbehälter Kreuzberg (Analyse 301282)
Conductivity (25 °C) 422 µS/cm 2,500 µS/cm Single value · Hochbehälter Kreuzberg (Analyse 301282)
Odour geruchlos Single value · Hochbehälter Kreuzberg (Analyse 301282)
pH 7,7 - 6,5–9,5 Single value · Hochbehälter Kreuzberg (Analyse 301282)
Taste geschmacklos Single value · Hochbehälter Kreuzberg (Analyse 301282)
Temperature 7,1 °C Single value · Hochbehälter Kreuzberg (Analyse 301282)

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: at-aschbach-markt-b170d27ec.pdf · 18.03.2026 · Probenahme 05.03.2026; Prüfung Beginn 05.03.2026 - Ende 09.03.2026 · retrieved on 11/08/2026

WV Gemeinde Aschbach Markt, Ortsnetz Brücke

Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values WV Gemeinde Aschbach Markt, Ortsnetz Brücke
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – WV Gemeinde Aschbach Markt, Ortsnetz Brücke
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Indicator parameters (9)

Indicator parameters – WV Gemeinde Aschbach Markt, Ortsnetz Brücke
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 2 KBE/ml 100 1/ml Single value
Colony count 36 °C 1 KBE/ml 20 1/ml Single value
Colour farblos, klar, ohne Bodensatz Single value
Conductivity (25 °C) 418 µS/cm 2,500 µS/cm Single value
Odour geruchlos Single value
pH 7,6 - 6,5–9,5 Single value
Taste geschmacklos Single value
Temperature 6,1 °C Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: at-aschbach-markt-b170d27ek.pdf · 18.03.2026 · Probenahme 05.03.2026, Prüfung 05.03.2026–09.03.2026 · retrieved on 11/08/2026

WV Gemeinde Aschbach Markt, Ortsnetz Markt- Neufeld

Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values WV Gemeinde Aschbach Markt, Ortsnetz Markt- Neufeld
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml
not detectable
0/100 ml Single value
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – WV Gemeinde Aschbach Markt, Ortsnetz Markt- Neufeld
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml
not detectable
0/100 ml Single value
Intestinal enterococci 0 KBE/100ml
not detectable
0/100 ml Single value

Indicator parameters (9)

Indicator parameters – WV Gemeinde Aschbach Markt, Ortsnetz Markt- Neufeld
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml
not detectable
0/100 ml Single value
Colony count 22 °C 5 KBE/ml 100 1/ml Single value
Colony count 36 °C 0 KBE/ml
not detectable
20 1/ml Single value
Colour farblos, klar, ohne Bodensatz Single value
Conductivity (25 °C) 417 µS/cm 2,500 µS/cm Single value
Odour geruchlos Single value
pH 7,5 - 6,5–9,5 Single value
Taste geschmacklos Single value
Temperature 5,7 °C Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: at-aschbach-markt-b170d27eh.pdf · 18.03.2026 · Probenahme 05.03.2026 · retrieved on 11/08/2026

WV Gemeinde Aschbach Markt / Ortsnetz Riesing / Aschbach Dorf

Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values WV Gemeinde Aschbach Markt / Ortsnetz Riesing / Aschbach Dorf
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – WV Gemeinde Aschbach Markt / Ortsnetz Riesing / Aschbach Dorf
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Indicator parameters (9)

Indicator parameters – WV Gemeinde Aschbach Markt / Ortsnetz Riesing / Aschbach Dorf
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 3 KBE/ml 100 1/ml Single value
Colony count 36 °C 0 KBE/ml 20 1/ml Single value
Colour farblos, klar, ohne Bodensatz Single value
Conductivity (25 °C) 416 µS/cm 2,500 µS/cm Single value
Odour geruchlos Single value
pH 7,5 - 6,5–9,5 Single value
Taste geschmacklos Single value
Temperature 7,2 °C Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: at-aschbach-markt-b170d27ei.pdf · 18.03.2026 · Probenahme 05.03.2026 · retrieved on 11/08/2026

WV Gemeinde Aschbach Markt, Ortsnetz Samesbruck (Entnahmestelle WL-619/004121, Probenahmestelle Al WH Waschküche,WB)

Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values WV Gemeinde Aschbach Markt, Ortsnetz Samesbruck (Entnahmestelle WL-619/004121, Probenahmestelle Al WH Waschküche,WB)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – WV Gemeinde Aschbach Markt, Ortsnetz Samesbruck (Entnahmestelle WL-619/004121, Probenahmestelle Al WH Waschküche,WB)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Indicator parameters (9)

Indicator parameters – WV Gemeinde Aschbach Markt, Ortsnetz Samesbruck (Entnahmestelle WL-619/004121, Probenahmestelle Al WH Waschküche,WB)
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 2 KBE/ml 100 1/ml Single value
Colony count 36 °C 1 KBE/ml 20 1/ml Single value
Colour farblos, klar, ohne Bodensatz Single value
Conductivity (25 °C) 422 µS/cm 2,500 µS/cm Single value
Odour geruchlos Single value
pH 7,6 - 6,5–9,5 Single value
Taste geschmacklos Single value
Temperature 6,0 °C Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: at-aschbach-markt-b170d27ej.pdf · 18.03.2026 · Probenahme 05.03.2026 · retrieved on 11/08/2026

WV Gemeinde Aschbach Markt, Übergabeschacht Krenstetten

Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values WV Gemeinde Aschbach Markt, Übergabeschacht Krenstetten
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – WV Gemeinde Aschbach Markt, Übergabeschacht Krenstetten
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Indicator parameters (9)

Indicator parameters – WV Gemeinde Aschbach Markt, Übergabeschacht Krenstetten
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 0 KBE/ml 100 1/ml Single value
Colony count 36 °C 1 KBE/ml 20 1/ml Single value
Colour farblos, klar, ohne Bodensatz Single value
Conductivity (25 °C) 418 µS/cm 2,500 µS/cm Single value
Odour geruchlos Single value
pH 7,6 6,5–9,5 Single value
Taste geschmacklos Single value
Temperature 6,0 °C Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: at-aschbach-markt-b170d27el.pdf · 18.03.2026 · Probenahme 05.03.2026 · retrieved on 11/08/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Further parameters (1)

Further parameters – Analyse 301281
Parameter Value Parametric value Share of the parametric value Reference
Spectral absorption coefficient 254 nm (SAC 254) 0,59 m-1 Single value · Analyse 301281

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: at-aschbach-markt-b170d27ec.pdf · 18.03.2026 · Probenahme 05.03.2026; Prüfung Beginn 05.03.2026 - Ende 09.03.2026 · retrieved on 11/08/2026

Frequent questions about postcode 3361

How hard is the water in Postcode 3361?
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt) publishes a total hardness of 2,45 mmol/l for the supply zone at-aschbach-markt gesamt — that corresponds to 13.7 °dH. Hardness indicates how much calcium and magnesium are dissolved in the water. It is not a quality assessment: there is no parametric value for hardness. Basis: 18.03.2026, retrieved on 11/08/2026.
How much nitrate is in the drinking water in Postcode 3361?
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt) publishes a nitrate value of 5,34 mg/l for the supply zone at-aschbach-markt gesamt. The statutory parametric value is 50 mg/l; the measured value represents 11 % of the parametric value. Basis: 18.03.2026, retrieved on 11/08/2026.
Who supplies the drinking water in Postcode 3361?
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt). The values shown here come from the supply zone at-aschbach-markt gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.